管式反应器石灰雾液脱硫的数学模拟

建立的一维管式反应器雾液脱硫模型是对蒸发和吸收过程的耦合，以膜理论为基础的吸收机理同时考虑了含硫组分的离解、扩散、反应和固体颗粒的溶解。参数敏感性分析表明，对系统脱硫率影响最显的是出口干湿球温差，石灰颗粒粒度和入口ＳＯ２浓度、传质过程的分析表明，反应开始阶段液膜扩散和固体溶解阻力均存在，而气膜扩散在整个反应过程中都起着重要作用。     

Determination of polychlorinated biphenyl congeners in environmental samples

Ｄｅｔｅｒｍｉｎａｔｉｏｎｏｆｐｏｌｙｃｈｌｏｒｉｎａｔｅｄｂｉｐｈｅｎｙｌｃｏｎｇｅｎｅｒｓｉｎｅｎｖｉｒｏｎｍｅｎｔａｌｓａｍｐｌｅｓ￥ＣｈｕＳｈａｏｇａｎｇ；ＹａｎｇＣｈｕｎ；ＸｕＸｉａｏｂａｉ（ＲｅｓｅａｒｃｈＣｅｎｔｅｒｆｏｒＥｃｏ－Ｅｎｖ...     

气相色谱法测定二硫化碳和甲硫醚

利用气相色谱(配火焰光度检测器,采用3mxφ2mm玻璃填充柱分离)对CS2和甲硫醚(DMS)两种含硫化合物进行了分离检测。该方法具有较高的灵敏度和良好的线性关系。结果表明:该分析对含硫气体的最小检测浓度在mg/m3级,在柱温为70℃,检测器温度为180℃,气化室温度为150℃,氮气流速为50mL/min时,CS2的回收率为98.66%,变异系数为2.12%;甲硫醚的回收率为98.66%,变异系数为1.56%。     

脉冲电晕等离子体脱硫脱氮与除尘技术

脉冲电晕放电是产生等离子体的方法之一，目前已达到工业性试验阶段，该文对脉冲电晕等离子脱硫脱氮与除尘技术的形成过程进行了回顾，对其理论作了分析，并简介了工艺流程，还指出了目前存在的主要问题和需研究的关键技术。     

Developing Canada's National Forest Carbon Monitoring, Accounting and Reporting System to Meet the Reporting Requirements of the Kyoto Protocol

The rate of carbon accumulation in the atmosphere can be reduced by decreasing emissions from the burning of fossil fuels and by increasing the net uptake (or reducing the net loss) of carbon in terrestrial (and aquatic) ecosystems. The Kyoto Protocol addresses both the release and uptake of carbon. Canada is developing a National Forest Carbon Monitoring, Accounting and Reporting System in support of its international obligations to report greenhouse gas sources and sinks. This system employs forest-inventory data, growth and yield information, and statistics on natural disturbances, management actions and land-use change to estimate forest carbon stocks, changes in carbon stocks, and emissions of non-CO₂ greenhouse gases. A key component of the system is the Carbon Budget Model of the Canadian Forest Sector (CBM-CFS). The model is undergoing extensive revisions to enable analyses at four spatial scales (national, provincial, forest management unit and stand) and in annual time steps. The model and the supporting databases can be used to assess carbon-stock changes between 1990 and the present, and to predict future carbon-stock changes based on scenarios of future disturbance rates and management actions.     

浅谈原子吸收分光光度计在环境监测中的应用

本文介绍了原子吸收分光光度计在环境监测中的应用情况和重要性。分析了原子吸收光度法（包括石墨炉法）与ICP-AES（电感偶合等离子体发射光谱法），原子荧光法，极谱法在分析元素时各自的优缺点，又从目前环境监测的角度阐述了应用原子吸收分光度计的重要性与现实性。分析了原子吸收分光广度计在使用中的常见问题及原子吸收分光广度法分析中常出现的问题（从仪器、方法角度分别讲述）。并提出了原子吸收分光度计要进一步应适应环境监测的需求。     

测空气中SO2时的主要影响因素

目前测定空气中SO2主要采用甲醛吸收-副玫瑰苯胺分光光度法。该法操作比较严格，测试结果的准确度受诸多因素的影响。因此文中对这些影响因素进行了探讨，主要为试剂质量、显色温度和显色时间、溶液加入顺序、比色皿、空气采样器流量、采样温度、导气管的吸附等因素对测定结果的影响进行了探讨。     

回收利用废旧轮胎及其制度保障措施

对比分析了国内外废旧轮胎回收利用技术和现状，从法规、制度、管理、技术等方面分析了我国废旧轮胎资源综合利用产业发展中存在的主要问题，建议应尽快完善法律法规体系，建设具有法律保障的回收利用体系，促进废旧轮胎回收利用产业的可持续发展。     

普及EM技术促进水资源节约型社会的建设

EM具有较强的分解污染物质的能力，在净化河流、湖泊、近岸海域水质，处理有机废弃物，制作发酵有机肥料，创造资源再生循环利用的节约型社会，发挥了极大作用。     

Carbon Dioxide Balance of Wood Substitution: Comparing Concrete- and Wood-Framed Buildings

In this study a method is suggested to compare the net carbon dioxide (CO₂) emission from the construction of concrete- and wood-framed buildings. The method is then applied to two buildings in Sweden and Finland constructed with wood frames, compared with functionally equivalent buildings constructed with concrete frames. Carbon accounting includes: emissions due to fossil fuel use in the production of building materials; the replacement of fossil fuels by biomass residues from logging, wood processing, construction and demolition; carbon stock changes in forests and buildings; and cement process reactions. The results show that wood-framed construction requires less energy, and emits less CO₂ to the atmosphere, than concrete-framed construction. The lifecycle emission difference between the wood- and concrete-framed buildings ranges from 30 to 130 kg C per m² of floor area. Hence, a net reduction of CO₂ emission can be obtained by increasing the proportion of wood-based building materials, relative to concrete materials. The benefits would be greatest if the biomass residues resulting from the production of the wood building materials were fully used in energy supply systems. The carbon mitigation efficiency, expressed in terms of biomass used per unit of reduced carbon emission, is considerably better if the wood is used to replace concrete building material than if the wood is used directly as biofuel.