Air Quality Monitoring and Management in Lisbon

The environmental decision-making process is related with the interpretation of data both in spatial and temporal dimensions. This paper presents a methodology that integrates the time-space framework of air quality data to infer the temporal pattern and spatial variability that could be interpreted for environmental decision purposes. Variograms that accommodate time and space lags were used for the analysis and proved to be effective. Its environmental meaning, in particular its relationship with traffic patterns is discussed. Data from air quality monitoring stations located in the central part of Lisbon were used in this study. It describes a strategy to identify the type of vehicles responsible for certain pollutant levels, particularly for nitrogen oxides, and discusses the application of new air quality European legislation to the city of Lisbon, Portugal.     

Injuries in Full-Scale Vehicle Side Impact Moving Deformable Barrier and Pole Tests Using Postmortem Human Subjects

Objective: To conduct near-side moving deformable barrier (MDB) and pole tests with postmortem human subjects (PMHS) in full-scale modern vehicles, document and score injuries, and examine the potential for angled chest loading in these tests to serve as a data set for dummy biofidelity evaluations and computational modeling.

Methods: Two PMHS (outboard left front and rear seat occupants) for MDB and one PMHS (outboard left front seat occupant) for pole tests were used. Both tests used sedan-type vehicles from same manufacturer with side airbags. Pretest x-ray and computed tomography (CT) images were obtained. Three-point belt-restrained surrogates were positioned in respective outboard seats. Accelerometers were secured to T1, T6, and T12 spines; sternum and pelvis; seat tracks; floor; center of gravity; and MDB. Load cells were used on the pole. Biomechanical data were gathered at 20 kHz. Outboard and inboard high-speed cameras were used for kinematics. X-rays and CT images were taken and autopsy was done following the test. The Abbreviated Injury Scale (AIS) 2005 scoring scheme was used to score injuries.

Results: MDB test: male (front seat) and female (rear seat) PMHS occupant demographics: 52 and 57 years, 177 and 166 cm stature, 78 and 65 kg total body mass. Demographics of the PMHS occupant in the pole test: male, 26 years, 179 cm stature, and 84 kg total body mass. Front seat PMHS in MDB test: 6 near-side rib fractures (AIS = 3): 160–265 mm vertically from suprasternal notch and 40–80 mm circumferentially from center of sternum. Left rear seat PMHS responded with multiple bilateral rib fractures: 9 on the near side and 5 on the contralateral side (AIS = 3). One rib fractured twice. On the near and contralateral sides, fractures were 30–210 and 20–105 mm vertically from the suprasternal notch and 90–200 and 55–135 mm circumferentially from the center of sternum. A fracture of the left intertrochanteric crest occurred (AIS = 3). Pole test PMHS had one near-side third rib fracture. Thoracic accelerations of the 2 occupants were different in the MDB test. Though both occupants sustained positive and negative x-accelerations to the sternum, peak magnitudes and relative changes were greater for the rear than the front seat occupant. Magnitudes of the thoracic and sternum accelerations were lower in the pole test.

Conclusions: This is the first study to use PMHS occupants in MDB and pole tests in the same recent model year vehicles with side airbag and head curtain restraints. Injuries to the unilateral thorax for the front seat PMHS in contrast to the bilateral thorax and hip for the rear seat occupant in the MDB test indicate the effects of impact on the seating location and restraint system. Posterolateral locations of fractures to the front seat PMHS are attributed to constrained kinematics of occupant interaction with torso side airbag restraint system. Angled loading to the rear seat occupant from coupled sagittal and coronal accelerations of the sternum representing anterior thorax loading contributed to bilateral fractures. Inward bending initiated by the distal femur complex resulting in adduction of ipsilateral lower extremity resulted in intertrochanteric fracture to the rear seat occupant. These results serve as a data set for evaluating the biofidelity of the WorldSID and federalized side impact dummies and assist in validating human body computational models, which are increasingly used in crashworthiness studies.     

基于气囊缓冲的某火箭炮着陆冲击分析

目的减小火箭弹着陆冲击加速度。方法基于LS-DYNA瞬态动力学分析软件和冲击动力学理论,采用有限元软件HYPERMESH建立火箭炮-气囊系统有限元模型,采用显式动力学方法对火箭炮-气囊系统的着陆冲击缓冲过程进行仿真。分析火箭炮在正常着陆工况下,火箭弹的着陆冲击响应,得出空投装备速度、加速度变化曲线,以及气囊的体积、压力曲线。结果在正常着陆工况下,火箭弹横向加速度的最大值为122 m/s2,小于安全的横向加速度;火箭弹纵向加速度的最大值为48.3 m/s2,小于安全的纵向加速度;火箭弹的最大轴向力为2640 N,小于安全闭锁力。结论在火箭炮着陆冲击过程中,气囊缓冲装置吸收了大部分冲击能量,起到了良好的缓冲作用,火箭弹的冲击加速度、闭锁力均在安全范围内。采用显式动力学方法对火箭炮的着陆冲击过程进行分析是可行的。     

