Simulation of Reflected and Scattered Laser Radiation for Designing Laser Shields

This paper presents a computer simulation of reflected and scattered laser radiation for calculating the angle of laser shields performed with the Laser Shield Solver computer program. The authors describe a method of calculating the shield angle for laser shields which protect workers against reflected and scattered laser radiation and which are made from different materials. The main assumptions of the program, which calculates and simulates reflected laser radiation from any material and which can be used for designing shield angles, are presented. Calculations are compared with measurements of reflected laser radiation. The results for one type of laser and different materials which interacted with a laser beam showed that the Laser Shield Solver was an appropriate tool for designing laser shields and its simulations of reflected laser radiation distribution have practical use.     

改性植被混凝土基材力学与植生试验研究

为探明羧甲基纤维素钠(CMC)与麦秸秆纤维对植被混凝土基材力学与植生性能的影响,通过直剪试验、植生试验研究了改性后植被混凝土基材(简称改性基材)的抗剪性能与黑麦草生长性能.结果 表明:①改性基材的剪切强度随CMC掺量的增加呈先增后减的变化趋势,0.5％CMC掺量时基材的剪切强度出现峰值,而随纤维掺量的增加改性基材剪切强...     

地铁站内空气幕防烟效果的数值模拟研究

地铁站内站台层发生火灾时,站台层的烟气会通过站台层到站厅层的楼扶梯蔓延至站厅层。为了研究楼扶梯口处设置空气幕对站台层烟气的阻挡效果,进行了数值模拟研究。主要研究空气幕的出口风速,出口射流角度对烟气的阻挡效果。设置的空气幕风速有3m/s,4m/s,5m/s,10m/s;设置的角度有0°,15°,30°。通过模拟对比空气幕前后温度变化,得出风幕风速为4m/s或者5m/s时即可较好阻挡烟气。角度为15°的空气幕比0°和30°的空气幕挡烟效果好。     

基于剪切梁理论的爆破扰动对巷道顶板稳定性影响研究

厚煤层沿底布置巷道顶板维护难度较大,从爆破扰动影响顶板稳定性的角度对此进行了研究.在分析爆破应力波远区破坏效应的基础上,建立了沿底布置巷道顶板的剪切梁模型,依此研究了顶板煤、岩体的水平位移及应力分布规律,最后以某矿地质条件为原型利用Flac3D数值软件进行了模拟研究.研究发现:基于爆破应力波的远区破坏效应,沿底布置巷道的顶板煤层与上覆岩层的相对错动可以用剪切梁理论加以分析.基于此得到了厚煤层巷道顶板中煤层与岩层单调加载过程及循环加载条件下的位移及应力分布,单次爆破对顶板的影响有限,多次扰动的累积效应会对其产生一定程度的损伤.模拟中,随着装药量的增加,沿底布置巷道顶板煤、岩体的水平位移随之增加,且煤体的位移量大于岩体;持续扰动条件下,煤、岩体的水平位移均出现了累加效应,且随着动力扰动作用次数的增加,煤、岩体的相对错动逐渐增大,容易产生顶板离层垮落等动力灾害.研究成果对加强扰动作用下顶板的支护管理具有一定的理论与指导意义.     

EMC用V型人工电源网络的解析

本文分别对理想和实用的V型人工电源网络的阻抗(模和相位角)、隔离度进行计算和分析,并将其与某公司生产的ENV216型人工电源网络的测试参数进行比较,验证了ENV216型人工电源网络是完全符合标准要求的,加深了对电源端传导发射测试的理解。     

跨音速风扇叶片高低转速下混合相积冰的对比研究

目的 获得跨音速风扇转子叶片高、低转速下混合相积冰的影响规律。方法 使用CFX获取风扇叶片空气流场数据,采用FENSAP-ICE获取积冰冰形,通过过冷水滴与冰晶温度、撞击叶片角度等进行混合相积冰高、低转速冰形分析。结果 风扇叶片高、低转速运转时,过冷水滴与冰晶的运动状态变化相对明显。高转速时,流场内的气流为跨音速流动,过冷水滴与冰晶撞击角度相差较大,撞击角度较大的叶根区域更容易收集过冷水滴与冰晶;低转速时,过冷水滴和冰晶与叶片的撞击角度大部分区域低于10°,使过冷水滴与冰晶碰撞到叶片后的捕获难度提升。风扇叶片高、低转速运转时,叶身的温度差异使过冷水滴在低转速下易直接凝结,未凝结的水膜量极少,而冰晶表面未形成水膜,不易被捕获,使得最终的积冰主要为过冷水滴积冰。结论 风扇叶片混合相积冰在高转速时,流道内温度升高更快,水膜不易凝结,冰晶表面易融化,促进了冰晶积冰。     

