Safety of stationary grinding machines – impact resistance of work zone enclosures

Guards on machine tools are intended to protect persons from being injured by parts ejected with high kinetic energy from the work zone of the machine. Stationary grinding machines are a typical example. Generally such machines are provided with abrasive product guards closely enveloping the grinding wheel. However, many machining tasks do not allow the use of abrasive product guards. In such cases, the work zone enclosure has to be dimensioned so that, in case of failure, grinding wheel fragments remain inside the machine’s working zone. To obtain data for the dimensioning of work zone enclosures on stationary grinding machines, which must be operated without an abrasive product guard, burst tests were conducted with vitrified grinding wheels. The studies show that, contrary to widely held opinion, narrower grinding wheels can be more critical concerning the impact resistance than wider wheels although their fragment energy is smaller.     

提高材料利用率的有效途径

从运用数冲编程技巧、改进加工方案和改进结构设计三方面阐述了提高利用率的方法。     

数控机床的故障诊断

针对数控机床的故障特点，主要介绍了数控机床机械类故障和电气类故障的诊断程序和诊断方法。     

腈纶装置烘燥机自燃的原因及预防措施

分析了上海石化腈纶事业部金阳装置二步法纺丝后处理使用的第二烘燥机在高温高热状态下运行,设备内部经常发生自燃现象的原因和预防措施。     

羧酸及其衍生物急性毒性的QSAR研究

基于定量结构-活性相关性(QSAR)原理,研究了27种羧酸及其衍生化合物结构与其急性毒性LC50之间的内在定量关系。应用遗传算法从大量结构参数中优化筛选出与LC50最为密切相关的五个参数作为分子描述符,得出影响羧酸及其衍生物急性毒性的主要结构特征为分子的大小及其空间效应等。分别采用支持向量机(SVM)方法和多元线性回归(MLR)方法建立了相应的QSAR预测模型,并对所建模型分别进行了内部验证和外部验证。结果表明,两种模型均具有较高的稳定性、预测能力及泛化性能。其中,支持向量机模型对训练集和预测集样本的预测平均绝对误差分别为0.149和0.211,优于多元线性回归方法所得结果。     

“2009年全国生态经济建设理论与实践学术研讨会”综述

“2009年全国生态经济建设理论与实践学术研讨会”于2009年7月22日在甘肃行政学院隆重举行。围绕“发展循环经济与建设生态文明”的主题,从5个方面展开讨论;中西部地区发展循环经济的路径选择、绿色新政与绿色经济、马克思主义生态经济学和生态马克思主义经济学的联系与区别、国内研究循环经济的主要力量及低碳经济。     

Correction model for CO detection in the coal combustion loss process in mines based on GWO-SVM

Accurate detection of CO gas is crucial to the prevention of coal combustion. Tuneable diode laser absorption spectroscopy (TDLAS) is a reliable method for CO detection during coal combustion. The influences of temperature and pressure cause changes in the line strength and linewidth of the index gases’ absorption spectra, leading to sizable measurement errors. To correct the distortion of the CO absorption spectrum caused by temperature and pressure fluctuation, a compensation model based on the grey wolf optimizer–support vector machine (GWO–SVM) was proposed. The results were compared with those of the single SVM, the back propagation neural network (BPNN), and multiple regression analysis (MRA). MRA was revealed to result in the lowest accuracy, which indicated that MRA is not ideal for compensation in TDLAS. The hyperparameter selection of the SVM had the disadvantages of randomness and blindness, which led to instability and large errors. The BPNN achieved better correction in the training stage, but severe overfitting occurred in the testing stage. The modified results revealed that the GWO–SVM model had higher accuracy and stability than the other models. It effectively inhibited the effects of temperature and pressure on the measured concentration and greatly improved the measurement accuracy. The equipment is thus suitable for CO gas detection with the aim to preventing coal combustion loss, and it can be further applied to loss prevention in other process fields.     

SVM与ANN在湖泊富营养化评价中的对比研究

支持向量机是由Vapnik等提出的建立在统计学习理论基础上的一种新的机器学习方法,由于其使用结构风险最小化原则代替经验风险最小化原则,又由于其应用了核函数思想,它可以较好地解决非线性问题;人工神经网络(ANN)已经较成功解决模式识别和任意非线性函数回归问题,但是存在训练样本不足,并可能出现过拟合现象。SVM的结构风险最小化算法引起了科学界的关注,对传统基于经验风险最小化的神经网络算法提出了挑战,文章介绍了SVM和ANN的基本原理,并对二者在巢湖富营养化水平评价上做对比研究,结果表明,ANN比较容易陷入局部最优,支持向量机评价结果更加符合实际。     

A framework to minimise total energy consumption and total tardiness on a single machine

A great amount of energy is wasted in industry by machines that remain idle due to underutilisation. A way to avoid wasting energy and thus reducing the carbon print of an industrial plant is to consider minimisation of energy consumption objective while making scheduling decisions. To minimise energy consumption, the decision maker has to decide the timing and length of turn off/turn on operation (a setup) and also provide a sequence of jobs that minimises the scheduling objective, assuming that all jobs are not available at the same time. In this paper, a framework to solve a multiobjective optimisation problem that minimises total energy consumption and total tardiness is proposed. Since total tardiness problem with release dates is an NP‐hard problem, a new greedy randomised multiobjective adaptive search metaheuristic is utilised to obtain an approximate pareto front (i.e. an approximate set of non‐dominated solutions). Analytical Hierarchy Process is utilised to determine the ‘best’ alternative among the solutions on the pareto front. The proposed framework is illustrated in a case study. It is shown that a wide variety of dispersed solutions can be obtained via the proposed framework, and as total tardiness decreases, total energy consumption increases.     

基于随机森林模型的辽河高时间分辨率氮、磷浓度模拟与预测

随着环境信息获取技术的飞速发展,水质监测数据逐渐呈现出高时间分辨率的特点.针对传统方法在模拟高频检测数据时的不足,本文基于随机森林建立了河流氮、磷逐日浓度预测模型,识别了影响辽河干流马虎山断面氮、磷浓度变化的主要因素,并预测了未来不同情景下氮、磷浓度变化特征.结果表明：①马虎山断面氮、磷浓度变化的主要影响因素是上游珠尔山断面的来水水质和本断面的流量;②随机森林模型在高时间分辨率的水质指标模拟中具有误差低和拟合优度高的特点,其中,TN浓度预测模型的RMSE为0.40 mg·L^-1,R²为0.95,TP浓度预测模型的RMSE为0.01 mg·L^-1,R²为0.96;③在不同水文、污染控制和来水水质的变化情景下,未来马虎山断面氮、磷浓度变化主要取决于上游 来水水质,加强全流域营养盐控制是确保断面水质稳定达标的重要基础.