Performance of Firefighters’ Protective Clothing After Heat Exposure

Heat and mechanical protection properties of 6 fabric combinations commonly used in firefighters’ protective clothing were assessed before and after different heat treatment. It was shown that after heat exposure, the values obtained were generally lower than in the original state. The mechanical properties of the materials were more affected by heat than by heat protective properties. In 2 cases, degradation started before a visible change in the material could be observed, which might be potentially dangerous for the end user who will not realize the alteration of the material.     

Risk Factors to Musculoskeletal Disorders and Anthropometric Measurements of Filipino Manufacturing Workers

This study looked into the risk factors to musculoskeletal disorders and established anthropometric measurements of Filipino workers in 29 manufacturing industries. Anthropometric measurements of 1,805 workers were taken, and 495 workers were surveyed. Limitation of motion was found in 0.8% of the respondents, affectation in activities of daily living was seen in 1.6% and 3.2% felt discomfort in the head and neck. Upper trunk and low back pain was experienced by 23.8%. Odds ratio results (p = .05) showed that it is 29 times likely for workers to develop low back pain when they stand for 2-8 hrs a day than when they sit all the time. Anthropometry can be used for the design ofworkstations and work furniture.     

Investigation of Blended Fibre Filtering Materials

Five variants of mixtures of different synthetic fibres at different area ratios were manufactured into needled nonwovens intended to be used as a filtering material for respiratory protection. Two variants were produced according to an earlier patent, and the contents of the other three was completely new. Samples of the nonwovens were tested for sodium chloride particles penetration and for breathing resistance. The results showed that one variant of a nonwoven, designated PP/PPFM, had very valuable filtering properties and that those properties were stable in time.     

医疗保健行业中的纳米材料：职业风险和预防

欧洲职业健康安全署近期发布电子纪要,解释了保健行业工作者在他们工作场所的日常活动中如何与纳米材料发生可能的接触,并提供了预防潜在接触可以采取的措施。这些措施包括国家层面的法律监管、消除与替代、工程控制、管理措施以及个体防护装备（PPE）。作者特编译此文,为国内相关领域提供参考。     

警用防暴装备的研究进展及应用分析

在警员执法过程中,来自刀具、钝器等器材的暴力伤害无处不在。防暴装备作为一种重要的警用防护器材是保护警员的重要手段。本文对各类防暴装备的相关标准和研究进展进行了介绍,分析和比较了各类防暴装备的防暴机理及防暴性能,阐述了各类防暴装备的应用范围,最后对防暴装备的应用和研究提出了建议。     

Efficiency of Filtering Materials Used in Respiratory Protective Devices Against Nanoparticles

The basic aim of this research was to establish the efficiency of filtering materials widely used in respiratory protection devices with particular interest in their porosity, degree of electric and changeable process parameters, such as the flow rate of the test nanoaerosol and the size range of nanoparticles. Tests were carried out with an NaCl solid aerosol of 3.2 × 10⁵ particles/cm³ for the range of particle size of 7–270 nm, at aerosol flow rate of 1800, 2700, 3600, 4500 and 5400 L/h. The tests showed that electrospun nonwovens were the most effective filtering materials for nanoparticles over 20 nm. Melt-blown electret nonwovens with lower porosity than electrospun nonwovens had higher values of penetration of 1%–4%. Those materials provided very efficient protection against nanoparticles of certain sizes only.     

Analytical Study of the Heat Loss Attenuation by Clothing on Thermal Manikins Under Radiative Heat Loads

For wearers of protective clothing in radiation environments there are no quantitative guidelines available for the effect of a radiative heat load on heat exchange. Under the European Union funded project ThermProtect an analytical effort was defined to address the issue of radiative heat load while wearing protective clothing. As within the ThermProtect project much information has become available from thermal manikin experiments in thermal radiation environments, these sets of experimental data are used to verify the analytical approach. The analytical approach provided a good prediction of the heat loss in the manikin experiments, 95% of the variance was explained by the model. The model has not yet been validated at high radiative heat loads and neglects some physical properties of the radiation emissivity. Still, the analytical approach provides a pragmatic approach and may be useful for practical implementation in protective clothing standards for moderate thermal radiation environments.     

铁路长大隧道健康状况远程监测诊断装备系统研究

基于服役期铁路长大隧道健康状况劣化影响因素分析,结合隧道衬砌结构特点和健康状况监测实际,采用智能传感、信息融合、故障诊断技术,构建集监测、诊断、评估于一体的长大隧道健康状况远程监测诊断装备系统。研究系统的软硬件设施及其布设技术,建立长大隧道健康状况综合评估体系,给出健康诊断量化评估标准。以国内某铁路长大隧道为例,对其健康状况实施远程监测与诊断分析。结果表明,该条服役隧道健康问题的主要影响因素为隧道衬砌漏水、隧道衬砌裂缝、隧道衬砌变形、隧道衬砌剥落等病害,尤以隧道衬砌变形最为严重,健康等级为4级。     

Success factors and barriers in re-use of electrical and electronic equipment

This paper aims to identify specific and generic success factors and barriers in the re-use of electrical and electronic equipment for a variety of different operating models. The scope of the study is information and communication technologies (ICT) and large household appliances. Success factors and barriers for re-use were identified through the conducting of semi-structured interviews with 28 case study partners representing the different models. A list of generic success factors and barriers was identified. From this generic list, the re-use success factors and barriers were ranked by the interviewees with regards to their importance. On the one hand, the difficulty in accessing sufficient volumes of good quality used equipment and the lack of legislations, which support, incentivize and – if necessary – enforce this access, were identified as most impactful barriers. On the other hand, the control and securing of product and process quality were ranked as most important success factors. Re-use organisations, which adhere to good re-use practices, differentiate themselves through quality guarantee from non-compliant, informal competitors. Moreover, proven quality strengthens confidence in re-use of important stakeholders like suppliers, customers, authorities and the general public. Differences in reuse barriers and success factors were also explored for varying geographical regions, product category and operating models.     

模糊控制在湿法脱硫烟气系统中的应用

介绍了石灰石-石膏湿法脱硫装置烟气系统的设计情况,重点讲述了增压风机动叶的控制,针对增压风机动叶系统时滞、非线性等特点,常规PID控制效果并不理想,设计出模糊控制器,仿真后证明了理论的正确性。