陶瓷纤维滤管在烟气净化一体化技术中的应用

在对国内外现有的一体化烟气处理工艺系统梳理的基础上,重点分析了基于陶瓷纤维滤管的烟气净化一体化技术,对其技术原理、应用特性、应用现状进行了分析总结,并以江苏某垃圾焚烧发电厂中试示范项目为例进行验证.结果表明,NOx、SO2、HCl、颗粒物、二噁英类去除效率分别为97.6％、84.1％、74.8％、>99.9％、99.9...     

The interaction of heat shock proteins and some components of plant viruses北大核心CSCD

Considerable research has indicated that heat shock proteins (Hsp), as molecular chaperones, carry out many biological activities of plant viruses by folding, transporting, translocating, assembling, or degrading client proteins. It is fundamental to develop resistant plant varieties and novel anti-viral agents by determining the interaction mechanisms between plant viruses and hosts. In this study, we first reviewed the classification, gene and protein structure, and biological significances. We then analyzed the assembling mechanism of Hsp70 or Hsp90, plant host cofactors, and RNA-dependent RNA polymerases in a viral replicase complex, and the mechanism of interaction and subcellular localization between Hsp70 and some plant virus components. We highlighted the mechanism of interaction and movement between Hsp70 and some plant virus components and the effect of Hsp expression of plant hosts or viruses. The results indicated where the mechanism occurred, the participating factors, energy supply, and material conversion between Hsps and the plant virus components for the course of the intracellular movement, local movement between cells, and long-distance movement, and showed the Hsp type specificity and the law of dynamic Hsp expression in plant hosts infected by viruses. The studies mainly focused on the two Hsp factors and the plant viral components, indicating limited coordination mechanisms among many nucleic acids, proteins, and polysaccharides in macromolecular protein complexes (MRC). Future research should analyze the translocation mechanism between client proteins and Hsps, the coordination mechanism between Hsps and MRC components, and the relation between MRC and the plant tissue structure. © 2018 Science Press. All rights reserved.     

弯管与盲通管冲蚀磨损对比分析研究

为了研究石油管道流向急剧改变处的冲蚀磨损问题,采用DPM模型,通过改变入口流速、颗粒质量流速、颗粒直径,对90°弯管与盲通管的流场分布及冲蚀情况进行数值模拟。结果表明:弯管与盲通管最大冲蚀速率随入口流速的增大呈指数增长,随颗粒质量流速的增大呈线性增长;在50~100 μm粒径范围内,最大冲蚀速率随粒径的增加逐渐减小,在100~300 μm粒径范围内,随粒径的增加而增大;在入口流速、颗粒质量流速、颗粒直径相同的条件下,弯管最大冲蚀速率明显高于盲通管最大冲蚀速率,盲通管的耐蚀性更强;由于流体在盲通管产生涡旋现象,增加了颗粒能量的耗散,从而减小了进入下游管线颗粒的速率,使得颗粒更易积存于盲通段形成堆积层,减小了下游管段冲蚀速率。     

Small-scale physical explosions in shock tubes in comparison with condensed high explosive detonations

A series of small-scale experiments involving physical explosions in a 1.6 l pressure vessel was carried out. Explosions were initiated by spontaneous rupture of an aluminium membrane on one side of the vessel at a pressure in the range 1–1.2 MPa. The pressure waves released were measured at different distances along two separate shock tubes, one 10 m long and 200 mm in diameter (closed at one end by the high pressure vessel) and the other 15 m long and 100 mm in diameter.TNT equivalency was used for predicting the blast wave characteristics after vessel rupture. TNT equivalency was used because equations for prediction of peak pressure and impulse of the blast wave in 1-D geometry after detonations of condensed explosives are known. Some experiments with an equivalent amount of real explosive were carried out for comparison with the theoretical and experimental data obtained. The applicability of the TNT equivalency method presented for calculations of maximum pressure and shock wave impulse generated after rupture of the pressure vessel in 1-D geometry is discussed.     

