偏心双轴搅拌用于污泥搅拌混合的数值模拟

在大型污泥搅拌机中探索采用偏心双轴搅拌,使用Fluent软件对偏心双轴搅拌槽内污泥流体的流场变化进行数值模拟,并与中心双层搅拌进行比较,分析2种结构搅拌槽内宏观流场结构、速度分布及功耗特性,通过实验测量不同转速下偏心双轴的功耗,仿真计算结果和实验值吻合较好。结果表明：偏心双轴搅拌形成的流场结构打破了中心搅拌的流场对称性,有效的消除了隔离区。偏心双轴搅拌槽内流场各方向的速度分量均比中心双层搅拌有明显的提高,速度梯度较大,能够增大搅拌混合区,有利于污泥固液两相的混合。在N=5 r·s-1时偏心双轴搅拌的功耗约为中心双层搅拌的90.4%,具有明显的节能效果。     

Numerical simulation of far-field blast loads arising from large TNT equivalent explosives

Large TNT equivalent explosions usually arise from accidents occurring during the transportation, storage, and manufacturing of chemicals relevant to process industries. The blast wave generated by the explosion will spread and interact with the surrounding factories and storehouses, damaging the building structures within several kilometers and causing significant casualties and property losses. This study aims to develop an efficient numerical simulation method to predict blast loads to estimate the consequences of accidents involving far-field free air bursts or surface burst explosions. Before its interaction with the interested target, a blast wave is generated in the numerical model by specifying the initial and boundary conditions of the disturbed air. Based on empirical data of incident overpressure, an explicit formula to calculate the air particle velocity is derived from the governing equations of a perfect inviscid gas. A simplified path line method is proposed to calculate the air density. The proposed method is applied to the LS-DYNA CESE solver to simulate the blast loads on building structures in the far field. Validations against empirical data and experiments indicate that the proposed method is sufficiently accurate for engineering applications and, through a case study, presents a more efficient performance than the LOAD_BLAST_ENHANCED (LBE) and mapping methods.     

Experimental study on explosion inhibition by heptafluoropropane and its synergy with inert gas

The inhibition effect of heptafluoropropane (CF₃CHFCF₃) on methane explosions under different inhibitor concentrations in a closed vessel was studied. A high-speed camera and a pressure sensor were adopted respectively to record flame propagation characteristics and pressure data. Results indicate that the relationship between flame propagation and pressure rising was correlated. As the equivalent ratio (ϕ)≤1, the pressure presented a trend of rising firstly and then decreasing with increasing CF₃CHFCF₃ concentration, and it was found that there existed a critical concentration for pressure decrease. As ϕ > 1, the pressure exhibited a decreasing trend. Although the pressure appeared to seemingly increase, the moment that the pressure began to rise (t_rise) and the moment that the maximum explosion overpressure appeared (t_Pmax) were obviously delayed. The average rate of pressure rise ((dP/dt)_ave) was decreased as the concentration of CF3CHFCF3 increased. It indicates that CF₃CHFCF₃ can effectively reduce the explosion reaction rate. The critical concentration of CF₃CHFCF₃ for complete inhibition was determined. Meanwhile, the synergy of CF₃CHFCF₃-inert gas can improve the inhibition effect. Compared with CF₃CHFCF₃–N₂, the synergy of CF₃CHFCF₃–CO₂ presented a better inhibition effect, and the inhibition effect was increased with increasing inert gas concentration. And the mechanisms of physical and chemical effects on explosion inhibition were analyzed.     

三维叠前时间偏移技术在江苏WZD地区的应用

当地下地质构造复杂、断裂发育,横向速度变化不是太剧烈的情况下,提高偏移成像精度,三维叠前时间偏移是一种行之有效的方法。三维叠前时间偏移取得成功的关键:一是高保真、高信噪比的叠前数据;二是建立一个合理的三维偏移速度场。随着计算机性能的不断提高,三维叠前时间偏移逐渐成为常规处理技术,该技术在江苏油田WZD地区得到了广泛的应用,实际资料处理结果及钻探效果证实了三维叠前时间偏移技术是解决WZD地区复杂构造成像精度的一种好方法。     

电极配置和操作条件对静电油烟净化效率的影响

以有机气溶胶发生器产生的0.02～2.02μm癸二酸二辛酯颗粒模拟餐饮业排出的油烟PM2 5组分,利用静电低压撞击器颗粒物检测仪测定各粒径范围的颗粒个数和质量浓度,并系统研究了电极配置、电场风速和供电电压等因素对静电油烟净化效率的影响.结果表明:油烟荷电量以及荷电颗粒迁移距离是影响净化效率的关键因素,优化电极配置的增效...     

