基于眼动试验的煤矿禁止类安全标识位置有效性研究

安全标识作为一种安全管理手段已得到普遍应用,但在煤炭企业实际应用中并未完全发挥其应有作用。为了研究煤矿禁止类安全标识放置的有效性,首先,通过构建眼动试验平台进行试验,选取煤矿井下皮带运输、井口等图片作为模拟场景;其次,将场景中安全标识区域作为兴趣区域,采集不同被试的注视点个数、首次进入时间等数据;最后,运用SPSS 20.0软件和统计方法分析试验采集的数据。结果表明,安全标识有效的设置位置为编号(2)(上中)和编号(5)(正中)。     

皮带巷粉尘浓度分布规律及全自动气水调节雾化除尘系统

鉴于传统的输煤皮带巷雾化除尘系统不能根据煤流高度自动调节雾化程度,难以达到预期除尘效果,以同忻煤矿输煤皮带巷为研究对象,基于COMSOL Multiphysics建立了输煤皮带巷煤流扬尘模型,研究了输煤皮带巷煤流高度对粉尘运移、分布的影响,继而设计了基于超声波物位传感器等多种传感器和V形调节电动球阀联动的气水调节雾化除尘系统。结果表明:在巷道高度1.5 m以上,煤流厚度越大,同一位置处的粉尘质量浓度越大,且以呼吸性粉尘为主,同时,在巷道走向沿程上,从风流入口处至下风向30~40 m范围内,粉尘质量浓度快速增长,污染严重;全自动气水调节雾化除尘系统可使呼尘质量浓度最高下降93.57%,具有良好的可行性和应用推广性。     

火焰引燃高速列车行李燃烧特性全尺寸试验研究

以CRH1高速列车20 kg旅客行李为研究对象,采用家具量热仪和全尺寸试验研究了不同引火源功率、不同通风量等条件下行李点燃特性、热释放速率、质量损失率、热释放总量、烟气释放速率等火灾参数,总结了其燃烧行为及特性。结果表明:高速列车20 kg旅客行李燃烧特性易受通风量、引火源功率等火场环境影响;引燃时间为1~2 min,持续燃烧时间在27~35 min;热释放速率可达347.3 k W以上,因行李压实较为紧密,燃烧不够充分,产生大量高温未完全燃烧气体,极大程度增加列车车厢回燃性;质量损失率较小,行李燃烧不充分;温升速率快,最高温度可达230℃;产烟量较大,透光率最低为35%;行李热释放总量THR随着引火源功率增加而增大,最高可达到213 MJ,控制引火源功率是减小行李热释放总量THR的关键。     

Pedestrian road crossing behavior (PEROB): Development and psychometric evaluation

Objective: The aim of this study was to develop a theory-based questionnaire to measure road crossing attitudes and potentially risky pedestrian behavior.

Methods: A cross-sectional validation study was carried out on a total sample of 380 young adults aged 18 to 25 years who live in Tehran, Iran. Data were collected from January 27 to May 20, 2015, using a self-administered structured pool of 76 items that was developed from research on the theory of planned behavior. A panel of subject-matter experts evaluated the items for content validity index and content validity ratio, and the questionnaire was pretested. Exploratory factor analysis (EFA) was performed to test construct validity. The Cronbach's alpha coefficient and intraclass correlation coefficient (ICC) analyses were done to assess internal consistency and stability of the scale.

Results: From the initial 76 items, 38 items were found to be appropriate for assessing the pedestrian road crossing behavior (PEROB) of young adults in Tehran. A 9-factor solution revealed an exploratory factor analysis that jointly accounted for 63.8% of the variance observed. Additional analyses also indicated acceptable results for the internal consistency with Cronbach's alpha value ranging from 0.67 to 0.88 and ICC values ranging from 0.64 to 0.96.

Conclusions: This psychometric evaluation of a self-administered instrument resulted in a reliable and valid instrument to assess young adult pedestrians' self-reported road crossing attitudes and behaviors in Tehran. Further development of the instrument is needed to assess its applicability to other road users, particularly older pedestrians.     

An observational study of child safety seat use in an international safe community: Tehran,Iran

Objective: Despite strong evidence of the effectiveness of child safety seats in reducing injuries, the use of these devices in some communities is still rare. The purpose of this study was to determine the prevalence of child safety seat use and the factors influencing its use in the safe community of Tehran.

Methods: This roadside observational study was conducted in 2015 and 2,178 personal cars with a child under 12 years aboard were observed on Tehran's streets in regard to use of child safety seats. Other variables such as the gender of the driver, driver's age group, type of street, region of municipality, time of day, and day of the week were also collected.

Results: Prevalence of child safety seat use was 4.3% and was significantly higher among women drivers, on freeways, and in municipal regions 1, 4, and 7.

Conclusions: The prevalence of child safety seat use in Tehran as a most populous member of the international safe community was very low and most children commuted in insecure situations in the vehicle. Therefore, it is proposed that plans should be made to increase the use of child safety seats in international safe communities.     

Teaching infant car seat installation via interactive visual presence: An experimental trial

Objective: A large portion of child restraint systems (car seats) are installed incorrectly, especially when first-time parents install infant car seats. Expert instruction greatly improves the accuracy of car seat installation but is labor intensive and difficult to obtain for many parents. This study was designed to evaluate the efficacy of 3 ways of communicating instructions for proper car seat installation: phone conversation; HelpLightning, a mobile application (app) that offers virtual interactive presence permitting both verbal and interactive (telestration) visual communication; and the manufacturer's user manual.