电站锅炉水冷壁和过热器爆管分析

采用宏观形貌分析、化学成分分析、金相显微组织分析、材料力学性能测试、SEM微观形貌分析等手段,对某电站锅炉水冷壁管和过热器管破裂进行了分析。结果表明,热（硫）腐蚀导致的过热器管局部穿孔破裂,以及泄漏产生的高温水汽流对水冷壁管的,中刷磨损是爆管的主要原因,过热器管补焊点的再次泄漏是本次事故的直接原因。     

Experimental analysis of thermal performance of evacuated tube and flat-plate solar air collectors at different air flow rates

The thermal performances of an evacuated tube collector (ETC) and flat-plate solar air collector (FPC) are experimentally investigated at different air flow rates. To investigate the performance of the ETC and FPC, experimental set-ups were fabricated. Air was used as a working fluid and tested at the same climatic conditions. The ETC had 15 evacuated tubes with a surface area of 1.66 m². The experimental set-up consisted of a header with a hollow pipe (square pipe) in the centre through which the air flowed. The flat-plate collector had a surface area of 1.35 m². The FPC had a black painted absorber sheet which divides the collector into two sections. The air flowed through the upper and the lower sections parallel to the collector to minimize the overall heat loss. The temperature of the outlet air depends on several factors along with the airflow rate and the intensity of the solar radiation. It was found that during the day at high flow rates, the efficiency of the ETC varies from 0.12 to 0.5, and for the flat plate it was from 0.29 to 0.68. The maximum temperature of the air was 56.7°C for the ETC and 25.7°C for the FPC.     

爆炸形成过程中火焰加速的试验研究

为预防和控制工业爆炸事故,并为脉冲爆轰发动机的研究提供理论指导,分析火焰加速导致的燃烧转爆轰过程的影响因素。采用爆轰管探讨障碍物的阻塞比、混合物的组成、初始压力和点火能等4个因素对爆炸性气体火焰速度和爆轰压力的影响规律。试验结果表明:障碍物的存在能大大提高火焰速度和爆轰压力;爆轰压力随管内障碍物阻塞比的增大先变大后减小,并在阻塞比为0.498,燃料种类为天然气,化学当量比为1时达到最大;爆轰压力还随混合气体初始压力的增大和点火能的提高而增大。选择适宜的条件可大大提高火焰加速速率,促进燃烧向爆轰过程转变。     

Numerical simulation of propane detonation in medium and large scale geometries

A modelling strategy has been developed for consequence analysis of medium and large scale gaseous detonation. The model is based on the solution of Euler equations with one-step chemistry. The Van Leer flux limited method which is a total variation diminishing scheme is used for shock capturing. Preliminary calculations were firstly conducted for small domains with fine grids which resolve the wave, relatively coarse grids which have less than 10 grids across the wave and coarse grids in which the minimum grid size is larger than the wave thickness to ensure that the reaction scheme has been properly tuned to capture the correct detonation pressure, temperature and velocity in the resolutions used in the different cases. The model was firstly tested against a medium scale detonation test in a shock tube with U-bends. Reasonably good agreement is achieved on detonation pressure and mean shock wave velocities at different measuring segments of the tube. Following the validation, the detonation of a hypothetical planar propane-air cloud is simulated. The predictions uncovered some interesting features of such large scale detonation phenomena which are of significance in the safety context, especially for accidental investigations. The findings from the present analysis are in line with the forensic evidence on damages in some historic accidents and challenges previous analysis of a major accident in which forensic evidence suggested localised detonation but was considered as the consequence of fire storms by the investigation team.     

毛细管柱气相色谱法测定环境空气中1,2-二氯乙烷

采用毛细管柱气相色谱法测定环境空气中的1,2-二氯乙烷,用活性碳吸附,二硫化碳解析,FID检测器分析.方法在0 mg/L～311mg/L范围内线性良好,当采样体积为20 L时,最低检出质量浓度为0.006 mg/m3,标准溶液平行测定的RSD≤2.2%,加标回收率为98.4%～101%.     

热休克、Poly I:C上调草鱼GRP78基因表达

葡萄糖调节蛋白78(GRP78)是细胞内一种应急蛋白,它通过对细胞内、外胁迫因子产生强烈的应答而调节内质网稳态.草鱼(Ctenopharyngodon idellus)GRP78克隆于草鱼肝肾cDNA文库,全长2 490 bp.其中,5'非编码区为155 bp,含有7个热休克元件,3'非编码区为373 bp,最大开放阅读框为1 962 bp,编码653个氨基酸.序列分析表明,草鱼GRP78的N端包含3个HSP70家族的签名序列,C末端为内质网蛋白滞留信号KDEL,草鱼GRP78与人及其它动物的同源性很高.适应性进化分析也显示GRP78非常保守,受到强烈的功能约束,说明该蛋白质在进化中非常重要.RT-PCR分析表明,相对于本底水平,34℃热激和Poly I:c诱导后,草鱼GRP78在肝、肾等组织巾的表达明显上调.图4表1参16