钙钛矿型催化剂La_（0.8）M_（0.2）CoO_3（M=Sr、Ce、Ba、Ca）催化燃烧VOCs的活性与抗硫性研究

用柠檬酸溶胶-凝胶法制备了La0.8M0.2CoO3（M=Sr、Ce、Ba、Ca）4种钙钛矿型复合氧化物催化剂.甲苯催化燃烧活性测试表明,4种催化剂均具有很好的催化活性,转化率达到90%时反应温度都在340℃以下,比LaCoO3下降20℃—70℃,催化性能依次为：La0.8Sr0.2CoO3〉La0.8Ce0.2CoO...     

钒基催化剂同步去除燃煤烟气中甲苯与NOx研究

采用不同工艺制备V₂O₅-WO₃-MoO_x/TiO₂堇青石整体式催化剂,以甲苯和NO为探针分子,考察了Mo的负载量、涂覆方法、粘结剂的种类等制备工艺对整体式催化剂性能的影响,用XRD、SEM-EDS、FT-IR、BET等技术对催化剂进行了表征分析.结果表明,采用涂敷法,以添加量为1%的甲基纤维素为粘结剂所制备的V1W6Mo3/TiO₂堇青石蜂窝陶瓷整体式催化剂具有最优活性和稳定性（T₉₀为307℃,负载率为28.26%,脱落率为6.81%）,在燃煤烟气中具有优异的同步去除VOCs与NO性能,甲苯去除率可达99%,NO去除率为100%,N₂选择性为99%.XRD、SEM-EDS表明V、W、Mo活性组分分布均匀且高度分散.FT-IR证明添加甲基纤维素的整体式催化剂具有优异的抗硫性能.     

Efficient degradation of Rhodamine B by magnetically recoverable Fe3O4-modified ternary CoFeCu-layered double hydroxides via activating peroxymonosulfate

Environment-friendly nano-catalysts capable of activating peroxymonosulfate (PMS) have received increasing attention recently. Nevertheless, traditional nano-catalysts are generally well dispersed and difficult to be separated from reaction system, so it is particularly important to develop nano-catalysts with both good catalytic activity and excellent recycling efficiency. In this work, magnetically recoverable Fe₃O₄-modified ternary CoFeCu-layered double hydroxides (Fe₃O₄/CoFeCu-LDHs) was prepared by a simple co-precipitation method and initially applied to activate PMS for the degradation of Rhodamine B (RhB). X-ray diffraction (XRD), fourier transform infrared spectrometer (FT-IR), scanning electron microscope (SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller method (BET), and vibrating sample magnetometer (VSM) were applied to characterize morphology, structure, specific surface area and magnetism. In addition, the effects of several key parameters were evaluated. The Fe₃O₄/CoFeCu-LDHs exhibited high catalytic activity, and RhB degradation efficiency could reach 100% within 20 min by adding 0.2 g/L of catalyst and 1 mmol/L of PMS into 50 mg/L of RhB solution under a wide pH condition (3.0-7.0). Notably, the Fe₃O₄/CoFeCu-LDHs showed good super-paramagnetism and excellent stability, which could be effectively and quickly recovered under magnetic condition, and the degradation efficiency after ten cycles could still maintain 98.95%. Both radicals quenching tests and electron spin resonance (ESR) identified both HO? and SO₄^?? were involved and SO₄^?? played a dominant role on the RhB degradation. Finally, the chemical states of the sample's surface elements were measured by X-ray photoelectron spectroscopy (XPS), and the possible activation mechanism in Fe₃O₄/CoFeCu-LDHs/PMS system was proposed according to comprehensive analysis.     

Semi-closed synthesis of nitrogen and oxygen Co-doped mesoporous carbon for selective aqueous oxidation

Heteroatom-doped meso/micro-porous carbon materials are conventionally produced by harsh carbonization under an inert atmosphere involving specific precursors, hard/soft templates, and heteroatom-containing agents. Herein, we report a facile synthesis of N and O co-doped meso/micro-porous carbon (NOMC) by template-free carbonization of a small-molecule precursor in a semi-closed system. The semi-closed carbonizaiton process yields hydrophilic NOMCs with large surface area in a high yield. The porous structure as well as the elemental composition of NOMCs can be modulated by changing the holding time at a particular temperature. NOMCs as metal-free heterogeneous catalysts can selectively oxidize benzyl alcohol and its derivatives into aldehydes/ketones with>85％conversion in aqueous solution, which is much higher than that of the control sample obtained in tube furnace (21％conversion), mainly due to their high N content, high percentage of pyridinic N, and large surface area. The presence of O-containing moieties also helps to improve the hydrophilicity and dispersion ability of catalysts and thus facilitates the mass transfer process during aqueous oxidation. The NOMC catalysts also dispayed excellent activity for a wide range of substrates with a selectivity of>99％.     

