羟基乙叉二膦酸镀铜废液的处理及Cu~(2+)的高附加值资源化回收

采用Na BH4还原法将羟基乙叉二膦酸(HEDP)镀铜废液中的Cu~(2+)制备成纳米铜粉,并采用聚丙烯酰胺(PAM)对还原反应后的废液进行絮凝处理。研究了n(Cu~(2+))∶n(Na BH4)、还原反应温度、还原反应时间及PAM添加量对废液中剩余Cu~(2+)质量浓度的影响,并对回收的纳米铜粉进行了XRD和TEM表征。实验结果表明:当n(Cu~(2+))∶n(Na BH4)=4∶6、还原反应温度为50℃、还原反应时间为2 h时,废液中剩余Cu~(2+)质量浓度降低至1.1 mg/L,Cu~(2+)还原率达99.99%;可获得粒径为20~45 nm的近球型、高纯度、由多晶组成的纳米铜粉;当PAM添加量为10 mg/L时,废液中剩余Cu~(2+)质量浓度降至0.35 mg/L以下,达到GB 21900—2008《电镀污染物排放标准》(小于0.5 mg/L)的要求。     

臭氧氧化法降解聚氯乙烯离心母液废水中3种有机物

以聚氯乙烯离心母液废水中含量较高的3种有机物(聚乙烯醇、异辛醇和α-甲基苯乙烯)作为目标物,考察臭氧氧化工艺对3种有机物的去除效果,同时考察反应时间、臭氧投加量和初始pH对处理效果的影响。实验结果表明,臭氧氧化处理3种废水的最佳反应时间和臭氧投加量分别为:聚乙烯醇25 min,136 mg/L;异辛醇60min,312 mg/L;α-甲基苯乙烯60 min,32 mg/L。在此条件下,3种有机物的去除率分别为98%、85%和95%。此外,碱性条件有助于臭氧氧化工艺对3种有机物的降解。产物分析结果表明,经臭氧氧化,聚乙烯醇断链后进一步反应生成了草酸单乙酯,异辛醇和α-甲基苯乙烯分别生成了和苯乙酮。     

Future implications of urban intensification on residential water demand

Over recent decades Auckland, New Zealand, metropolitan area has vastly expanded as a result of rapid population growth and low-density housing developments. In order to manage the uncontrolled low-density urban sprawl, Auckland Council proposed a compact city model through promoting higher density housing developments. In order to understand the implications of this transition on future residential water demand, this study first evaluated water consumption in three major housing types in Auckland including single houses, low-rise and high-rise apartments. Using the geographic information system, the water consumption information, estimated from a large sample of 60,000 dwellings across Auckland, was subsequently integrated with the Proposed Auckland Unitary Plan outlining the future housing composition over different areas in Auckland. Through developing different growth scenarios, the study showed that the housing transition from single houses to more intensified multi-unit houses cannot considerably affect the average per capita water consumption in Auckland.     

1961~2015年西南地区降水及洪涝指数空间分布特征

利用西南地区98个气象站连续完整的日降水序列数据,整合降水强度、持续性指数及等级指数形成降水指数体系并研究该区域降水及洪涝指数的空间分布特征,得到以下主要结论：（1） 1961~2015年,西南地区年降水量（PRCPTOT）与极端降水量（R95PTOT）都呈现出“东多西少、南多北少”的分布形态;持续降水日数（CWD）则表现为“南高北低、西高东低”的分布格局。区域多年平 均PRCPTOT、R95PTOT、CWD分别以-13.12 mm/10 a、1.34 mm/10 a、-0.29 d/10 a的速率变化。（2）西南地区不同等级降水日数具有相似的空间分布特征,均呈现出“南高北低、东高西低”的分布形态。（3）西南地区洪涝强度指数呈由东北向西南递减的分布特征;降水总量越多的地区,洪涝强度反而越低,主要由于单站洪涝强度表征的是降水的波动情况,降水量越多波动越不明显。21世纪以来,该 地区洪涝等级以重级为主,2010年以来连续多年出现特重级洪涝。此外,洪涝强度越大,区域性年度灾害等级越高。该研究对于掌握西南地区极端气候变化规律,从而服务于防灾减灾具有一定的理论意义。     

Quantity and biochemical composition of sedimentary organic matter around offshore gas extraction platforms of the Adriatic Sea

Gas platforms can exert relevant effects on various ecosystem properties of the hosting area, modifying patterns of productivity and particle sedimentation. We hypothesised that the presence of gas platforms is associated with higher organic matter (OM) contents and we tested the null hypothesis by which benthic trophic conditions do not vary significantly among gas structures with different architectural characteristics. To test these hypotheses, we investigated sedimentary OM contents and biochemical composition at increasing distance from two distinct structures: one subsea well-site and one four-leg platform (FLP). We found that sediments surrounding the structures were characterised by similar OM contents, but different biochemical compositions, and that sedimentary OM compositional change with increasing distance from the structure is confirmed only at the FLP. These results suggest that: (i) benthic eutrophication is not consistent among different structures; (ii) OM biochemical composition changes are more evident than those in OM quantity; and (iii) the effect, wherever present, disappears at a very narrow distance from the platform. As biochemical composition of OM reflects food availability for benthic organisms, our results suggest that the enrichment of macrozoobenthic communities around these structures could be the consequence of increased nutritional quality of resources.     

