弹药环境适应性设计需要考虑的几个问题

环境适应性是装备(产品)的重要质量特性之一.弹药是武器装备的重要组成部分,弹药的环境适应性好,其储存寿命就长,反之则短.弹药的环境适应性不但涉及加工制造,更主要的在于研制过程中的环境适应性设计.在研制过程中,弹药环境适应性设计不但需要考虑温度、湿度等主要的环境因素,还需要特别重视材料、涂镀层、部件的耐蚀、耐老化性能,材料间的相容性,包装的影响等问题.为了提高弹药环境适应性的设计水平,还需要开展弹药的自然环境试验和加速老化试验,研究弹药的环境适应性.建议开展弹药的环境试验、研究,切实提高弹药的环境适应性设计水平.     

典型铬渣简易掩埋场铬渣及土壤铬污染特征和处置分析

通过钻孔采样分析,研究了典型铬渣简易掩埋场地下铬渣及土壤铬中Cr6 、总Cr的分布特征和污染状况,结果表明,铬渣简易掩埋场铬污染程度严重,引起了周边和地下深部较大面积的土壤污染,深度达到了地下的基岩.铬含量在土壤层剖面中分布呈现规律性变化,即随土壤深度增加,Cr6 、总Cr含量逐渐下降,但绝大多数超过了危险废物毒性鉴别标准.从铬污染程度上看,总体上存在铬渣>土壤>人工填土.在此基础上,提出了铬渣及污染土壤的处置方式,为铬渣污染治理和资源化利用提供科学依据.     

黄浦江水系水质变化及原因分析

根据1986—2010年的水质监测数据,研究了黄浦江水系水质变化,并对影响水质的主要因素进行了探讨。结果表明,近25年的黄浦江水系水质变化基本可分为3个阶段:1986—1996年,上海市的畜牧业高速发展,生活污水量逐年上升,工业废水量较大而处理率低,水环境压力加大,水质持续恶化;1996—2002年,上游来水水质、生活污水量和畜牧业污染量均基本稳定,为水质改善创造必要条件,随着工业废水量的下降及废水处理能力的加强,水质持续改善;2002—2010年,上游来水水质在2002—2004年明显恶化,生活污水量再次进入快速上升期,加大了水环境改善的难度,水质改善趋势放缓并渐趋稳定。     

产业园区外存量工业用地环境准入管控研究—以上海市为例

为探索在新产业布局及发展形势下的产业园区外存量工业用地环境准入分类管控模式,采用空间叠图分析和承载力评估方法,基于“三线一单”分区管控要求对上海市产业园区外存量工业用地的空间布局约束、资源环境承载和环境风险防控进行评估。综合评估结果、新法规要求和规划方向的指引,梳理典型区环境准入管理的试点经验,提出以下建议：生态环境及产业、规划相关部门对产业园区外存量工业用地的现状及规划实施动态排摸;结合各地块资源环境特征、规划发展意向等因素,对不同规划导向的地块实施差异化分类管控;针对近中期保留的产业园区外存量工业用地,通过开展区域环评强化环境准入。

     

Mitigation of CO2 Emissions from the EU-15 Building Stock. Beyond the EU Directive on the Energy Performance of Buildings (9 pp)

-

Goal Scope and Background. The European Directive on Energy Performance of Buildings which came into force 16 December 2002 will be implemented in the legislation of Member States by 4 January 2006. In addition to the aim of improving the overall energy efficiency of new buildings, large existing buildings will become a target for improvement, as soon as they undergo significant renovation. The building sector is responsible for about 40% of Europe's total end energy consumption and hence this Directive is an important step for the European Union in order that it should reach the level of saving required by the Kyoto Agreement. In this the EU is committed to reduce CO2 emissions relative to the base year of 1990 by 8 per cent, by 2010. But what will be the impact of the new Directive, how large could be the impacts of extending the obligation for energy efficiency retrofitting towards smaller buildings? Can improvement of the insulation offset or reduce the growing energy consumption from the increasing installation of cooling installations? EURIMA, the European Insulation Manufacturers Association and EuroACE, the European Alliance of Companies for Energy Efficiency in Buildings, asked Ecofys to address these questions.

Methods

The effect of the EPB Directive on the emissions associated with the heating energy consumption of the total EU 15 building stock has been examined in a model calculation, using the Built Environment Analysis Model (BEAM), which was developed by Ecofys to investigate energy saving measures in the building stock. The great complexity of the EU-15 building stock had to be simplified by examining five standard buildings with eight insulation standards, which are assigned to building age and renovation status. Furthermore, three climatic regions (cold, moderate, warm) were distinguished for the calculation of the heating energy demand. This gave a basic 210 building types for which the heating energy demand and CO2 emissions from heating were calculated according to the principles of the European Norm EN 832.

Results and Discussion

The model calculations demonstrates that the main contributor to the total heating related CO2 emissions of 725 Mt/a from the EU building stock in 2002 is the residential sector (77%) while the remaining 23% originates from non-residential buildings. In the residential sector, single-family houses represent the largest group responsible for 60% of the total CO2 emissions equivalent to 435 Mt/a.

-

- The technical potential: If all retrofit measures in the scope of the Directive were realised immediately for the complete residential and non-residential building stock the overall CO2 emission savings would add up to 82 Mt/a. An additional saving potential compared to the Directive of 69 Mt/a would be created if the scope of the Directive was extended to cover retrofit measures in multi-family dwellings (200-1000m2) and non-residential buildings smaller than 1000m2 used floor space. In addition including the large group of single-family dwellings would lead to a potential for additional CO2 emission reductions compared to the Directive of 316 Mt/a.

