重庆市不同空间尺度建设用地演进特征与景观格局分析

研究不同空间尺度下城市土地利用的演变过程和变化特征,有助于深入了解和揭示城市土地利用演变时空差异和内在影响机制。以重庆市主城区为例,基于研究区1978~2013年多时序的MSS和Landsat TM/ETM+遥感影像数据,利用Arc GIS技术和景观格局分析理论,从研究区整体尺度、区域尺度和各区尺度等3种空间尺度对研究区建设用地演进特征和景观格局动态变化进行分析。结果表明:(1)1978~2013年研究区不同空间尺度建设用地面积变化趋势基本相似,综合扩展程度指数变化特征也存在一定的规律。在2001年之后研究区建设用地演进过程由低缓发展向高速递增阶段过渡,各区尺度建设用地扩展深受地貌、经济、政策、交通等影响因素的干扰;(2)在不同空间尺度新增斑块数目对比中,边缘扩展模式与跳跃扩展模式的主导优势先后发生3次转换,而在新增斑块面积比对比中边缘扩展模式始终保持绝对优势,填充扩展模式分别在新增斑块数目和面积比的比较中均处于弱势;(3)随着时间的变化,就整体尺度上景观指数变化而言,景观破碎度和景观多样性明显增加,斑块形状趋于简单和规则化,斑块之间连通性不断提高,与城市化进程趋于吻合。但区域尺度和各区尺度深受国家政策环境的影响,景观指数变化则相对复杂。研究结论有助于从空间尺度对城市扩展信息进行挖掘和理解,为其城市规划和土地管理提供一定的科学依据。     

N,N-二膦酰基甲基牛磺酸的制备与阻垢缓蚀性能

以牛磺酸、甲醛和三氯化磷为原料制备了N,N-二膦酰基甲基牛磺酸（BPMT）。探讨了原料配比、反应温度、反应时间对BPMT质量的影响,考察了BPMT的阻垢缓蚀性能,并与N,N-二膦酰基甲基氨基磺酸、N,N-二膦酰基甲基氨基甲磺酸、丙烯酸／2-丙烯酰胺-2-甲基丙磺酸、2-膦酸基-1,2,4-三羧基丁烷等进行了比较。实验结果表明,当n（牛磺酸）：n（三氯化磷）：n（甲醛）=1：2：4、反应温度110℃、反应时间2h时,BPMT的质量较好。BPMT的阻碳酸钙垢和稳定锌的性能优于其他阻垢剂,阻磷酸钙垢和分散氧化铁的性能仅次于丙烯酸／2-丙烯酰胺-2-甲基丙磺酸。当BPMT加入量为40mg／L时,缓蚀效果最好。     

A More Cost-Effective Emap Benthic Macrofaunal Sampling Protocol

Benthic macrofaunal sampling protocols in the U.S. Environmental Protection Agency's Environmental Monitoring and Assessment Program (EMAP) are to collect 30 to 50 random benthic macrofauna [defined as animals retained on a 0.5 mm (East and Gulf Coasts, USA) or a 1.0 mm mesh sieve (West Coast, USA)] samples per reporting unit using a 0.044 m² (East and Gulf Coasts) or 0.1 m² (West Coast) grab. Benthic macrofaunal community conditions in the reporting unit are characterized by cumulative distribution functions (CDFs) on end points of interest, such as number of species (S), abundance (A), and Shannon--Wiener diversity (H′). An EMAP and a companion field study were conducted concurrently in Tillamook Bay (Oregon, USA) to compare the cost effectiveness of benthic macrofauna samples collected using the EMAP West Coast (0.1 m² × ≥7 cm deep, 1.0 mm mesh), a 0.01 m² × 5 cm deep, 1.0 mm mesh, and a 0.01 m² × 5 cm deep, 0.5 mm mesh sampling protocol. Cost was estimated in relative laboratory sample-processing time. Sampling protocols were judged equally effective for EMAP purposes if, after linear transformation to adjust for scale changes in end point distributions, their S, A, and H′ CDFs were not significantly different. The 0.01 m² × 5 cm deep, 1.0 mm mesh sampling protocol was the most cost effective.     

Sampling Scale Effects in Random Fields and Implications for Environmental Monitoring

The concept of a sampling scale triplet of spacing, extent and support is used to define the spatial dimensions of a monitoring network or a field study. The spacing is the average distance between samples, the extent is the size of the domain sampled and the support is the averaging area of one sample. The aim of this paper is to examine what is the bias and the random error (uncertainty) introduced by the sampling scale triplet into estimates of the mean, the spatial variance and the integral scale of a variable in a landscape. The integral scale is a measure of the average distance over which a variable is correlated in space. A large number of two dimensional random fields are generated from which hypothetical samples, conforming to a certain sampling scale triplet, are drawn which in turn are used to estimate the sample mean, spatial variance and integral scale. The results indicate that the biases can be up to two orders of magnitude. The bias of the integral scale is positively related to the magnitude of any of the components of the scale triplet while the bias of the spatial variance is different for different components of the scale triplet. All sampling scale effects are relative to the underlying correlation length of the variable of interest which is closely related to the integral scale. The integral scale can hence be used for sampling design and data interpretation. Suggestions are given on how to adjust a monitoring network to the scales of the variables of interest and how to interpret sampling scale effects in environmental data.     

