循环半干法脱硫除尘设备布置于两串联引风机之间的工程实践

介绍了宁夏国电大武口发电厂2×110MW机组脱硫、除尘改造系统的配置形式,通过实际工程应用,分析各种因素对该布置形式脱硫、除尘系统的影响,并对出现的问题提出解决办法,为同类改造工程提供参考。     

The contemporary cement cycle of the United States

A country-level stock and flow model for cement, an important construction material, was developed based on a material flow analysis framework. Using this model, the contemporary cement cycle of the United States was constructed by analyzing production, import, and export data for different stages of the cement cycle. The United States currently supplies approximately 80% of its cement consumption through domestic production and the rest is imported. The average annual net addition of in-use new cement stock over the period 2000–2004 was approximately 83 million metric tons and amounts to 2.3 tons per capita of concrete. Nonfuel carbon dioxide emissions (42 million metric tons per year) from the calcination phase of cement manufacture account for 62% of the total 68 million tons per year of cement production residues. The end-of-life cement discards are estimated to be 33 million metric tons per year, of which between 30% and 80% is recycled. A significant portion of the infrastructure in the United States is reaching the end of its useful life and will need to be replaced or rehabilitated; this could require far more cement than might be expected from economic forecasts of demand for cement.     

Have government regulations improved workplace safety? : A test of the asynchronous regulatory effects in China's coal industry, 1995-2006

Problem

Empirical studies on the effectiveness of workplace safety regulations are inconclusive. This study hypothesizes that the asynchronous effects of safety regulations occur because regulations need time to become effective. Safety regulations will work initially by reducing the most serious accidents, and later by improving overall safety performance.

Method

The hypothesis is tested by studying a provincial level aggregate panel dataset for China's coal industry using two different models with different sets of dependent variables: a fixed-effects model on mortality rate, which is defined as fatalities per 1,000 employees; and a negative binominal model on the annual number (frequency) of disastrous accidents.

Results

Safety regulations can reduce the frequency of disastrous accidents, but have not reduced mortality rate, which represents overall safety performance.

Discussion and summary

Policy recommendations are made, including shifting production from small to large mines through industrial consolidation, improving the safety performance of large mines, addressing consequences of decentralization, and facilitating the implementation of regulations through carrying on institutional actions and supporting legislation.

Impact on industry

Until recently, about 4,000 coal miners perished annually in China, demonstrating that workplace safety in China's coal industry is an urgent and important issue. This research provides evidence that safety regulations have asynchronous effects and identifies the priorities in improving safety in China's current coal mining. This may assist the Chinese government to design more effective safety improvement policies and improve the effectiveness of safety regulations and safety performance.     

The effect of aviation safety education on passenger cabin safety awareness

This paper examines the effect of aviation safety education on passenger cabin safety awareness in knowledge, attitude, and behavior (KAB). The educational value of KAB has been addressed in various fields such as AIDS prevention and campus safety. KAB has been applied in aviation safety related areas, especially in training, such as crew resource management training, pilot training, and mechanic training. However, KAB has not been implemented in aviation passenger education in cabin safety. This paper uses the construct of “aviation safety education”, which is intended to influence airline passenger knowledge of, attitude toward, and behavior about cabin safety awareness. Passenger surveys were done at two Taiwan airports. The results show that aviation safety education positively affects airline passenger cabin safety knowledge, attitude, and behavior. We recommend safety education that involves accurate instruction about emergency equipment procedures, situational awareness, emergency responses, and relevant cabin-safety regulations.Our findings indicated that an increase in cabin safety knowledge positively affected airline passenger behavior, which supported knowledge–behavior consistency. We also found that a positive attitude toward cabin safety positively affected airline passenger behavior, which supported attitude–behavior consistency. The hypothesis that cabin safety knowledge positively affected passenger attitude – knowledge–attitude consistency was not supported.     

Modeling perceived collision risk in port water navigation

An increase in the likelihood of navigational collisions in port waters has put focus on the collision avoidance process in port traffic safety. The most widely used on-board collision-avoidance system is the automatic radar plotting aid which is a passive warning system that triggers an alert based on the pilot’s pre-defined indicators of distance and time proximities at the closest point of approaches in encounters with nearby vessels. To better help pilot in decision making in close quarter situations, collision risk should be considered as a continuous monotonic function of the proximities and risk perception should be considered probabilistically. This paper derives an ordered probit regression model to study perceived collision risks. To illustrate the procedure, the risks perceived by Singapore port pilots were obtained to calibrate the regression model. The results demonstrate that a framework based on the probabilistic risk assessment model can be used to give a better understanding of collision risk and to define a more appropriate level of evasive actions.     

Pilot sample risk analysis for underground coal mine fires and explosions using MSHA citation data

After three decades of sustained continuous improvement of mine safety performances in the US, mine disasters in 2006 and 2007 compromised an excellent record and presented new challenges and vulnerabilities for the underground coal mining industry. In the aftermath of the incidents, formal investigations and new scrutiny of mine safety by the US Congress and expert study groups followed. The US Congress passed the Mine Improvement and New Emergency Response Act of 2006 (MINER Act), which mandated new laws to address the issues, including those related to mine fires and explosions from which miners must be protected. The National Mining Association-sponsored Mine Safety Technology and Training Commission report highlighted the role of risk analysis and management in identifying and controlling major hazards, such as fires and explosions. In this paper an approach is given for analyzing the risks for fires and explosions based on the Mine Safety and Health Administration citation database. Using 2006 citation data and focusing on subsystem failures, the methodology is applied to a database for a pilot sample of underground coal mines stratified by mine size and state.     

Process design optimization and risk analysis

Hazard identification and risk assessment are key aspects in process plant design. They are often applied in the final stages of the process at whatever the cost, unless financial constraints are imposed. However, a much better solution would be to introduce risk analysis earlier by including it in earlier stages of the design process, such as when the cost of a plant and the cost of any accidents that may occur are estimated. In this paper, an optimization methodology is proposed, in which both cost and risk (with a deterministic approach) are taken into account, to improve on the current situation. If a decision variable is chosen, an objective function will be established that makes it possible to analyze variations in overall costs, including the cost of the investment and the cost of accidents. This leads to an optimum situation in which costs are kept to a minimum. Of course, this optimization is subject to constraints, the greatest of which is the fact that risk must not exceed tolerated threshold levels. The procedure is explained and two examples, one involving a toxic release and the other a BLEVE/fireball, are used to illustrate it.     

人行横道危险时段的灰色聚类评价研究

人行横道是人车冲突的焦点地带,以行人违规率(RTI)为评价指标,采用灰色聚类的评价方法,对人行横道的安全状况进行分级评价,然后对单条人行横道的不同时间段的安全状况进行评价,找出危险时段.     

桥梁安全综合评价体系构建及重心法评价研究

目前桥梁安全综合评价研究并不成熟,在分析了桥梁安全综合评价应该考虑的主要因素的基础上,提出并确立了桥梁安全综合评价体系.探讨了应用模糊重心决策法进行桥梁安全综合评价的实现过程,为桥梁安全管理人员和安监部门理性决策提供理论依据.     

某公司食堂施工过程危险性分析及对策措施

我国大多建筑施工企业目前的安全管理只局限于对施工现场的检查和整改工作,而对施工现场的整体安全性缺乏分析和有效的监控,目前安全评价技术在建筑业的运用并不成熟.运用科学的安全评价方法,对建筑施工危险性进行系统分析和研究,可以补充、完善和指导施工现场的安全管理工作.