基于二次铝灰的地聚反应稳固化垃圾飞灰

基于工业生产铝过程中回收的二次铝灰（SAD）的地质聚合反应,提出了一种稳固化城市生活垃圾焚烧飞灰（MSWIFA）的新方法,分析硅铝物质的量之比对飞灰中重金属浸出浓度及地聚物固化体力学性能的影响规律.结果表明,当硅铝物质的量之比小于2.5时,二次铝灰-SiO₂基固化体与偏高岭土-SiO₂基固化体中的重金属浸出浓度均随着硅铝物质的量之比的增加而逐渐降低,2种固化体的抗压强度随着硅铝物质的量之比的增加而增加;硅铝物质的量之比达到2.5时,重金属的浸出浓度与固化体的抗压强度均趋于稳定.XRD分析结果显示,偏高岭土-SiO₂基固化体中聚合物的种类与数量均略高于二次铝灰-SiO₂基固化体.但从重金属的浸出浓度与固化体的抗压强度来看,2类固化体对飞灰中重金属的稳固化效果的差别很小,二次铝灰加上部分硅基材料可以作为偏高岭土的替代品,用于稳固化飞灰重金属的地质聚合反应中.二次铝灰-SiO₂基固化体的抗压强度达到13.65MPa,具备一定的力学性能,可用于部分特定的建筑材料.     

氮磷比对湖泊富营养化模型参数敏感性的影响

运用Morris方法研究了蓝藻暴发期不同氮磷比条件下,巢湖富营养化模型中蓝藻、溶解有机碳、营养物和溶解氧的参数敏感性.结果表明：蓝藻的敏感参数随氮磷比不同有显著差异;氮缺乏情况下,蓝藻对氮转化过程相关参数较敏感;磷缺乏情况下则反之.在任何氮磷比条件下,溶解有机碳、营养物和溶解氧等非生物变量都是对直接参与其自身转化过程的参数最为敏感,它们在不同氮磷比情况下的敏感参数差异较小.相比较蓝藻生长过程的参数,基础代谢过程的参数对所有变量的影响都更强.此外,各个参数的敏感性与它们的相互作用强度呈显著正相关,且这种相关性在极端氮或磷缺乏情况下尤为显著.本研究的结果有助于深入理解湖泊富营养化现象、改善富营养化模型模拟效果和精度.     

河北省顺平县地下水化学特征及其成因分析

为研究顺平县地下水化学特征及离子来源,服务顺平县水资源科学开发与管理,系统采集了县域33组岩溶水和12组孔隙水样品,综合利用Gibbs图、离子比值关系和多元统计分析方法,分析了顺平县各类型地下水水化学类型、组成特征和主要控制因素,评估各来源对地下水溶质的贡献率.结果表明,研究区孔隙水和岩溶水整体呈弱碱性,TDS变化范围分别为245.89～430.00mg·L^-1和223.54～1 347.80mg·L^-1;阴阳离子组分以HCO^-₃和Ca²⁺为主.研究区内地下水聚类分为PW1、PW2类孔隙水和KW1、KW2、KW3类岩溶水,PW1和KW1类为HCO₃-Ca·Mg型水,PW2为HCO₃·Cl-Ca·Mg型水,KW2为HCO₃·NO₃-Ca·Mg型水,KW3为高矿化度的SO₄-Ca·Mg型水.以白云石矿物为主的碳酸盐岩风化和以钠长石、钾长石为主的硅酸盐岩矿物风化是地下水主要的...     

大鹏湾表层沉积物中碳、氮、磷的多年调查结果和有机质来源分析

依据1998—2006年18个航次13个站的调查资料,简要描述和分析了大鹏湾表层沉积物中包括碳、氮、磷的多项生物地球化学要素多年的平均空间分布和年际变化,并依据TOC/TN原子比探讨沉积物中有机质的来源.结果表明,大鹏湾的水动力条件对沉积物中各生物地球化学要素的分布变化影响不大,TOC、TN和TP含量分别为(17600±4600) mg·kg^-1、(1738±446) mg·kg^-1和(562±89) mg·kg^-1,比珠江口和大亚湾高.9年调查期间,TOC、TC、TN和TP含量的年际变化趋势都是上升的,表明随着周边地区经济的迅速发展和人口的不断增加,产生的大量有机质通过小河流和地表径流排放入海,使大鹏湾中沉积物的环境逐渐恶化.TOC/TN原子比为12.4±2.5,介于海洋浮游生物源和陆生高等植物源之间,反映了大鹏湾表层沉积物中有机质是陆源和水生2种来源的混合输入.TOC/TN原子比呈逐年上升趋势,表明大鹏湾接受陆源有机质与水生有机质的比例逐渐增加.     

Mechanistic insight into the biofilm formation and process performance of a passive aeration ditch (PAD) for decentralized wastewater treatment

• A Passive Aeration Ditch was developed to treat decentralized wastewater. • A model was developed to describe the process performance. • A high C/N ratio facilitates microbial growth but nitrification deteriorates. • A high salinity decreases both organic and nitrogen contaminants removal. Decentralized wastewater containing elevated salinity is an emerging threat to the local environment and sanitation in remote coastal communities. Regarding the cost and treatment efficiencies, we propose a passive aeration ditch (PAD) using non-woven polyester fabric as a feasible bubbleless aerator and biofilm carrier for wastewater treatment. Consideration has been first given to PAD’s efficacy in treating saline decentralized wastewater, and then to the impact of chemical oxygen demand-to-nitrogen (C/N) ratio and salinity on biofilm formation. A multispecies model incorporating the salinity effect has been developed to depict the system performance and predict the microbial community. Results showed that the PAD system had great capacity for pollutants removal. The biofilm thickness increased at a higher C/N ratio because of the boost of aerobic heterotrophs and denitrifying bacteria, which consequently improved the COD and total nitrogen removal. However, this led to the deterioration of ammonia removal. Moreover, while a higher salinity benefited the biofilm growth, the contaminant removal efficiencies decreased because the salinity inhibited the activity of aerobic heterotrophs and reduced the abundance of nitrifying bacteria inside the biofilm. Based on the model simulation, feed water with salinity below 2% and C/N ratio in a range of 1 to 3 forms a biofilm that can reach relatively high organic matter and ammonia removal. These findings not only show the feasibility of PAD in treatment of saline decentralized wastewater, but also offer a systematic strategy to predict and optimize the process performance.     