制粒及工艺优化对工程化阴燃治理含油污泥的影响

针对含油污泥含水率高、含油率高、渗透性差导致应用工程化阴燃处置技术的适应性差、处置能力低等问题,采用制粒手段强化含油污泥的预处理过程,并对其阴燃点燃及推进方式加以调整,旨在筛选出较优的预处理和阴燃工艺参数。通过小试实验探索了含水率对油泥制粒的影响,以及含水率、制粒状态、辅助燃料、阴燃启动方式和推进方向对阴燃的影响。结果表明,某含油废水治理产生的含油污泥可采用对辊挤出制粒的方式进行预处理,含水率宜控制在33%~35%;油泥经脱水或制粒均可增强阴燃稳健性;含水率较高时添加质量分数5%的稻壳,点燃耗时可缩短约40%,阴燃蔓延速度提升约70%;采用木炭间接启动阴燃也可显著缩短点燃耗时。本研究结果可为工程化阴燃治理油泥的工艺和设备设计提供参考。     

用于煤矿安全切割的前混合磨料射流加速机理研究

前混合磨料射流具有切割各种材料无火花、所需设备压力低以及操作简单等优点,具有广泛应用井下安全切割的功能。笔者根据建立的磨料粒子运动方程,推导出具有普遍意义的匀速流场内粒子路程函数以及用数值分析法求解出粒子在喷嘴内的速度;通过理论分析和具体的数值计算,磨料最主要的加速过程是在收缩段内完成,磨料粒子从喷嘴喷出时已能高达水流速度的95 %以上,磨料粒子在离开喷嘴在射流的核心段内仍将继续得到加速;同时发现,在条件允许的情况下,喷嘴的收缩段应适当长些,喷嘴圆柱段长度为喷嘴出口直径的2 .5～3.0倍最合适。     

横通道通风对隧道火灾烟气蔓延影响的数值模拟研究

为探究隧道横通道通风对隧道火灾烟气蔓延的影响规律,使用火灾动力学模拟软件FDS,对不同火源位置的横通道临界风速、主隧道温度分布以及烟气层高度进行研究。研究结果表明：在一定火源功率范围内,隧道横通道临界风速与火源功率的1/3次方成正比且火源距横通道越远,临界风速越小;当火源位于交叉口,横通道使用临界风速通风时,隧道内烟气温度明显降低,烟气迅速沉降到2 m以下;当火源距离交叉口10,20 m,横通道通风会加快火源下游烟气沉降,烟气沉降速度随横通道通风速率的增大而增大;当火源位于交叉口时,烟气沉降由横通道通风对烟气的降温作用和涡旋作用共同主导,当火源位于距离交叉口10,20 m时,烟气沉降主要由涡旋作用主导。     

基于GA-ELM浆体管道输送临界流速预测模型研究

针对浆体管道输送临界流速预测难度大、精确度低等技术难题,提出了基于极限学习机(ELM)的临界流速预测模型,用训练集对模型进行训练,以验证集预测值的均方误差作为适应度函数,利用遗传算法(GA)对ELM模型参数进行优化,应用优化得到的ELM模型对预测集进行预测。以某矿山为例,模型参数优化结果如下:隐含层节点数L为400,输入权值ai、偏置向量bi最优组合下预测结果适应度为0.0201。采用优化的ELM模型对预测集进行预测,预测结果的最大相对误差x=3.96%,平均相对误差y=1.58%,对比BP神经网络(x=12.95%)和SVM模型(x=3.19%),表明ELM模型更加精确、高效。     

水平燃料填充床反向阴燃传播及其熄灭分析

根据单步反应机理(仅包括燃料的氧化),建立了一维非稳态燃料填充床反向阴燃的数学模型。通过简化模型参数及大活化能渐近分析,得出了定性描述燃料反向阴燃传播的两个方程。结果表明:随着空气流量的增大,阴燃温度是不断上升的,但由于受到反向空气风流的影响,阴燃温度的增长幅度是逐渐变小的;阴燃传播速度却呈现出先增大后减小直至熄灭的变化趋势。这种变化趋势与前人的实验结果相一致。通过定性分析得出:在气体流量为零的情况下,燃料仍然可以发生阴燃,而维持阴燃不断传播所需要的氧气量源于反应区域周围气体的扩散。此外,也分析了燃料特性参数(如密度、孔隙率、比热、导热系数及活化能)对燃料阴燃温度和阴燃速度传播的影响。