环境空气自动监测车仪器路况试验分析

利用环境空气自动监测车对辖区内空气自动站进行巡检及应急监测中,越来越显示其灵活、可移动的优势,但在长距离行驶后是否因路况影响仪器的正常运行,对监测车仪器能否达到监测质量控制对仪器性能指标的要求,成为最为关心的问题,作者在各级路况开展了系统试验。通过试验得出,路况对监测车仪器影响不大,性能指标可以满足要求。     

施工工地出口附近道路交通扬尘排放特征研究

为了量化施工工地附近社会道路因施工运输车辆带泥及遗撒造成的二次交通扬尘,对4个典型工地出口2个方向社会道路尘负荷进行了采样分析,根据AP-42交通扬尘排放模型,计算和分析了工地出口附近道路交通扬尘排放特征.结果表明,工地出口附近道路尘负荷高于正常道路,随着距离工地出口长度的增加,尘负荷逐渐减小;工地出口2个方向共400 m道路上交通扬尘PM₁₀排放因子为正常道路的2～10倍,因施工增加的排放量相当于422～3?800 m正常道路排放.根据以上结果,结合2002年北京市施工工地时空分布数据,经计算得出,2002年北京市城八区工地出口形成的二次扬尘相当于增加了道路总长度的59%.     

某储罐区火灾多米诺效应场景推演

化工园区中危险源众多,一旦发生事故很容易在整个园区内蔓延和发展.针对化工园区内储罐密集,容易引发连锁反应导致事故扩大的特点,利用FDS软件对储罐火灾场景进行数值模拟,根据储罐所受热辐射确定化工园区内储罐火灾最可能的事故发生序列,并引入基于设备失效前时间的机械设备故障概率模型对罐区内单个储罐的火灾风险进行研究,得到储罐区...     

基于FHWA的兰州市道路交通噪声预测模型的建立

结合美国道路交通噪声污染预测模型(FHWA)和国内学者在该方面的大量研究成果,选择兰州市主、次干道共计52条、142个监测点的建模采样数据,并应用统计学原理分析了影响道路交通噪声的各个因子与道路交通噪声的相关性,最终得出了符合兰州市道路交通特征的噪声污染统计预测模型.随后通过兰州市15个监测点的预测与实测对比验证后发现二者具有较高的一致性,此模型可应用在兰州市道路交通噪声污染的预测评价中.     

我国汽车报废回收利用体系框架初探

主要介绍了国内外废旧汽车回收处理现状,并从法制建设、回收网络构建、回收技术研究、宣传教育等方面提出了我国应对废旧汽车回收利用的对策建议。     

基于大数据挖掘技术的地震舆情感知研究

对地震舆情信息的深入感知和有效管理,能够保障社会和谐发展.提出一个基于大数据技术和深度学习的地震舆情感知平台,基于Hadoop和MongoDB大数据技术实现对海量实时地震舆情数据的处理和存储.基于Word2vec和LSTM的融合模型能够有效实现震后网民的情感识别,为舆情预警提供支持.以台湾5.8级地震舆情数据为例,对该...     

基于Logistic回归的燃气管网风险因素重要度分析方法研究

为确定燃气管网风险评估的关键风险因素,以A省各地市燃气管网为研究对象,基于燃气专家经验确定燃气管线风险等级,提出基于Logistic回归的燃气管网风险因素重要度分析方法。采用样本增强及随机抽样的方式,选取400个均衡样本作为管网评估数据输入,通过因子分析方法对其进行降维,得到3个公共因子并作为一级指标反向构建燃气管网风险评估指标体系;利用有序多分类Logistic回归方法,根据回归系数绝对值大小对风险因素进行重要度排序。研究结果表明：外界环境对燃气管网风险的贡献程度相对较高,管道自身因素和巡检养护次之。研究结果可为城市燃气风险防控提供理论依据和方法参考。     

基于CA的城市形态扩展多解模拟——以北京市东部平原区情景分析为例

构建了一个基于人工神经网络的约束型城市扩展CA模型。利用该模型,预测了北京市东部平原区在3种情景规划之下的未来50年的城市形态,为不同的城市发展模式之间的比较分析奠定基础。然后以2024年的北京东部平原区模拟城市形态为基准,从自然生态功效、社会服务功效、经济利益功效3个方面对3种规划模式进行了情景分析,从而系统的比较了3种规划模式的复合生态功效,为城市规划决策提供有力的支持。     

Perceptions of safety on a shared road: Driving,cycling, or walking near an autonomous vehicle

Introduction: While improved safety is a highly cited potential benefit of autonomous vehicles (AVs), at the same time a frequently cited concern is the new safety challenges that AVs introduce. The literature lacks a rigorous exploration of the safety perceptions of road users who will interact with AVs, including vulnerable road users. Addressing this gap is essential because the successful integration of AVs into transportation systems hinges on an understanding of how all road users will react to their presence. Methods: A stated preference survey of the Phoenix, Arizona, metropolitan statistical area (Phoenix MSA) was conducted in July 2018. A series of ordered probit models was estimated to analyze the survey responses and identify differences between various population groups with respect to the perceived safety of driving, cycling, and walking near AVs. Results: Greater exposure to and awareness of AVs are not uniformly associated with increases in perceived safety. Various attitudinal factors, level of AV automation, and other intrinsic and extrinsic factors are related to safety perceptions of driving, walking, and cycling near AVs. Socioeconomic and demographic characteristics, such as gender, age, income, employment, and automobile usage and ownership, have various relationships with perceived safety. Conclusions: Cycling near an AV was perceived as the least safe activity, followed by walking and then driving near an AV. Both similarities and differences were observed among the factors associated with the perceived safety of different travel alternatives. Practical Applications: Public perception will guide the development and adoption of AVs directly and indirectly. To help maintain control of public perception, transportation planners, decision makers, and other stakeholders should consider more deliberate and targeted messaging to address the concerns of different road users. In addition, more careful pilot testing and more direct attention to vulnerable road users may help avoid a backlash that could delay the rollout of this technology.     

Application of dynamic risk analysis in offshore drilling processes

Process safety is the common global language used to communicate the strategies of hazard identification, risk assessment and safety management. Process safety is identified as an integral part of process development and focuses on preventing and mitigating major process accidents such as fires, explosions, and toxic releases in process industries. Accident probability estimation is the most vital step to all quantitative risk assessment methods. Drilling process for oil is a hazardous operation and hence safety is one of the major concerns and is often measured in terms of risk. Dynamic risk assessment method is meant to reassess risk in terms of updating initial failure probabilities of events and safety barriers, as new information are made available during a specific operation. In this study, a Bayesian network model is developed to represent a well kick scenario. The concept of dynamic environment is incorporated by feeding the real-time failure probability values (observed at different time intervals) of safety barriers to the Bayesian network in order to obtain the corresponding time-dependent variations in kick consequences. This study reveals the importance of real-time monitoring of safety barrier performances and quantitatively shows the effect of deterioration of barrier performance on kick consequence probabilities. The Macondo blowout incident is used to demonstrate how early warnings in barrier probability variations could have been observed and adequately managed to prevent escalation to severe consequences.