MnOx/TiO2催化剂催化燃烧去除废气中的正己烷

采用溶胶-凝胶法制备了MnOx/TiO2催化剂,考察了n(Mn):n(Ti)、催化剂载体、气体流量对催化燃烧去除废气中正己烷效果的影响.实验结果表明:随着n(Mn):n(Ti)的增加,正己烷去除率先增加后减小,气体流量减小正己烷去除率增大;当n (Mn):n(Ti)为7.85％、气体流量为100 mL/min时,在240℃时正己烷的去除率为90％,MnOx/TiO2催化活性最大;MnOx/TiO2的催化活性优于MnOx/SiO2;SEM和XRD表征结果表明,所制备的MnOx/TiO2是一种活性物种MnOx高度分散的纳米结构催化剂.     

LSH-02G克劳斯尾气加氢催化剂的开发及应用

介绍了LSH-02G克劳斯尾气加氢催化剂的生产工艺及工业应用情况。LSH-02G催化剂具有一定的大孔,可减少CO在催化剂孔道中的停留时间,显著提高催化剂的COS水解率。LSH-02G催化剂工业应用结果表明：装置在80％、100％和110％负荷下运行,各项参数运行正常,急冷水pH稳定在7.8~8.0,急冷塔顶在线氢气含量（φ）维持在1.8%~2.2%,加氢反应器无SO₂穿透。加氢反应器中SO₂加氢转化率均为100％,COS水解率均在92%以上,符合普光天然气净化厂加氢催化剂技术规格书要求（SO₂加氢转化率100％,COS水解率达90%以上）。     

废SCR催化剂中钒和钨的有机酸浸出

在对废SCR催化剂组成进行分析的基础上,采用草酸和酒石酸两种有机酸浸取废SCR催化剂中的V和W。实验结果表明：草酸对V、W的浸出率均大于酒石酸;在草酸浓度为1.00 mol/L、浸取温度为80 ℃、液固比为10 mL/g、浸取时间为180 min时,V和W的浸出率分别为63.50%和13.12%;在酒石酸浓度为0.5 mol/L、浸取温度为100 ℃、液固比为10 mL/g、浸取时间为180 min时,V和W的浸出率分别为44.00%和9.00%。酸性浸出未改变SCR催化剂中TiO₂的晶型,剩余残渣中依然保留着TiO₂骨架,可继续作为催化剂载体使用。     

废铜催化剂的综合利用

研究了以湿法回收利用废铜催化剂中的铜、锌制取氧化亚铜和氧化锌的原理以及最佳工艺条件。该工艺可同槽进行浸取、蒸氨、还原、中和水解等操作,生产成本低,产品质量好,工艺过程中无三废排放,具有很好的综合效益。     

Cracking styrene derivative polymers in decalin solvent with metal-supported carbon catalysts

The cracking of styrene derivative polymers dissolved in decalin was conducted with metal-supported carbon catalysts under an inert gas atmosphere to recover monosubstituted styrene or monosubstituted ethylbenzene in higher yields than is obtained by pyrolysis, and to elucidate the detailed reaction mechanisms in the solvent. Poly-(4-methylstyrene), poly-(4-t-butylstyrene), poly-(α-methylstyrene), and polystyrene were used. In decalin without a catalyst, each polymer was decomposed into the monomer, dimer, and trimer derived from the corresponding polymer except for poly-(α-methylstyrene), which was decomposed into the monomer and styrene. By using metal-supported carbon, the olefinic compounds derived from the corresponding polymer were thoroughly hydrogenated to the saturated form in a nitrogen atmosphere by a hydrogen transfer reaction from decalin, which was simultaneously dehydrogenated to tetralin and naphthalene with the evolution of hydrogen gas. In comparison with metal species, Pd- and Ru-supported carbon catalysts maintained the hydrogenation activity for a longer time and with a lower evolution of hydrogen than Pt or Rh. The dehydrogenation of decalin was mainly observed not on the metal surfaces, but on the carbon surfaces over Pd-supported carbon. Stabilization of the monomers will be able to suppress the coking which occurs with repolymerization in long running process. Received: July 19, 2000 / Accepted: March 16, 2001     

DS-Ⅰ催化剂脱硫脱氮技术的实验研究

以纯ＳＯ２及燃煤电厂烟气作实验气,利用积分法固定床ＣＦＢ方式进行了ＤＳ－Ⅰ型催化剂与活性炭催化性能的对比试验,对不同还进行了不同烟气温度、ＳＯ２浓度、湿度、烟气流速等工艺参数对ＤＳ-Ⅰ型催化剂催化性能的影响试验。对不同催化剂进行优化组合,可在除尘器后直接脱硫、脱氮,其脱硫率达８６％、脱氮率达６８％。催化剂经再生,可反复使用。