Activated carbon coated palygorskite as adsorbent by activation and its adsorption for methylene blue

An activation process for developing the surface and porous structure of palygorskite/carbon(PG/C) nanocomposite using ZnC l2 as activating agent was investigated. The obtained activated PG/C was characterized by X-ray diffraction(XRD), Fourier transform infrared spectroscopy(FTIR), field-emission scanning electron microscopy(SEM), and Brunauer–Emmett–Teller analysis(BET) techniques. The effects of activation conditions were examined,including activation temperature and impregnation ratio. With increased temperature and impregnation ratio, the collapse of the palygorskite crystal structure was found to accelerate and the carbon coated on the surface underwent further carbonization. XRD and SEM data confirmed that the palygorskite structure was destroyed and the carbon structure was developed during activation. The presence of the characteristic absorption peaks of C_C and C–H vibrations in the FTIR spectra suggested the occurrence of aromatization. The BET surface area improved by more than 11-fold(1201 m2/g for activated PG/C vs. 106 m2/g for PG/C) after activation, and the material appeared to be mainly microporous. The maximum adsorption capacity of methylene blue onto the activated PG/C reached 351 mg/g. The activated PG/C demonstrated better compressive strength than activated carbon without palygorskite clay.     

Preparation of steel slag porous sound-absorbing material using coal powder as pore former

The aim of the study was to prepare a porous sound-absorbing material using steel slag and fly ash as the main raw material, with coal powder and sodium silicate used as a pore former and binder respectively. The influence of the experimental conditions such as the ratio of fly ash, sintering temperature, sintering time, and porosity regulation on the performance of the porous sound-absorbing material was investigated. The results showed that the specimens prepared by this method had high sound absorption performance and good mechanical properties, and the noise reduction coefficient and compressive strength could reach 0.50 and 6.5 MPa, respectively. The compressive strength increased when the dosage of fly ash and sintering temperature were raised. The noise reduction coefficient decreased with increasing ratio of fly ash and reducing pore former, and first increased and then decreased with the increase of sintering temperature and time. The optimum preparation conditions for the porous sound-absorbing material were a proportion of fly ash of 50% (wt.%), percentage of coal powder of 30% (wt.%), sintering temperature of 1130°C, and sintering time of 6.0 hr, which were determined by analyzing the properties of the sound-absorbing material.     

Strength and tightness evaluation method for pipe flange connections considering thermal effects

The pipe flange connection is widely applied in chemical, power plants, petrochemical, offshore oil and gas industries, and its strength and tightness are significant for the safe operation. However, there are still no practical and applicable strength and tightness evaluation methods for pipe flange connections working in dramatically varying temperatures. This paper proposed an approach to evaluate the pipeline's strength and sealing performance considering thermal effects in actual operating conditions by combining the experimental measurement and thermostructural analysis. The critical thermodynamic parameters are identified through measured temperature data in operating conditions, and then these parameters are used in the thermostructural analysis to obtain the actual temperature and stress fields. Then, the strength and tightness in complex temperature cases can be evaluated accurately. The pipe flange connection of a liquefied natural gas (LNG) fueling station is analyzed to verify the presented method's effectiveness. This method applies to evaluating the pipeline's strength and tightness and can predict the pipeline's performances under extreme temperatures using the tested data within the measurement range and the corresponding thermostructural analysis. Furthermore, the work in this paper also provides a reference for the design and analysis of pipe flange connections working in complex temperature conditions.     

高能重离子辐照下国产RPV钢A508-3的硬化行为

目的 研究在563 K的温度条件下,高能重离子辐照导致国产RPV钢A508-3的硬化行为。方法 使用回旋加速器提供的352.8 MeV Fe²¹⁺对A508-3钢试样进行辐照,使其依次达到0.15、0.30、1.50 dpa的损伤水平。借助辐照终端的梯度减能装置,在样品表面至25 μm的深度范围内产生一个准均匀分布的原子离位损伤坪区,并使用纳米压痕仪和维氏显微硬度计测量了试样的硬度。结果 考虑到压痕尺寸效应的影响,采用Nix-Gao模型对硬度数据进行拟合,由于高能Fe离子产生了较厚的损伤区,辐照试样中的软基效应明显减弱。辐照后的试样出现明显的硬化现象,且随着辐照剂量的增大,硬化增量有饱和趋势。通过辐照前和辐照至0.15 dpa试样的微硬度数据,得出其与纳米硬度之间的线性关系(Hv0=0.85 H0)。结论 借助A508-3辐照前后的硬度数据,计算发现试样的屈服强度增量与辐照剂量之间存在一种幂函数关系,这为A508-3钢中子-离子辐照硬化的映射关系研究提供了基础数据。     

