A material and energy flow model for co-production of heat and power

Co-production of electricity, district heat and industrial heat/process steam (heat and power, CHP) has been applied to a large, national scale, in only a few countries in the world, Denmark, The Netherlands and Finland. In this production method, the waste energy from electricity production is used in two quality levels. First, industrial process steam requirements can be met with this residual energy. Second, the waste energy is used in local district heating networks for households and other buildings in a city. In this integrated production method, a total fuel efficiency of 85% can be achieved. Through the technique of fluidized bed combustion, modern CHP plants can use coal and oil, and in addition, heterogeneous fuels such as biomass, industrial wastes and recycled fuels from households. In this paper, the CHP method is considered in terms of four categories of material and energy flows. For the purpose of considering the potential environmental gains and the difficulties of this production method when applied to integrated waste management and energy production, the four suggested categories are: matter (biomass) (1), nutrients (2), energy (3) and carbon (4). Corporate environmental management inventory tools, decision-making tools, management, organisational and administrative tools as well as information management tools that could be used in CHP-related material and energy flow management are shortly discussed. It is argued that for CHP energy and environmental management, it can be important to adopt an approach to networks of firms, rather than to an individual firm. The presented material and energy flow model may contribute to assessing, planning and implementing of CHP-based waste management and cleaner energy production.     

水蒸气法制备污泥质活性炭的实验研究

以污泥和木屑为原料,采用管式炉水蒸气活化法,对流化床热解炉制得的热解炭进行制备活性炭的研究,分析了活化因素对活化效果的影响、亚甲基蓝在活性炭上的吸附平衡和动力学、污泥活性炭浸出液中重金属的含量及其孔结构等性能.实验结果表明:随着活化温度的升高、活化时间的延长和水蒸气流量的增加,活性炭的得率不断降低,亚甲基蓝的吸附值先升高后降低;污泥中添加20%木屑时制得的活性炭的吸附性能是纯污泥质活性炭的一倍多; Langmuir吸附等温线模型、准二级反应模型能够比较准确地描述亚甲基蓝在污泥活性炭上的吸附相平衡及吸附过程,平衡时活性炭对亚甲基蓝单层最大吸附量为71.43mg/g;污泥质活性炭的孔结构以过渡孔为主;浸出液中只有少量的重金属.     

离子交换树脂再生水回用的实验研究

在油田稠油注蒸汽所需的离子交换树脂系统中,再生盐水仅能一次性使用,外排盐水会对水体、耕地和环境产生不良的影响。对离子交换树脂再生盐水回用工艺进行了实验研究。实验结果表明:当HJ-1与HJ-3、HJ-4、HJ-5联合使用时,再生盐水中镁离子的浓度可大幅度地降低。几种药剂对再生盐水中钙离子的去除作用效果各不相同,HJ-4对钙的处理效果明显优于HJ-3与HJ-5。现场实验表明:采用复配药剂处理含盐废水,可以实现含盐废水的回用。目前该处理工艺已在某些油田应用,取得了良好的运行效果。     

城市生活垃圾水蒸气催化热解的实验研究

采用自行设计的外热式催化热解实验装置,以城市生活垃圾为原料,对温度(600℃～900℃)、物料的组分、加热方式、水蒸气以及白云石催化剂等影响垃圾热解的因素进行了分析。结果表明,气化温度、水蒸气、催化剂对垃圾热解性能影相显著。随热解温度的升高,产气量不断上升,H2和CO的含量增加,当温度为900℃时,产气量达到0.96m3/kg,H2和CO含量分别达35.1%和31.8%;催化剂使用、水蒸汽通入显著改善产品气质量,特别是H2含量,可达45%左右;挥发分含量较高的物料热解性相对较好;快加热方式有利于提高产品气质量。     

煤炭气化常压高温蒸汽锅炉的测试与分析

以洗浴行业为例,通过对煤炭气化高温蒸汽锅炉的节能、环保及安全指标的测试与分析,表明这种新型的锅炉可以在常压下产生150℃的高温蒸汽,在燃烧未经洗选的散煤的情况下,其排放的SO2和烟尘都达到国家一级排放标准,锅炉平均热效率可达78.05%,比同类大烟煤锅炉节省约30%,比型煤锅炉节省约50%,比燃油锅炉、燃气锅炉、电锅炉节省60%以上。     

Dynamic simulation of a decentralized polygeneration plant providing SNG,steam and power

The behaviour of a decentralized polygeneration plant providing synthetic natural gas (SNG), steam and electrical power is simulated in three scenarios in this study. The plant size is based on an assumed capacity of decentralized polygeneration plants processing 1070 m³ h^?1 (STP) of syngas. 396 m³ h^?1 (STP) of raw SNG, 0.4 t h^?1 of steam at 5 bar and 670 kW of electrical power can be generated by the plant at the reference scenario. Methanation reactor and steam generator are modelled in detail. Further results indicate that such a polygeneration plant can provide positive and negative operation reserves for the electricity network to the extent of 100% of the reference power output, while the amount of generated steam varies by less than 40%. At the same time, the generated SNG quality keeps constant. Lower variations in the amount of generated steam are applicable when reducing the operation reserve capacity.     

火电厂(汽轮机部分)职业安全健康风险评价与控制研究

依据职业安全健康管理(OSHM)的要求,在危险辨识的基础上对火力发电厂(汽轮机部分)的危险源进行分类及其相互作用、影响的分析,建立了职业安全健康管理模式及其问卷,针对现场的运行、维修和试验部分进行了详细的调查。应用工业风险评价的定性及量化分析方法,通过现场调研和分析,对各种危险性事件发生的可能性及其后果的严重度进行评价,从安全管理和安全工程两方面提出对不可接受的危险源的预控措施。危险源的有效预测和控制,对火电厂职业安全健康水平的提高将发挥积极作用。     

热联合在塔西南化肥厂节能降耗的应用

通过优化塔西南化肥厂合成氨装置的蒸汽系统和电力工程部的锅炉运行模式,新增外购4.2MPa蒸汽用量,在实现快装锅炉停运的同时送出富余的1.6MPa蒸汽,达到能源梯级循环利用,从而为自身装置和厂际间共同实现节能降耗进行了有益探索,并取得可观的经济效益和社会效益。     

鱼体中硝基苯残留量测定方法的改进研究

为了监测自然水体中鱼体内硝基苯的残留量,对硝基苯的环境污染程度做出准确的评估,试验优化了鱼体中硝基苯残留量的测定方法.在比较索氏提取法和水蒸气蒸馏提取法的基础上,采用改进的水蒸气蒸馏提取法,结合苯反萃取,最后用气相色谱法检测,最终形成了改进后的鱼体中硝基苯残留量的检测方法.与索氏提取法和水蒸气蒸馏提取法相比,该方法所需时间短、有机溶剂消耗量少、操作简便、回收率高.在质量比3.0～500.0μg·kg~(-1)内线性关系良好,线性方程为Y=0.161 3X-0.527 8,r=0.999 9.方法检出限为3 μg·kg~(-1),加标同收率为75%～110%,相对标准偏差为3.64%～6.13%.结果证明该方法适用于鱼体中硝基苯残留量的检测.