Application of CGP-cross route process for microstructure refinement and mechanical properties improvement in steel sheets

A modified method of severe plastic deformation (SPD) entitled constrained groove pressing-cross route (CGP-CR) was introduced for imposing a high magnitude of equivalent strain of about 2.32 per pass on the sheet form samples. The major benefit of this improved route compared to previous common route was the more homogeneity of strain in the rolling (RD) and transverse (TD) directions of sheets. In this study, low carbon steel samples were used for examination of evolutions in microstructure and mechanical properties during SPD via CGP-CR process. Mechanical properties improvement were measured by tensile and macro hardness tests. The results indicate that CGP-CR process can effectively improve tensile strength; and also, yield stress and hardness of as-received low carbon steel samples were improved up to about 100% after two deformation passes. Also, high magnitude of inhomogeneity can be observed in hardness distribution through first pass of the process which diminishes in the subsequent passes. Microstructural evolutions during process were monitored by optical microscopy observations and X-ray diffraction analysis. The results demonstrate that initial ferritic microstructure with grain size of about 30 μm was refined to a 225 nm cell structure after two passes of CGP-CR process.     

添加H2O2加速低合金钢海水腐蚀的主要影响因素研究

采用极化曲线、旋转圆盘电极试验和失重（质量损失）法研究了低合金钢在添加了H。o：的海水中腐蚀加速的主要影响因素。结果发现低合金钢在添加H2O2的海水中腐蚀加速主要受到了H2O2浓度、温度、搅拌速度和H2O2添加周期的影响。研究表明,搅拌速度不变、H2O2添加周期相同的条件下,在H2O2浓度为0．8mol／L的70℃海水中,低合金铜的腐蚀加速最显著;在试验的转速范围内,加速作用随搅拌速度增大变得更为显著;H2O2加入后350min内加速作用较明显。     

浅析环保企业执行建造合同准则存在的问题及对策

随着国家对环境保护的重视,环保企业近年来迅速发展已成为一个新兴的朝阳产业,如何规范污水处理工程建设中建造合同的会计核算已成为每一个环保企业必须面对的问题。本文对环保企业在执行《企业会计准则第15号―建造合同》中存在的问题进行了细致的分析,并提出了一些解决对策,使环保企业执行建造合同准则能得以顺利实施。     

生态文明背景下昆明工业产业生态化发展路径探析

从生态文明发展视野对昆明工业产业的发展现状和推动工业产业生态化转型的动力构成进行分析。认为促进企业生态化生产观念形成,推进企业生产设备与生产技术生态化升级,促进工业产业集群化与生态化有机结合,推进传统工业园区向生态工业园升级,促进新能源工业产业优先发展是推动昆明产业生态化发展目标实现的重要路径。     

抗滑桩细观受力特征的数值模拟研究

抗滑桩是滑坡防治工程中一种非常有效的支挡措施,其受力特征直接关系到滑坡防治效果,因此开展抗滑桩细观受力特征的数值模拟研究具有重要的工程应用价值。基于有限元数值模拟方法,采用ANSYS软件中的分离式模型,以SOLID65单元和LINK8单元分别模拟钢筋混凝土抗滑桩中的混凝土和钢筋,研究了不同荷载作用下抗滑桩的细观受力特征。结果表明:在相同荷载作用下,抗滑桩在高度较小阶段,其高度与抗滑桩的变形呈非线性变化,随着抗滑桩高度的增加,其高度与抗滑桩的变形趋于线性关系;有限元数值模拟能较好地反映钢筋混凝土抗滑桩的细观受力特征。该研究可以为抗滑桩工程的设计提供借鉴与参考。     

废弃产品回收处理企业环境绩效评价初探

近年来,废弃产品回收处理行业日益受到政府和社会各界的关注,而回收处理企业是实施回收处理活动的主体,相关法律、法规的出台对回收处理企业提出了更高的要求。本文在概括梳理相关法律、法规的基础上,初步建立了废弃产品回收处理企业环境绩效评价指标体系,为回收处理企业采用先进的技术工艺、降低环境负荷、加强职业健康监护和企业环境管理提供参考,以适应国家政策要求和行业发展的需要。     