变电站与输电线路的电磁环境影响水平分析与测试评估——以部分220kV及110kV输变电设施为例

通过对220kV及110kV户内布置、户外布置方式的变电站,架空输电线路以及地下电缆线的工频电场强度、工频磁场强度的监测,分析比较了变电站及输电线路对环境的贡献水平以及衰减规律。结果表明输变电设施对环境的贡献值非常有限,且随与之距离的增加而明显衰减。     

Echolocation call design and limits on prey size: a case study using the aerial-hawking bat Nyctalus leisleri

The echolocation calls used by Nyctalus leisleri during search phase in open air space are between 9 and 14 ms long, with the peak energy between 24 and 28 kHz. The pulses are shallowly frequency-modulated with or without an initial steep frequency-modulated component. The diet consists primarily of small flies (Diptera), including many chironomids (wingspan 9–12 mm) and yellow dung flies (Scatophaga; wingspan 24 mm), but also of some larger insects such as dung beetles (Coleoptera; Scarabaeoidea), caddis-flies (Trichoptera) and moths (Lepidoptera). The echo target strength of some prey items was measured. Contrary to models based on standard targets such as spheres or disks, the echo strength of real insects was found to be virtually independent of the emitted frequency within the 20–100 kHz frequency range. A model was used to calculate probable detection distances of the prey by the bat. Using narrow-band calls of 13.7 ± 2.7 ms duration, a bat would detect the two smallest size classes of insect at greatest range using calls of 20 kHz. The results may therefore explain why many species of large and medium sized aerial-hawking bats use low-frequency calls and still eat mostly relatively small insects. The data and model challenges the assumption that small prey are unavailable to bats using low-frequency calls.     

圆环巴西试验的抗拉强度建议公式

目的改进Hobbs公式得到的计算值普遍较大这一问题,提出圆环巴西试验的抗拉强度建议公式。方法对巴西试验圆环的应力解进行分析,并引用砂岩的试验数据验证。结果得到圆环巴西试验的抗拉强度建议公式,使用Hobbs公式得到的抗拉强度σTT比巴西圆盘试验σT大6倍以上,利用建议公式得到的抗拉强度σθ与巴西圆盘试验σT十分接近,误差不到1%。结论当圆环内外径比ρ在0.05到0.15的范围内时,该建议公式可很好地用来计算岩石类等脆性材料的抗拉强度。     

某场地边坡稳定分析方法的比较研究*

为了对边坡稳定性分析方法进行研究,以某场地高填方边坡和直立边坡为研究对象,基于Geostudio、理正软件以及ANSYS软件,采用M-P法、Bishop法和强度折减法进行边坡稳定分析。结果表明:高填方边坡安全系数为1.3,为稳定边坡;AB,BC,CD段地块间边坡边坡安全系数依次为0.479,0.410,0.381,基坑边坡安全系数为0.436,均为不稳定边坡;其中,M-P法得到的安全系数偏保守,Bishop法得到的安全系数结果较可靠,强度折减法得到的结果最为理想。研究结果可为边坡稳定性研究与治理提供借鉴。     

RBF神经网络可靠度分析方法在边坡稳定性研究中的应用

针对边坡稳定性可靠度分析,当状态函数无法显式表达且传统计算方法求解复杂问题困难时,提出一种基于ABAQUS和粒子群优化径向基函数神经网络的可靠度分析方法。基于ABAQUS的强度折减方法计算所选随机变量对应的安全系数,利用径向基函数神经网络的数据拟合功能,建立模型并映射出安全系数和随机变量之间的关系,构造响应面功能函数;利用蒙特卡罗生成的大量随机样本代入功能函数得到相应的安全系数,进而计算边坡的失稳概率和可靠度指标来反映边坡稳定性。研究结果表明:相对于传统方法,本文方法计算效率更高、误差更小,适合实际工程应用。     

基于不同强度等级混凝土的动力学特性研究

基于TAW-2000D电液伺服岩石三轴仪和直径75 mm的霍普金森压杆试验装置,得到了C25,C35和C45混凝土在静、动载荷作用下的应力-应变曲线,探讨了混凝土强度等级、动态峰值强度、峰值应变和应变率之间的变化规律。结果表明:混凝土准静态应力-应变曲线和动态应力-应变曲线在形态上存在明显差异,动态应力-应变曲线的峰值点随应变率的增大向右上方移动,线弹性阶段各曲线斜率变化不明显;动态峰值应力、动态弹性模量和峰值应变均存在不同程度的率相关性,并且混凝土材料的应变率敏感性随其强度等级的提高而增强;混凝土C45的各力学指标对应变率的敏感性最强,C35次之,C25的应变率敏感性最弱;推导了应变率与强度等级和冲击速率之间的经验公式,三者之间存在非线性变化规律。