急倾斜上保护层开采保护效果的参数敏感度研究

为对急倾斜上保护层开采过程中,保护层开采多参数同时变化时的保护效果变化规律进行量化研究,将被保护层膨胀变形曲线的形态参数作为保护效果考察指标,基于可旋转CCD试验方案进行有限元计算,建立了保护层开采保护效果的响应面模型,得到了不同保护效果指标受多个保护层开采参数变异影响的敏感度。通过对急倾斜上保护层开采实例进行敏感度分析得到:范围相关保护效果指标受保护层开采参数变异影响的敏感度最高,位置相关保护效果指标敏感度次之,卸压程度相关保护效果指标敏感度最小。范围相关保护效果指标中,上部卸压角受侧压系数变异影响最敏感,敏感度为1.70;下部卸压角受层间距变异影响最敏感,敏感度为1.02;倾向保护范围长度受层间距变异影响最敏感,敏感度为-1.89。     

我国特种劳动防护用品产业分布特点分析

为了解我国特种劳动防护用品产业分布特点和产业市场集中程度,基于生产企业统计数据,估算我国特种劳动防护用品产业市场集中度;对比2017年和2010年数据,统计分析我国特种劳动防护用品产业的区域、产品种类、企业注册资金规模和企业从业人员数量的分布和变化,分析总结了产业发展呈现的特点,提出了加快我国特种劳动防护用品产业发展的相应建议。结果表明:当前我国特种劳动防护用品产业市场结构尚属于低集中竞争型;各区域生产企业数量按照东部、中部、西部和东北的顺序依次递减,东部生产企业占据全国企业总数的65%以上;一半以上企业的注册资金均大于1 000万元;以从业人员数量看,80%以上企业属于小型企业规模;与2010年相比,2017年我国特种劳动防护用品生产企业从业人员数量增加了6.67%,企业从业人员规模分布变化不明显,企业注册资金规模已由约7成企业在500万元以下转变为近7成超过500万元,产品种类增加了40%。研究结果可为我国劳动防护用品产业和安全产业的发展提供科学参考。     

阪神地震中地下结构和隧道的破坏现象浅析

概述了阪神地震中地铁车站和地下隧道所造成的破坏情况,说明了地下结构较之于地面结构具有更为良好的抗震性能,同时也说明在地下结构的抗震设计中应认真研究直下型地震的强地面运动破坏作用。     

冰对斜体结构作用的二维和三维力学模型分析

通常情况下，作用在斜体结构表面的冰力小于垂直结构，因此斜体结构成为有冰海区海洋结构的优选结构，冰对斜体结构作用力学机制的分析是近些年来国际上研究的热点问题。本文运用简单的二维理论及较为复杂的三维理论，依据辽东湾环境条件，采用计算与作图分析的手段，对摩擦系数、坡角、冰强度及冰厚如何影响作用在斜体结构上的水平冰力进行了讨论，并验证了相应结论     

Upstream-downstream cooperation approach in Guanting Reservoir watershed

A case study is introduced and discussed concerning water dispute of misuse and pollution between up- and down-stream parts. The relations between water usage and local industrial structures are analyzed. Results show it is important to change industrial structures of the target region along with controlling water pollution by technical and engineering methods. Three manners of upstream-downstream cooperation are presented and discussed based on the actual conditions of Guangting Reservoir watershed. Two typical scenarios are supposed and studied along with the local plan on water resources development. The best solution for this cooperation presents a good way to help the upstream developing in a new pattern of eco-economy.     

The acceptance of personal protective equipment among Hong Kong construction workers: An integration of technology acceptance model and theory of planned behavior with risk perception and safety climate

Introduction: The phenomenon that construction workers do not use personal protective equipment (PPE) is a major reason for the high occurrence frequency of accidents in the construction industry. However, little efforts have been made to quantitatively examine the factors influencing construction workers’ acceptance of PPE. Method: In the current study, a PPE acceptance model for construction workers (PAMCW) was proposed to address the noted need. The PAMCW incorporates the technology acceptance model, theory of planned behavior, risk perception, and safety climate for explaining construction worker acceptance of PPE. 413 construction workers participated in this study to fill out a structured questionnaire. The PAMCW was analyzed using structural equation modeling. Results: Results provide evidence of the applicability of the technology acceptance model and theory of planned behavior to the PPE acceptance among construction workers. The positive influence of safety climate and risk perception-severity on attitude toward using PPE was significant. Safety climate positively influences perceived usefulness. Risk perception-worry and unsafe was found to positively affect intention to use PPE. Practical Applications: Practical suggestions for increasing construction workers’ use of PPE are also discussed.     

Protective clothing for pesticide operators: part I – selection of a reference test chemical for penetration testing

A systematic approach was taken to develop a database for protective clothing for pesticide operators; results are reported as a two-part series. Part I describes the research studies that led to identification of a pesticide formulation that could serve as a reference test chemical for further testing. Measurement of pesticide penetration was conducted using different types of pesticide formulations. Six fabrics were tested using 10 formulations at different concentrations. Three formulations were subsequently selected for further testing. Analysis of the data indicated that, when compared with other formulations, mean percent penetration of 5% Prowl 3.3 EC [emulsifiable concentrate diluted to 5% active ingredient (pendimethalin)] is either similar to or higher than most test chemicals. Those results led to choosing 5% Prowl 3.3 EC as a reference test liquid. Part II of the study, published as a separate paper, includes data on a wide range of textile materials.     

生化防护材料的探讨

本文详述了生化防护材料的种类、性能特点,与防护服配件的协调、使用耐久性能以及成本等问题,得出了生化防护材料选用及设计的一般性结论。     

X射线防护服所需铅当量的研究与应用

铅当量是X射线防护服最重要的性能指标,铅当量的大小决定着X射线防护服屏蔽X射线的能力。X射线防护服的铅当量有不同的等级,需根据不同的X射线照射条件和工作情况选择使用。本文通过计算给出了几种常用管电压下防护服屏蔽散漏X射线所需的铅当量值,可为X射线防护服的使用单位或个人在购买和使用时提供参考。选择适合铅当量的X射线防护服,可以避免因选用的防护服或用具铅当量不足而达不到有效屏蔽X射线的效果,造成健康的危害;也可以避免因选用过大铅当量的X射线防护服或用具,致使作业人员过多负重,导致疲劳,发生人为失误,也可以避免造成不必要的经济浪费。另外,为了保证X射线防护服的使用效果,本文给出了X射线防护服的检验、贮存和使用等管理方法。     

基于模糊聚类的国防工程电磁脉冲防护策略探讨

为实现对国防工程内部众多电气设备进行有效合理的防护,达到国防工程对电磁脉冲的整体防护要求;以人防工程为例,分析人防工程内部电气设备的功能特点,确定其评估指标体系,利用模糊聚类的方法,对人防工程内部的电气设备进行模糊聚类,通过对模糊聚类结果的分析,探讨对不同种类的电气设备的防护策略。通过模糊聚类模型而实现的分类防护,可以提高人防工程对电磁脉冲的整体防护效率。采用的方法也可以应用到其他国防工程的电磁脉冲分类防护中去。