Co-pyrolysis of oil sludge with hydrogen-rich plastics in a vertical stirring reactor: Kinetic analysis,emissions, and products

● Collaborative treatment of plastics and OS was established to improve oil quality. ● PE addition successfully improved OS pyrolysis process by deploying H/C_eff ratio. ● Higher H/C_eff ratio promoted cracking to obtain more gas and light oil fractions. ● The degradation of PE and OS was promoted each other under their temperature range. Pyrolysis is an effective method to treat oily sludge (OS) due to its balance between oil recovery and nonhazardous disposal. However, tank bottom OS contains a high content of heavy fractions, which creates obstacles for pyrolysis due to the high activation energy. The incomplete cracking of macromolecules and secondary polymerization decreases the oil quality and causes coking during the operation process. This study introduced polyethylene (PE) into OS to deploy the H/C_eff ratio of feedstocks for pyrolysis. A strong interaction between OS and PE during copyrolysis could be observed from the TG/DTG curves. PE tightly participated in OS degradation, while OS also promoted PE degradation at high temperature. Apparent pits were generated in solid residues from copyrolysis, which was attributed to the uniform and violent gas release. In addition to HCN, other nitrogenous and sulphurous pollutants were inhibited. Accordingly, more gas products were attained after PE addition with more value-added compositions of alkanes and alkenes. Although the oil yield decreased after PE addition, the oil products from copyrolysis possessed higher heating values and higher contents of light fractions with short chains as well as paraffins. Consequently, copyrolysis of OS and PE significantly improved the pyrolysis process and resulted in high oil quality.     

典型三床RTO设备燃爆危险性数值模拟研究*

为研究苯、甲苯、二甲苯混合废气在三床蓄热式废气焚烧炉内部的燃烧过程,基于FLUENT软件建立典型的三床蓄热式废气焚烧炉的物理模型和数值模型,重点分析进气风量和混合可燃气体-空气摩尔占比对其内部压力变化规律的影响,以期可为其安全设计提供借鉴。研究结果表明:燃烧室内的温度变化与燃烧速度变化保持一致,可通过监测RTO燃烧室内的温度来定性评估气体燃烧速度,随着进气风量的增加,混合废气燃烧速度先升高后下降后再升高;从能源损耗和安全生产2个方面综合考虑,得出RTO运行的最佳进气风量为15 000 m3/h到30 000 m3/h,最佳的混合可燃气体-空气摩尔占比为0.15~0.2,这与RTO实际工况相符合,解释RTO装置内废气积聚导致爆炸事故的原因,燃烧过程中压力出现2次峰值超压,实际生产中需在2个时间节点多加防范。     

CO2注气压力对CH4驱替特性影响实验研究*

为研究CO2驱替CH4过程中注气压力对气体解吸特性的影响,采用自主搭建的驱替实验平台,在0.6,0.8,1.0 MPa不同注气压力下进行驱替实验,研究CO2驱替CH4过程中煤层温度、气体浓度、置换效率和渗透率等变化规律。实验结果表明:提高CO2注气压力可提高CO2置换驱替煤层CH4的效果。随着注气压力增大,CH4累计解吸量增大,CO2突破时间越短,CO2封存量越大,置换效率升高,驱替比下降。注气压力为0.6,0.8,1.0 MPa时,CH4累计解吸量分别为90.2,94.1,97.8 L;CO2封存量分别为19.73,19.92,20.21 mL/g;置换效率由76.9%上升到80.2%再到82.9%,驱替比由3.28下降到3.17再到3.09。注气驱替CH4过程中煤层温度升高,可分为低速升温、高速升温和趋于平缓阶段。煤层温度最高变化量分别为9.4,11.5,12.7 ℃。同一注气压力下,煤层渗透率变化可分为缓慢增长、急剧下降和趋于稳定阶段。     

The downfall of mating: the effect of mate-carrying and flight muscle ratio on the escape ability of a pierid butterfly

In many species, the ability to evade predators is known to be periodically impaired by increased weight loads due to feeding and reproduction. Not only may extra weight reduce escape speed, but feeding and mating can also make the prey more noticeable to visually hunting predators. A number of butterfly species mate for hours, and if a mating couple is disturbed, one of the butterflies is responsible for flying, whereas its partner remains still. This study investigated the ability of male Pieris napi butterflies to fly while mating, with the prediction that mate carrying impairs flight ability compared to single flying males and that males with relatively high flight muscle ratios (FMR; male thorax mass/male + female body mass) will have better flight performance in copula. Our results clearly show that whereas single males always take off at steep angles and fly upwards, couples invariably have a negative take-off angle and rarely gain height. Moreover, landing height of the couples is positively associated with higher FMR. Hence, male flight ability when in copula is positively associated with a high relative thorax mass. Butterfly pairs may thus be at greater risk of predation as a consequence of their impaired flight ability, especially couples with critically low FMRs (<16%).