农作物病虫害专业化防治服务对农药施用强度的影响

农药过量施用已造成严重的负外部性。推行农作物病虫害专业化统防统治服务可以实现安全、科学、合理用药,有效缓解农业面源污染问题和提升食品的质量安全水平。为了探究病虫害专业化统防统治服务在缓解农业面源污染方面的效果,文章利用全国七省水稻病虫害专业化防治服务调查数据,基于倾向得分匹配方法(PSM),剔除样本自选择内生性问题的影响,分析农户将水稻病虫害防治环节外包给植保专业化服务组织("统防统治")与"自防自治"户相比使用农药的种类和施用次数的差异,即植保专业化防治是否取得了较好的环境效应。研究结果表明,植保专业化服务显著减少了农药施用强度,提高了无公害低毒农药的采用比例;并且其效果在小农户和规模种植大户之间存在明显差异,与采纳病虫害统防统治服务的规模种植大户相比,小规模种植户在采纳病虫害统防统治服务后在降低农药施用强度,提高无公害低毒农药的应用比例方面效果更显著。基于此,文章建议强化对植保专业化防治项目的财政扶持力度,提高病虫害专业化防治覆盖率;重点鼓励小规模种植户采纳病虫害统防统治服务;鼓励农户土地流转,促进农业生产规模化经营,加强对种植专业户的病虫害防治方面的培训和引导,并着力发挥专业大户的示范带头作用,提高统防统治的效率,从而促进食品质量安全水平的提升和农业生态环境的保护。     

Accounting for monogastric livestock as a driver in global land use and cover change assessments

Land systems are described based on various characteristics, including land cover composition and agricultural production. However, it is uncertain to what extent livestock, particularly monogastric livestock, determines land systems. We included monogastrics in a land system classification, and statistically analyzed the land cover composition and agricultural production of otherwise similar land systems with and without monogastric livestock. The results indicate that land systems with monogastrics are statistically different from their counterparts in the classification without monogastrics in terms of grassland area and crop yields, but are less different in terms of tree area, crop area, and ruminant livestock production. We then used a land systems map that includes monogastrics in the classification and a similar map that does not include monogastrics to project future changes in a novel manner that integrates livestock as a determinant of land systems. The results show that including monogastrics in otherwise similar projections yields less cropland intensification and more cropland expansion in several world regions, including Northern Africa and the Middle East. Other regions, such as Europe and Australia, were characterized by less decrease or more increase in tree area in the application with monogastrics, mainly due to the occurrence of open forests with monogastrics. This study prompts a call for improved characterization of land systems for land use and cover change (LUCC) assessments in order to better represent LUCC driven by monogastric livestock.     

Techno-economic and environmental analysis of an integrated standalone hybrid solar hydrogen system to supply CCHP loads of a greenhouse in Iran

The techno-economic and environmental performance of hybrid solar hydrogen energy systems was investigated to provide combined cooling, heating and power (CCHP) demands of a standalone greenhouse in Iran to achieve sustainable agriculture based on an optimization procedure. From the environmental point of view, by deploying hybrid energy systems, 83%, to 100% of emissions can be avoided. Also a sensitivity analysis was performed on the hybrid energy systems in order to study the effect of major parameter variation on the systems justification. It was concluded that hybrid solar systems are economically competitive with conventional systems, for high solar intensity locations with high diesel fuel prices and decreased prices for PV and hydrogen storage technology.     

The implementation of a measurement system for brushless DC motor parameters

Most of the energy conversion in industrial devices and equipment is completed by the motor. The acquirement of motor parameters becomes very important for designing the motor drives. The aim of this paper is to design and implement a motor measurement system. Through the processing of an Advanced RISC Machines (ARM) microcontroller, the various parameters of motors such as input voltage, input current, input power, motor speed, and motor torque can be obtained. Consequently, the torque constant, load torque, viscous friction, and the inertia of the motor are calculated and achieved. The motor parameters can be commanded and displayed in the designed human interface of a PC via USB communication. The hardware system designed in this system includes an ARM microcontroller, an inverter, a voltage sensor, a current sensor, a torque sensor, and power supply. The software programming is developed under the Visual Studio 2012 environment development platform using the C language. Finally, the prototype of the motor measurement system is completed and verified. The experimental results for the motor parameters and torque/speed characteristic are demonstrated and show the feasibility of the complete designed system.     

Direct methanol fuel cell bubble removal mechanism using magnetic actuation

This article develops a direct methanol fuel cell (DMFC) with a magnet-actuated bubble removal mechanism. A micro-DC motor is used to control the bubble removal mechanism. The lower magnetic device is operated to extrude a Polydimethylsiloxane (PDMS) runner to compress the liquid fuel in the anode flow channel, forcing the CO₂ bubbles in the runner to flow toward the outlet end. The bubble retention in the anode flow channel is thereby improved, enhancing the cell performance. The proposed mechanism stability and performance and Polymethylmethacrylate (PMMA) runner are also discussed.