应用高精度磁法测定灵武某煤田自燃区范围

煤层自燃后产生"热剩磁",基于这一理论,运用地面高精度磁测在灵武某煤田对煤田自燃区的边界范围进行圈定.由钻孔验证的结果来看,地面高精度磁测在圈定煤田自燃区边界范围时效果良好.     

煤矿井下自燃火灾的图像识别及综合判据系统

煤矿自燃火灾的早期探测及预报是保证煤炭生产安全的有效手段。目前已有的各种预测预报技术,虽对煤炭自燃火灾的防治起到一定的作用,但对于不同煤质和不同地质赋存情况下的煤矿,单一探测方法的预测精度有限,在探测的准确性和有效性方面尚不能完全满足各种类型煤矿安全生产的需要。为了提高煤炭自燃灾害早期探测的可靠性,笔者提出一种以图像识别技术为基础的煤炭自燃发火探测方法,并进一步利用信息融合技术结合其他探测方法建立一套煤矿自燃发火综合判据系统,该系统有助于提高煤炭自燃预测的准确性,对煤矿的安全生产能发挥重要作用。     

塑料和橡胶类废弃物的热物理特性及焚烧特性的研究

塑料和橡胶类的废弃物是城市垃圾的重要组成。本文在新式焚烧炉中对它们的焚烧特性、污染特性进行了研究。这将有助于进一步优化新型转式焚烧炉，完善低染、低腐蚀、低粘结的废弃物的焚烧工艺。     

高瓦斯煤层综放开采瓦斯与煤自燃综合治理研究

针对淮南潘三煤矿低透气性高瓦斯易自燃煤层综放开采的实际情况 ,笔者在综合分析影响综放面安全开采的瓦斯和煤自燃因素基础上 ,提出并实施了顶板走向长钻孔覆岩卸压瓦斯抽放、本煤层顺层孔卸压瓦斯抽放、尾巷抽放和排放等综合瓦斯治理措施 ,通过适时合理的工作面通风系统能位调整 ,合理配备工作面风量和控制采空区漏风量 ,解决了综放面回采时的瓦斯问题 ,有效控制了采空区煤炭自燃的发展 ,实现工作面的安全快速推进。实践证明 ,顶板走向长钻孔覆岩卸压瓦斯抽放是解决低透气煤层瓦斯抽放率低的有效方法 ,回采面的瓦斯抽放率在 30 %以上 ;尾抽和尾排是低透气性高瓦斯煤层安全生产的有效辅助措施 ,但其对工作面采空区煤炭自燃的“三带”有显著影响 ,影响的关键因素是通过采空区尾排及尾抽的混合流量。笔者提出的方法对类似条件的高瓦斯易自燃煤层综放安全开采有重要的指导意义。     

采空区自燃火灾气体钻孔导流的数值模拟研究

针对采空区局部自燃火源点的火灾情况 ,提出用地面钻孔抽放采空区自燃火灾气体 ,使其避免流向工作面的方法。基于渗流方程和气体扩散方程建立了简化的采空区火灾气体移动———弥散数值模型 ,用迎风有限元方法结合图形显示技术求解。模拟了在抽放前后采空区火灾气体移动和CO浓度分布特征 ,该方法对火源位置的判定精度要求不高 ,但钻孔必须设在火源的后方。通过模拟试验 ,抽放后工作面向采空区漏风增加量约为抽放流量的一半 ;抽放流量与采空区CO绝对涌出量近似呈负指数关系 ,给出了最低抽放流量的表达式。这项研究 ,能为分析在短期内消除采空区自燃火灾气体对工作面影响和确定抽放参数提供一种辅助手段。     

综采放顶煤工艺安全问题及其防治

综采放顶煤是一种高产、高效的采煤工艺，通过对煤矿现场的调研及有关资料的研究，对其所伴随的自燃发火、瓦斯和粉尘等的危害问题及其相应的防治措施进行了系统的分析与总结，可作现场安全技术管理工作的参考     