聚合氯化铁-腐殖酸(PFC-HA)冷冻干燥絮体的表面与孔分形研究

采用低温急速冷冻-真空干燥技术制备了PFC-HA絮体的粉末样品,研究了这些样品的物理与分形特征.结果表明,PFC-HA絮体具有晶体结构,SEM图象中有方块状形体;絮体主要组成元素为C、O、Fe,所含的特征官能团保留了絮体组成原料的一些特征;絮体的干燥样品的BET比表面积为51～92 m2·g-1,BJH累积吸附孔体积为0.0638～0.108 cm3·g-1,BJH脱附平均孔径为3.53～4.60nm,PSD峰值对应孔径3.9nm(4#样品还有另外一个PSD峰值53.2nm).PFC-HA絮体的干燥样品具有自相似性的粗糙表面,呈现多尺度分形特征;图象法确定的表面分形维数Ds值远低于N2吸附/脱附等温线法确定的结果,分别为2.14～2.22、2.90～2.96;前者的分形尺度大约处于23～390nm之间,主要属于絮体干燥样品的外表面尺度,后者的分形特征尺度区间的下限大约为0.2nm,属于孔表面尺度,因此,PFC-HA絮体干燥样品的表面粗糙度主要集中于孔表面.另外,对同一絮体,N2吸附法和脱附法确定的孔表面分形维数基本相同.通过热力学模型计算出的4#样品的Ds值接近于FHH理论计算出的结果,但分形尺度的区间变小了.     

Assessing alpine plant vulnerability to climate change: a modeling perspective

The potential ecological impact of ongoing climate change has been much discussed. High mountain ecosystems were identified early on as potentially very sensitive areas. Scenarios of upward species movement and vegetation shift are commonly discussed in the literature. Mountains being characteristically conic in shape, impact scenarios usually assume that a smaller surface area will be available as species move up. However, as the frequency distribution of additional physiographic factors (e.g., slope angle) changes with increasing elevation (e.g., with few gentle slopes available at higher elevation), species migrating upslope may encounter increasingly unsuitable conditions. As a result, many species could suffer severe reduction of their habitat surface, which could in turn affect patterns of biodiversity. In this paper, results from static plant distribution modeling are used to derive climate change impact scenarios in a high mountain environment. Models are adjusted with presence/absence of species. Environmental predictors used are: annual mean air temperature, slope, indices of topographic position, geology, rock cover, modeled permafrost and several indices of solar radiation and snow cover duration. Potential Habitat Distribution maps were drawn for 62 higher plant species, from which three separate climate change impact scenarios were derived. These scenarios show a great range of response, depending on the species and the degree of warming. Alpine species would be at greatest risk of local extinction, whereas species with a large elevation range would run the lowest risk. Limitations of the models and scenarios are further discussed. This revised version was published online in July 2006 with corrections to the Cover Date.     

省级尺度大气环境监测优化布点研究

以湖北省大气环境质量监测优化布点分析为例 ,对省级尺度的大气环境监测省控测点的选站原则、省控站位及数目的确定进行了研究探讨 ,提出了省级尺度大气环境监测优化布点的综合分析方法     

给水管网中铁释放现象的影响因素研究

在实验室静态试验下,定量分析了给水管网中无机化学水质参数对铁释放现象的影响,包括酸碱条件、氧化还原条件和无机离子等不同类别的水质参数.研究发现,铁释放速率都随着pH值、碱度和氧化剂浓度的升高而降低,随着氯离子浓度的升高而升高.根据管网的一般条件,提出了控制铁释放现象的理论临界释放速率计算公式.根据理论临界铁释放速率,达到控制管网铁释放现象的必要条件时,管网水质条件满足的要求为pH大于7.6,碱度大于150 mg/L,溶解氧浓度大于2 mg/L,氯离子浓度小于150 mg/L.     

颗粒物表面酸碱特性与孔表面分形的研究

通过电位滴定试验,证明了5种颗粒物的表面存在着一定量的OH-受体,其表面位浓度(Hs)在0.1219～0.3134 mmo.·L-1之间,表面位密度(DoH)在0.8586～2.1305个·nm-2之间,且不同采样点的颗粒物,其表面位浓度和表面位密度差别很大.所采集的5种颗粒物的孔结构接近平行板狭缝,孔尺寸分布不是均一的,平均孔径分布范围较宽(1.8～76nm);BET比表面积为9.5669～34.5605 m2·g-1,累积脱附孔体积为0.01729～0.06711 cm3·g-1,BJH脱附平均孔径为5.6768～7.7388nm,处于中孔范围,且平均孔径均大于其PSD峰值对应的孔径.通过分形FHH方程模拟N2吸附和脱附等温线数据计算出这些颗粒物的孔表面分形维数Ds比较接近(2.68～2.82之间),但它们的分形标度区间不同.另外,采用热力学模型和分形FHH理论计算出的表面分形维数的差异主要归因于这些样品孔尺寸分布的不均一性.     

无人机操作主观心理负荷测评与心率数据比较

为探究在无人机实操试验的心理负荷测量中主观量表与心率测评工具的性能,招募14名从未接触过无人机操作的被试者,在参加飞行操作培训后进行4种不同难度的无人机飞行操作情景试验;使用Polar V800监测被试者试验过程中的心率变化,并在试验结束后采用NASA-TLX,MCH,SWAT 3种主观量表进行评分,以比较飞行难度间各...