沥青涂层对桩侧摩阻力影响的试验研究

采用改进直剪仪模拟桩与土之间的滑动摩擦,研究了沥青涂层对桩侧摩阻力的影响。试验结果表明,桩侧摩阻力与土的类型、法向应力有关,随着法向应力的增长,滑动摩阻力也相应增长,且增长近似呈线性关系;在一定的法向应力下,沥青涂层对减小滑动摩阻力有一定的作用,随着法向应力的增长,沥青涂层亦会导致滑动摩阻力增加。     

深井开采巷旁充填沿空留巷围岩活动规律研究

随着我国煤矿开采深度的逐年增加,瓦斯含量逐渐增大且赋存异常,回采工作面瓦斯超限问题严重威胁着煤矿的安全生产,而沿空留巷则是解决工作面瓦斯超限问题的最有效途径,但沿空留巷顶板稳定性控制问题则制约了沿空留巷技术在我国更广泛地推广应用。本文以顾桥矿1115(1)采煤工作面沿空留巷的成功案例为背景,全面研究分析了沿空留巷围岩活动的基本规律,对类似条件下的沿空留巷围岩控制具有重要的指导意义,使沿空留巷技术在我国得到更广泛的推广应用具有积极的现实意义。     

高瓦斯工作面隅角柔性气囊安全封堵研究

为解决高瓦斯工作面隅角封堵工人劳动强度大、效率低,封堵效果不佳易造成隅角瓦斯浓度超限等安全问题,研发设计了矿用阻燃内外胆组合结构的轻型柔性隅角封堵气囊,并相应提出了单体液压支柱配合轻型柔性气囊的隅角封堵新方法。通过实验室测试实验和现场工业性试验表明:选用PVC材料和双抗涂覆布材料的气囊质量小、轻便实用,大幅降低了工人的劳动强度,提高了工作效率,减小了传统封堵方式编织袋装碎煤造成的遗煤浪费;该气囊可适应大变形(变形率可达42.5%)、耐冲击(2×104J的冲击能量不破坏),抗撕扯能力强,且具有阻燃特性,重复使用率高,大大节约了隅角封堵的成本;使用气囊封堵后,采空区内瓦斯浓度显著增大,说明气囊封堵的密闭性增加,安全封堵效果十分明显。     

THOR dummy chest deflection response in oblique and lateral far-side sled tests

Abstract

Objective: The focus of this study is side impact. Though occupant injury assessment and protection in nearside impacts has received considerable attention and safety standards have been promulgated, field studies show that a majority of far-side occupant injuries are focused on the head and thorax. The 50th percentile male Test Device for Human Occupant Restraint (THOR) has been used in oblique and lateral far-side impact sled tests, and regional body accelerations and forces and moments recorded by load cells have been previously reported. The aim of this study is to evaluate the chestband-based deflection responses from these tests.

Methods: The 3-point belt–restrained 50th percentile male THOR dummy was seated upright in a buck consisting of a rigid flat seat, simulated center console, dashboard, far-side side door structure, and armrest. It was designed to conduct pure lateral and oblique impacts. The center console, dashboard, simulated door structure, and armrest were covered with energy-absorbing materials. A center-mounted airbag was mounted to the right side of the seat. Two 59-gage chestbands were routed on the circumference of the thorax, with the upper and lower chestbands at the level of the third and sixth ribs, respectively, following the rib geometry. Oblique and pure lateral far-side impact tests with and without airbags were conducted at 8.3 m/s. Maximum chest deflections were computed by processing temporal contours using custom software and 3 methods: Procedures paralleling human cadaver studies, using the actual anchor point location and actual alignment of the InfraRed Telescoping Rods for the Assessment of Chest Compression (IR-TRACC) in the dummy on each aspect—that is, right or left,—and using the same anchor location of the internal sensor but determining the location of the peak chest deflection on the contour confined to the aspect of the sensor; these were termed the SD, ID, and TD metrics, respectively.

Results: All deformation contours at the upper and lower thorax levels and associated peak deflections are given for all tests. Briefly, the ID metrics were the lowest in magnitude for both pure lateral and oblique modes, regardless of the presence or absence of an airbag. This was followed by the TD metric, and the SD metric produced the greatest deflections.