综放面风量调节范围与安全评价的数值模拟分析

结合实际算例 ,用迎风有限元方法 ,从理论上得出了采空区瓦斯绝对涌出量与工作面风量呈指数关系 ,采空区氧化带宽度与工作面风量呈负指数关系。按排放瓦斯要求和工作面生产的供风要求 ,确定风量下限 ,从防止采空区自然发火的角度 ,确定风量的上限 ,由此 ,得出合理的风量范围。引入了范围极差的概念 ,当风量极差越大 ,安全情况越好 ,反之 ,采空区的自然发火与瓦斯涌出二者是不可调和的 ,必须采取防治措施来提高风量极差值。     

Decision Support System for Managing Oil Spill Events

The Mediterranean environment is exposed to various hazards, including oil spills, forest fires, and floods, making the development of a decision support system (DSS) for emergency management an objective of utmost importance. The present work presents a complete DSS for managing marine pollution events caused by oil spills. The system provides all the necessary tools for early detection of oil-spills from satellite images, monitoring of their evolution, estimation of the accident consequences and provision of support to responsible Public Authorities during clean-up operations. The heart of the system is an image processing–geographic information system and other assistant individual software tools that perform oil spill evolution simulation and all other necessary numerical calculations as well as cartographic and reporting tasks related to a specific management of the oil spill event. The cartographic information is derived from the extant general maps representing detailed information concerning several regional environmental and land-cover characteristics as well as financial activities of the application area. Early notification of the authorities with up-to-date accurate information on the position and evolution of the oil spill, combined with the detailed coastal maps, is of paramount importance for emergency assessment and effective clean-up operations that would prevent environmental hazard. An application was developed for the Region of Crete, an area particularly vulnerable to oil spills due to its location, ecological characteristics, and local economic activities.     

Monitoring of fuel consumption and aromatics formation in a kerosene spray flame as characterized by fluorescence spectroscopy

The large presence of aromatic compounds in distillate fossil fuels should allow, in line of principle, to follow the fuel consumption and/or the presence of unburned fuel in a high temperature environment like a burner or the exhaust of combustion systems by exploiting the high fluorescence emission of aromatic fuel components. To this aim an UV-excited fluorescence source has to be used since the aromatic fuel components are strongly fluorescing in the UV region of the emission spectrum.

In this work UV-excited laser induced fluorescence (LIF) diagnostics was applied to spray flames of kerosene in order to follow the fuel consumption and the formation of aromatic species. A strong UV signal was detected in the spray region of the flame that presented a shape similar to that found in the LIF spectra preliminary measured on the cold spray and in the room-temperature fluorescence of fuel solutions.

The decrease of UV signal along the spray flame region was associated to the consumption of the fuel, but more difficult seems to be the attribution of a broad visible emission, that is present downstream of the flame.

The visible emission feature could be assigned to flame-formed PAH species contained in the high molecular weight species, hypothesizing that their fluorescence spectra are shifted toward the visible for effect of the high temperature flame environment.     

空气湿度对煤自燃特性影响的试验研究

为研究空气湿度对煤自燃特性的影响,运用程序升温试验台,在不同环境湿度条件下,对黄陵2号矿4#煤层煤样进行程序升温,分析不同温度下的气体成分,计算煤样在不同温度和湿度条件下的耗氧速率、CO和CO_2产生率,以及煤氧化的表观活化能。结果表明:与在干燥的空气中氧化相比,煤在加湿空气中的耗氧速率、CO和CO_2产生率升高,活化能降低,表明加湿有利于煤自燃;随空气湿度增加,煤体的耗氧速率、cO和CO_2产生率先升高后降低,活化能先降低后增加,表明存在一个最容易使煤氧化自燃的临界空气湿度;黄陵2号矿4#煤层煤样的临界相对湿度为25%左右。