火灾下钢框架结构热-力耦合模拟与性能分析

基于"自然火灾安全概念"(NFSC)的基本思想,提出了火灾下钢结构热-力耦合模拟方法。利用ANSYS的参数化设计语言,建立了ANSYS软件与OZone火灾分析软件的数据接口,实现了火灾分析软件与大型有限元软件的耦合运用。基于火灾模拟软件OZone的分析结果,利用APDL语言,对钢框架结构进行了真实火灾场景下的热-力耦合模拟。研究表明:钢框架结构在真实火灾场景下,受非均匀变热流影响,结构内部将产生热应力梯度和应力牵移现象;同时钢框架中钢梁固接时,火灾初期变形较小,当达到某个关键时间点后将开始大的变形破坏,其主要原因是钢框架内部产生塑性铰,即钢梁由固接变为铰接,释放了对钢梁的约束。     

煤炭企业环境成本核算及控制浅议

随着我国环境保护方面的法律法规逐步完善,以及公众对环保的日益重视,对煤炭环境成本进行核算十分必要.本文论述了煤炭企业环境成本核算的重要性,分析了煤炭企业现有成本核算存在问题,提出了完善煤炭企业环境成本核算的对策.     

Effect of oxide-based fluxes on mechanical and metallurgical properties of Dissimilar Activating Flux Assisted-Tungsten Inert Gas Welds

Present investigation is to study the “Effect of Activating Fluxes on Mechanical and Metallurgical Properties of Dissimilar Activated Flux-Tungsten Inert Gas Welds”. Effect of current, welding speed, joint gap and electrode diameter on weld bead dimensions on 6 mm thick dissimilar weld between carbon steel to stainless steel, was studied under Activated Flux-Tungsten Inert Gas Welding process. During this investigation three different types of oxide powders were used-TiO₂, ZnO and MnO₂. After welding samples were subject to mechanical testing, in addition to characterization via micro hardness and microstructures of Normal Tungsten Inert Gas Welds and Activated Flux-Tungsten Inert Gas Welds. Activating fluxes TiO₂ and ZnO are effective fluxes for Activated Flux-Tungsten Inert Gas Welding of dissimilar weld between CS to SS. Highest depth/width (D/W) ratio reported under TiO₂ and ZnO fluxes compare to Normal-Tungsten Inert Gas Welds. Lowest angular distortion was observed under TiO₂ flux compare to Normal-Tungsten Inert Gas Welds. Mechanical properties, Joint Efficiency of Activated Flux-Tungsten Inert Gas Welds are higher than normal-Normal Tungsten Inert Gas Welds. Tensile Test specimens of both the processes failed from the parent metal (carbon steel side). Carbon migration from CS to SS, had occurred which led to failure of weld joints from CS side.     

Microstructure of 2205 duplex stainless steel joint in submerged arc welding by post weld heat treatment

The 2205 duplex stainless steel (DSS) is of both good properties austenitic steel and ferritic steel, which applies to the shipbuilding industry usually. In this paper, the OM, XRD and microhardness test methods are used to analyze the variation of submerged arc welded (SAW) joints with and without post weld heat treatment (PWHT). The research results show that the σ phase disappear in the fusion edge zone near heat affect zone (HAZ) and an increase in the welded center zone during the follow-up PWHT, while the amount of γ phase is decreased in the welded center zone with PWHT. A segregation distribution of some second phases is also found in the welded center zone after PWHT. There have two pick values of microhardness arise in the fusion edge zone and the welded center zone separately without PWHT. However, a maximum value of microhardness at the fusion edge zone near HAZ is disappeared and the other is still held at the welded center zone during PWHT. It can be attributed to the changes of second phases, element diffusions and particle segregation during PWHT. A developing mechanism is issued to demonstrate the second phases transferring of the 2205 DSS SAW joints by PWHT.