Conclusion: The chestbands provide a unique opportunity to compute peak deflections that parallel current IR-TRACC-type deflections and allow computation of peak deflections independent of the initial point of attachment to the rib. The differing locations of the peak deflection vectors along the rib contours for different test conditions suggest that a priori attachment is less effective. Further, varying magnitudes of the differences between ID and TD metrics underscore the difficulty in extrapolating ID outputs under different conditions: Pure lateral versus oblique, airbag presence, and thoracic levels. Deflection measurements should, therefore, not be limited to an instrument that can only track from a fixed point. For improved predictions, these results suggest the need to investigate alternative techniques, such as optical methods to improve chest deflection measurements for far-side occupant injury assessment and mitigation.     

电力需求侧管理与可持续发展战略

在探讨电力需求侧管理理论，方法以及电力经济结构和电力与环境问题的基础上，分析评价电力需求侧管理对可持续发展的作用贡献，电力需求侧管理是促进系统可持续发展的战备途径之一。     

长期侧流提取对EBPR系统除磷及其磷回收性能的影响

实验采用交替厌氧/好氧(An/O)运行模式的SBR反应器,考察310 d内分3个批次提取侧流比为0、1/4、1/3、1/2的厌氧放磷上清液后EBPR系统的脱氮除磷效果及相应的磷回收性能.结果表明,整个实验阶段系统对COD和氨氮的去除较为稳定,出水均能满足《城镇污水处理厂污染物综合排放标准》一级A标准,总氮去除因厌氧阶段反硝化不断增强有所提升,达标率由88.2%显著上升至98.6%.然而,随着厌氧上清液提取次数的增多,系统释磷能力整体下降,但前两个批次中系统除磷均稳定高效,去除率在90%以上,相应地出水磷达标率大于75%,仅第3批次实验中侧流比为1/2时系统除磷率出现大幅波动,最低降为54.2%,并贡献该批次出水磷不达标率的60%,说明长期提取1/2侧流比不利于主流工艺出水稳定维持.研究还发现,长期进行侧流磷回收实验有利于污泥减量,且对污泥沉降性能影响不大.因此,在EBPR系统内长期提取适当侧流比的厌氧上清液以进行磷回收与主流工艺同步高效脱氮除磷具有可行性.     

Computational investigation of the effects of knee airbag design on the interaction with occupant lower extremity in frontal and oblique impacts

Objective: The lower extremity of the occupant represents the most frequently injured body region in motor vehicle crashes. Knee airbags (KABs) have been implemented as a potential countermeasure to reduce lower extremity injuries. Despite the increasing prevalence of KABs in vehicles, the biomechanical interaction of the human lower extremity with the KAB has not been well characterized. This study uses computational models of the human body and KABs to explore how KAB design may influence the impact response of the occupant's lower extremities.

Methods: The analysis was conducted using a 50th percentile male occupant human body model with deployed KABs in a simplified vehicle interior. The 2 common KAB design types, bottom-deploy KAB (BKAB) and rear-deploy KAB (RKAB), were both included. A state-of-the-art airbag modeling technique, the corpuscular particle method, was adopted to represent the deployment dynamics of the unfolding airbags. Validation of the environment model was performed based on previously reported test results. The kinematic responses of the occupant lower extremities were compared under both KAB designs, 2 seating configurations (in-position and out-of-position), and 3 loading conditions (static, frontal, and oblique impacts). A linear statistical model was used to assess factor significance considering the impact responses of the occupant lower extremities.

Results: The presence of a KAB had a significant influence on the lower extremity kinematics compared to no KAB (P <.05) by providing early restraint and distributing contact force on the legs during airbag deployment. For in-position occupants, the KAB generally tended to decrease tibia loadings. The RKAB led to greater lateral motion of the legs compared to the BKAB, resulting in higher lateral displacement at the knee joint and abduction angle change (51.2 ± 21.7 mm and 15° ± 6.0°) over the dynamic loading conditions. Change in the seating position led to a significant difference in occupant kinematic and kinetic parameters (P <.05). For the out-of-position (forward-seated) occupant, the earlier contact between the lower extremity and the deploying KAB resulted in 28.4° ± 5.8° greater abduction, regardless of crash scenarios. Both KAB types reduced the axial force in the femur relative to no KAB. Overall, the out-of-position occupant sustained a raised axial force and bending moment of the tibia by 0.8 ± 0.2 kN and 21.1 ± 8.7 Nm regardless of restraint use.

Conclusions: The current study provided a preliminary computational examination on KAB designs based on a limited set of configurations in an idealized vehicle interior. Results suggested that the BKAB tended to provide more coverage and less leg abduction compared to the RKAB in oblique impact and/or the selected out-of-position scenario. An out-of-position occupant was associated with larger abduction and lower extremity loads over all occupant configurations. Further investigations are recommended to obtain a full understanding of the KAB performance in a more realistic vehicle environment.