Methods: A sample of 39 young adults of child-bearing age who had no previous experience installing car seats were recruited and randomly assigned to install an infant car seat using guidance from one of those 3 communication sources.

Results: Both the phone and interactive app were more effective means to facilitate accurate car seat installation compared to the user manual. There was a trend for the app to offer superior communication compared to the phone, but that difference was not significant in most assessments. The phone and app groups also installed the car seat more efficiently and perceived the communication to be more effective and their installation to be more accurate than those in the user manual group.

Conclusions: Interactive communication may help parents install car seats more accurately than using the manufacturer's manual alone. This was an initial study with a modestly sized sample; if results are replicated in future research, there may be reason to consider centralized “call centers” that provide verbal and/or interactive visual instruction from remote locations to parents installing car seats, paralleling the model of centralized Poison Control centers in the United States.     

Effects of speed-control measures on the safety of unsignalized midblock street crossings in China

Objective: The primary objective of this study was to evaluate the effects of different speed-control measures on the safety of unsignalized midblock street crossings.

Methods: In China, it is quite difficult to obtain traffic crash and conflict data for pedestrians using such crossings, mainly due to the lack of traffic data management and organizational issues. In light of this, the proposed method did not rely on such data, but considered vehicle speed, which is a leading contributing factor of pedestrian safety at mid blocks. To evaluate the speed reduction effects at different locations, the research team utilized the following methods in this study: (1) testing speed differences—on the basis of the collected data, statistical analysis is conducted to test the speed differences between upstream and crosswalk, upstream and downstream, and downstream and crosswalk; and (2) mean distribution deviation—this value is calculated by taking the difference in cumulative speed distributions for the two different samples just mentioned. In order to better understand the variation of speed reduction effects at different distances from speed-control facilities, data were collected from six types of speed-control measures with a visual range of 60 m.

Results: The results showed that speed humps, transverse rumble strips, and speed bumps were effective in reducing vehicle speeds. Among them speed humps performed the best, with reductions of 21.1% and 20.0% from upstream location (25.01 km/h) and downstream location (24.66 km/h) to pedestrian crosswalk (19.73 km/h), respectively. By contrast, the speed reduction effects were minimal for stop and yield signs, flashing yellow lights, and crossings without treatment.

Conclusions: Consequently, in order to reduce vehicle speeds and improve pedestrian safety at mid blocks, several speed-control measures such as speed humps, speed bumps, and transverse rumble strips are recommended to be deployed in the vicinity of pedestrian crosswalks.     

The effect of precrash velocity reduction on occupant response using a human body finite element model

Objective: The objective of this study is to use a validated finite element model of the human body and a certified model of an anthropomorphic test dummy (ATD) to evaluate the effect of simulated precrash braking on driver kinematics, restraint loads, body loads, and computed injury criteria in 4 commonly injured body regions.

Methods: The Global Human Body Models Consortium (GHBMC) 50th percentile male occupant (M50-O) and the Humanetics Hybrid III 50th percentile models were gravity settled in the driver position of a generic interior equipped with an advanced 3-point belt and driver airbag. Fifteen simulations per model (30 total) were conducted, including 4 scenarios at 3 severity levels: median, severe, and the U.S. New Car Assessment Program (U.S.-NCAP) and 3 extra per model with high-intensity braking. The 4 scenarios were no precollision system (no PCS), forward collision warning (FCW), FCW with prebraking assist (FCW+PBA), and FCW and PBA with autonomous precrash braking (FCW + PBA + PB). The baseline ΔV was 17, 34, and 56.4 kph for median, severe, and U.S.-NCAP scenarios, respectively, and were based on crash reconstructions from NASS/CDS. Pulses were then developed based on the assumed precrash systems equipped. Restraint properties and the generic pulse used were based on literature.

Results: In median crash severity cases, little to no risk (<10% risk for Abbreviated injury Scale [AIS] 3+) was found for all injury measures for both models. In the severe set of cases, little to no risk for AIS 3+ injury was also found for all injury measures. In NCAP cases, highest risk was typically found with No PCS and lowest with FCW + PBA + PB. In the higher intensity braking cases (1.0–1.4 g), head injury criterion (HIC), brain injury criterion (BrIC), and chest deflection injury measures increased with increased braking intensity. All other measures for these cases tended to decrease. The ATD also predicted and trended similar to the human body models predictions for both the median, severe, and NCAP cases. Forward excursion for both models decreased across median, severe, and NCAP cases and diverged from each other in cases above 1.0 g of braking intensity.

Conclusions: The addition of precrash systems simulated through reduced precrash speeds caused reductions in some injury criteria, whereas others (chest deflection, HIC, and BrIC) increased due to a modified occupant position. The human model and ATD models trended similarly in nearly all cases with greater risk indicated in the human model. These results suggest the need for integrated safety systems that have restraints that optimize the occupant's position during precrash braking and prior to impact.     

在沸石对高放废液水泥固化体中Cs~+浸出率的影响

文章主要研究模拟高放废液加入沸石预处理经碱矿渣水泥固化后Cs+的浸出性能。实验结果表明,处理含Cs+高放废液固化体中加入沸石,能使Cs+浸出率降低";两步法"掺入沸石固化体抗Cs+浸出性能更有所提高;pH值升高Cs+的吸附比增大。