Environmental behaviors of phoxim with two formulations in bamboo forest under soil surface mulching

Phoxim (emulsifiable concentrate (EC) and granules (G)) has been widely used in bamboo forests. The persistence and magnitude of phoxim residues in the crop and soil must be investigated to ensure human and environmental safety. The environmental behaviors of the two formulations were investigated in a bamboo forest under soil surface mulching conditions (CP) and non-covered cultivation conditions (NCP). The half-lives of phoxim in soil under the two conditions in soil were 4.1–6.2 days (EC) and 31.5–49.5 days (G), respectively. Phoxim in EC could be leached from the topsoil into the subsoil. A minimized leaching effect was observed for G under NCP. Inversely, an enhanced leaching effect was observed for G under CP. The G formulation resulted in more parent compound (in bamboo shoots) and metabolite (in soil) residues of phoxim than in the case of EC, especially under CP conditions. In addition, the intensity and duration of the formulation effect on soil pH adjustment from G were more obvious than that from EC. Results showed that the environmental behaviors (distribution, degradation, residue) of phoxim in the bamboo forest were significantly influenced by the type of formulation. The prolongation effect from phoxim G might cause persistence and long-term environmental risk. However, bamboo shoot consumption could be considered relatively safe after applying the recommended dose of the two phoxim formulations.     

东江流域表层土中全氟化合物的空间分布及来源解析

为探究东江流域土壤中全氟化合物(perfluorinated compounds,PFCs)分布特征和潜在来源,2013年8月采集东江流域19份表层土样品,利用高效液相色谱-串联质谱联用(HPLC-MS/MS)技术分析了16种PFCs的含量。结果表明,东江流域表层土总PFCs(∑PFCs)含量范围在2.15~5.49μg/kg dw。所采集的表层土样品中,东江东莞段土壤∑PFCs含量明显高于惠州段,全氟辛烷磺酸(0.65~1.28μg/kg dw)为最主要的污染物。与国内相关研究数据相比,东江流域土壤PFCs含量水平整体较高,这可能与流域产业结构和经济活动有关。主成分分析结果表明,电镀防雾剂、食品包装和全氟羧酸的生产过程、大气沉降、电化学氟化过程为东江流域土壤中PFCs的主要来源。与土壤有机质含量相关性研究表明,PFCs更容易分配到有机质含量高的土壤中,且随着PFCs分子碳链的增加,这种趋势更加显著。     

典型喀斯特小流域水文水化学过程对旱季暴雨的响应

通过定位监测和样品跟踪采集,在旱季对喀斯特小流域连续20天无前期降雨的一场暴雨(累计降雨量64mm)水文水化学过程进行了动态监测,并分析了相关的影响因素。结果表明,小降雨事件(8.5mm)未能引起溪流水位、电导率及温度的明显变化,而当累计降雨量达到35.5mm后溪流水开始响应。此后,溪流水文水化学参数对降雨快速响应,除硝态氮外,电导率(EC)、δ18 O、Ca2+迅速降至最低值,雨水稀释作用对其水化学变化起主要作用。通过对溪流新旧水比例进行划分发现,降雨前期和后期,溪流以旧水补给为主,而在水位快速上涨阶段,新水比例达到34%左右。两次降雨过程中,在溪流水水位升高的情况下,水体中硝态氮浓度仍然表现出高于雨前浓度的趋势。该研究为该区旱季小流域水资源利用和污染物防治方面提供了一定理论依据。     

固相膜萃取-气相色谱法测定地表水中有机氯农药研究

研究了固相膜萃取对地表水中有机氯农药(OCPs)物质的提取效果,并与液液提取法(LLE)进行比较.建立了固相膜萃取/气相色谱法检测地表水中20种有机氯农药的方法.结果表明:当萃取膜为HLB膜,洗脱液溶剂为丙酮和正己烷,萃取效果最理想,20种OCPs的回收率稳定在74.1%~94.3%之间,固相膜萃取法与传统液液提取法相比,既提高了萃取效率同时又减少了有机萃取溶剂的用量.该法检测实际样品时,同时加入2种内标指示剂对方法的性能进行了验证,2种内标示踪剂的回收率分别为71.6%~94.8%和69.9%~109.5%,样品中20种OCPs均未检出.     

河口盐沼植物分布对有效光合辐射的响应

对东滩植被带光量子通量密度的调查研究表明:互花米草带与海三棱藨草带光量子通量密度没有显著性差异,其值分别为1 570和1 556μmol/(m2·s)。光照对两物种的生长、繁殖等植物行为的影响只取决于其对光照的利用能力和效率;在互花米草和海三棱藨草混生带,到达互花米草和海三棱藨草的光量子通量密度之间存在显著差异(P0.05),互花米草对海三棱藨草的遮荫效应达63%,表明互花米草对海三棱藨草具有强的遮荫作用。光照不足严重影响海三棱藨草的生长,在混生带,海三棱藨草生长速率降低,种群密度和生物量减少,植株高度增加。因此,互花米草对海三棱藨草的遮荫作用,抑制了海三棱藨草在中潮滩的更新过程,因而也是造成海三棱藨草生境丧失的重要原因之一。     