含裂隙岩石裂纹扩展与剪切特性的数值研究*

为研究直剪条件下含交叉裂隙岩石的裂纹扩展模式和剪切特性,基于PFC2D研究直剪条件下含裂隙岩石的裂纹扩展模式和剪切特性。研究结果表明:直剪过程可分4个阶段:Ⅰ初始平静阶段、Ⅱ裂纹单一扩展阶段、Ⅲ裂纹复杂扩展阶段、Ⅳ破坏阶段;法向应力越大,Ⅱ,Ⅲ阶段的裂纹扩展程度受到抑制;岩石中含单裂隙时,随裂隙角度α的增加,抗剪强度的变化趋势基本一致,遵循先降后增的规律;含交叉裂隙时,当主裂隙角度α=120°,150°时,抗剪强度随次裂隙角度β的增加呈先减小后增大的趋势,抗剪强度最小值均出现在β=30°;加固含裂隙岩体时,预防裂隙或者潜在破坏面两侧的岩体产生位移差,使其加固后成为1个稳固整体,是避免岩体产生裂纹导致破坏的重要手段。     

倾角和循环流量对平板型光催化反应器性能的影响

考察了平板倾角和循环流量对平板反应器流动特性和性能的影响 ,并讨论了以太阳光为辐射光源时平板型反应器的最佳倾角问题 .研究表明 ,平板上液体体积 (V)和水膜厚度 (b)与倾角 (β)、循环流量 (Q)分别存在定量关系 .入射辐射条件相同时 ,在悬浮催化剂体系中 ,平板倾角越小 ,循环流量越大 ,反应器性能越高 ;在固定催化剂体系中 ,平板反应器 (长 1m,宽 0.48m)的性能最佳时的循环流量为 500L/h、倾角为 10°,相应雷诺数为 286.无论在悬浮催化剂还是固定催化剂体系中 ,周期性地辐射能提高反应速率 .     

Experimental study of recirculating flows generated by lateral shock waves in very large channels

Due to the lack of data on hydraulic-jump dynamics in very large channels, the present paper describes the main characteristics of the velocity field and turbulence in a large rectangular channel with a width of 4 m. Although a hydraulic jump is always treated as a wave that is transversal to the channel wall, in the case of this study it has a trapezoidal front shape, first starting from a point at the sidewalls and then developing downstream in an oblique manner, finally giving rise to a trapezoidal shape. The oblique wave front may be regarded as a lateral shockwave that arises from a perturbation at a certain point of the lateral wall and travels obliquely toward the centreline of the channel. The experimental work was carried out at the Coastal Engineering Laboratory of the Water Engineering and Chemistry Department of the Technical University of Bari (Italy). In addition to the hydraulic jump formation, a large recirculating flow zone starts to develop from the separating point of the lateral shock wave and a separate boundary layer occurs. Intensive measurements of the streamwise and spanwise flow velocity components along one-half width of the channel were taken using a bidimensional Acoustic Doppler Velocimeter (ADV). The water surface elevation was obtained by means of an ultrasonic profiler. Velocity vectors, transversal velocity profiles, turbulence intensities and Reynolds shear stresses were all investigated. The experimental results of the separated boundary layer were compared with numerical predictions and related work presented in literature and showed good agreement. The transversal velocity profiles indicated the presence of adverse pressure gradient zones and the law of the wall appears to govern the region around the separated boundary layer.     

基于双高速摄影的着靶姿态测量方法

目的 获取物体在三维空间中的飞行着靶姿态.方法 提出一种基于2台高速相机双光轴交汇的测量方法,即利用2台相机同步拍摄,获得各自物体的姿态角度,根据相机光轴方位、相机与目标物体的空间位置关系,推导出物体着靶角的数学表达式,结合实际应用需求,获得几种特殊情形下的简化形式.结果 把该方法应用于跌落试验的实测分析,迅速且准确地...