HNO_3在气相及SiO_2表面的紫外光解反应

利用紫外及红外吸收光谱等分析手段对365 nm光照下HNO3在气相与SiO2表面的光解反应进行了研究.考察了HNO3浓度、光照时间、相对湿度等条件对反应的影响.结果表明:随着HNO3浓度及光照时间的增加,光解产生的NO2和NO浓度均呈指数增加;无水汽情况下,400 Pa的HNO3光解45 min后,产生NO2及NO浓度比气相光解产生的分别高约3及1.7倍.HNO3光解产生的HONO的浓度随相对湿度的增加而呈线性增加,在SiO2颗粒物表面光解产生的NO2浓度随着相对湿度的增加而减少,而NO浓度则随之增大.400 Pa的HNO3光照45 min后,SiO2表面光解产生的HONO浓度是气相光解的3倍、SiO2表面暗反应的约30倍.     

Influence of sewage culvert cover plate thickness on dynamic response and damage of the cover plate under gas explosion

In order to address the risk of combustible gas explosions in sewage culverts, a numerical model was established using ANSYS/LS-DYNA software. The model consisted of a culvert and a cover plate, and was used to study the effect of cover plate thickness (ranging from 0.08 m to 0.12 m) on the dynamic response and damage of the structure under explosive loads. The results indicated that, during the loading negative pressure stage, the equivalent stress peak value of the central monitoring unit of the cover plate first increased and then decreased with increasing cover plate thickness. Additionally, the maximum principal stress peak value first decreased and then increased, while the maximum shear stress peak value first increased and then decreased. During the loading positive pressure stage, the maximum principal strain peak value of the monitoring unit decreased overall with increasing cover plate thickness. However, the equivalent plastic strain peak value initially increased and then decreased gradually. The equivalent strain indicated that plastic damage occurred in the cover plate. Beyond a thickness of 0.11 m, increasing the cover thickness did not appear to enhance its resistance to plastic damage. The damage analysis revealed that as cover plate thickness increased, the peak displacement and velocity of the monitoring unit continued to decrease, while the overall stability and explosive resistance of the cover plate increased. Additionally, the number of damaged fragments decreased. However, once the cover plate thickness reached 0.11 m, the bonding performance of the reinforced concrete structure had been fully developed, increasing the thickness of the cover plate no longer had a significant impact on the explosive resistance of the cover plate.     

Effect of particle size on CO adsorption and thermodynamic analysis

The liquid nitrogen adsorption method was used to characterize the pore structure of non-cohesive coal in the 061,404 working face of the Lingxin coal mine. The amount of specific surface area of micropores in the sample continuously rose as particle sizes reduced. The volumetric method was used to measure the CO isothermal adsorption curves of three samples (sample I, 0.425–0.25 mm, sample II, 0.18–0.25 mm, and sample III, 0.15–0.18 mm). The experimental results were fitted by the Langmuir model. According to the experimental results, it was conducive to CO adsorption with the conditions of high pressure and low-temperature. The decrease in grain diameter increased the number and volume of micropores in the sample, which improved the adsorption capacity of the sample. In addition, according to the adsorption data, the CO adsorption thermodynamics of three samples were analyzed, including surface potential (Ω), Gibbs free energy change (ΔG) and entropy change (ΔS). The results demonstrated that CO adsorption by coal was a spontaneous process. Sample III has the most substantial adsorption capacity, whereas the sample I has the weakest adsorption capacity.     

Immediate behavioural responses to earthquakes in Christchurch,New Zealand,and Hitachi,Japan

This study examines people's immediate responses to earthquakes in Christchurch, New Zealand, and Hitachi, Japan. Data collected from 257 respondents in Christchurch and 332 respondents in Hitachi revealed notable similarities between the two cities in people's emotional reactions, risk perceptions, and immediate protective actions during the events. Respondents' physical, household, and social contexts were quite similar, but Hitachi residents reported somewhat higher levels of emotional reaction and risk perception than did Christchurch residents. Contrary to the recommendations of emergency officials, the most frequent response of residents in both cities was to freeze. Christchurch residents were more likely than Hitachi residents to drop to the ground and take cover, whereas Hitachi residents were more likely than Christchurch residents to evacuate immediately the building in which they were situated. There were relatively small correlations between immediate behavioural responses and demographic characteristics, earthquake experience, and physical, social, or household context.     

Integrated disaster relief logistics: a stepping stone towards viable civil–military networks?

The twenty‐first century has seen a significant rise in all forms of disasters and this has resulted in military and humanitarian organisations becoming more frequently engaged in the provision of support to those affected. Achieving an efficient and effective logistic preparation and response is one of the key elements in mitigating the impact of such events, but the establishment of mechanisms to deliver an appropriately integrated civil–military approach remains elusive. Not least because of the high percentage of assistance budgets spent on logistics, this area is considered to represent fertile ground for developing improved processes and understanding. In practice, the demands placed on civilian and military logisticians are broadly similar, as is the solution space. Speaking a common language and using common concepts, it is argued, therefore, that the logistic profession should be in the vanguard of the development of an improved civil–military interface.