-

- Temporal mobilization of the potential: Calculations based on the building stock as it develops over time with average retrofit rates demonstrated that regulations introduced following the EPB Directive result in a CO2 emissions decrease of 34 Mt/a by the year 2010 compared to the business as usual scenario. Extending the scope of the EPB Directive to all residential buildings (including single and multi-family dwellings), the CO2 emission savings potential over the 'business as usual' scenario could be doubled to 69 Mt/a in the year 2010. This creates an additional saving potential compared to the Directive of 36 Mt/a.

-

- Cooling demand: The analysis demonstrated that in warm climatic zones the cooling demand can be reduced drastically by a combination of lowering the internal heat loads and by improved insulation. With the reduction of the heat loads to a moderate level the cooling demand, e.g. of a terraced house located in Madrid, can be reduced by an additional 85% if the insulation level is improved appropriately.

Conclusions

This study demonstrates that the European Directive on Energy Performance of Buildings will have a significant impact on the CO2 emissions of the European building stock. The main saving potential lies in insulation of the existing building stock. Beyond this, CO2 emissions could, however, be greatly reduced if the scope of the Directive were to be extended to include retrofit of smaller buildings.

Recommendation and Perspective

The reductions should be seen in relation to the remaining gap of 190 Mt CO2 eq. per annum between the current emission levels of EU-15 and the target under the Kyoto-Protocol for the year 2010. The energy and industrial sector will probably contribute only a fraction of this reduction via the newly established EU emissions trading scheme and connected projects under the flexible mechanism. In addition, the traffic sector is likely to continue its growth path leading to a widening of the gap. Thus, there is likely to be considerable pressure on the EU building sector to contribute to the EU climate targets beyond what will be achieved by means of the current EPB Directive. Legislators on the EU and national level are therefore advised to take accelerated actions to tap the very significant emission reduction potentials available in the EU building stock.     

我国鲟鱼类资源及其保护与发展途径

鲟鱼类为北半球古老的大型经济鱼类，栖息于太平洋、大西洋和内陆水域，是世界著名的经济鱼类．近年来在有关科研项目的支持下，对我国境内的11种鲟鱼类资源进行了生物学、生态学等方面的一系列调查研究．本文着重论述了鲟鱼类的自然分布、经济与科研价值，分析了资源现状及其衰退原因，并提出今后资源保护与发展的8个途径．     

军工危险性建筑物外部安全距离美国和我国标准对比分析

针对军工危险性建筑物外部安全距离确定时药量覆盖不全面、新产品无依据、厂房用地与城市发展用地矛盾等问题,对美国标准和我国标准中安全距离的分类、确定原则、确定方法进行了对比分析,提出了对我国标准修订的建议,为我国军工危险性建筑物外部安全距离标准的制修订提供借鉴。     

Lead-Free Hunting Rifle Ammunition: Product Availability, Price, Effectiveness, and Role in Global Wildlife Conservation

Proposals to end the use of lead hunting ammunition because of the established risks of lead exposure to wildlife and humans are impeded by concerns about the availability, price, and effectiveness of substitutes. The product availability and retail prices of different calibers of lead-free bullets and center-fire rifle ammunition were assessed for ammunition sold in the USA and Europe. Lead-free bullets are made in 35 calibers and 51 rifle cartridge designations. Thirty-seven companies distribute internationally ammunition made with lead-free bullets. There is no major difference in the retail price of equivalent lead-free and lead-core ammunition for most popular calibers. Lead-free ammunition has set bench-mark standards for accuracy, lethality, and safety. Given the demonstrated wide product availability, comparable prices, and the effectiveness of high-quality lead-free ammunition, it is possible to phase out the use of lead hunting ammunition world-wide, based on progressive policy and enforceable legislation.     

On Characteristics of Production and Destruction Processes in Lowland and Mountain Tundras of the Extreme North

Parameters of the production and destruction processes in different types of tundras are compared. It is shown that there is a fairly high degree of correspondence between the structure of tundra communities and the ecotopes occupied by them. On the other hand, typologically similar lowland and mountain tundras markedly differ in the functional respect. The rate of decomposition processes is higher under environmental conditions of the mountain tundra belt.     

Century Perspective of Heavy Metal Use in Urban Areas. A Case Study in Stockholm

The inflow and stock (amount in use) of heavy metals (cadmium(Cd), chromium (Cr), copper (Cu), lead (Pb), mercury (Hg), nickel (Ni) and zinc (Zn)) in goods in 1995 have been quantifiedin the anthroposphere of Stockholm, Sweden. Statistics on national, regional and local level were used. Contacts were established with representatives from production and constructionin the industrial sector and with authorities. The results show that the stock of Cd is 0,2 kg per capita. For the other heavymetals the corresponding result per capita is: Cr 8, Cu 170, Hg 0,01, Ni 4, Pb 73 and Zn 40 kg. The inflow varies between2–8%of the stock indicating the importance of the stock. The lowestlevels are for Cu and Pb. Heavy metal levels in solid waste are high, between 15–45% of the amount in the inflow (Hg excluded), the lowest values were for Cu and Pb. Thus, recyclingis incomplete. Long life expectancy goods form the majority of the stock but there is a tendency that short life expectancy goods increase their importance in the inflow. Concealedgoods are also more frequent in inflow than in the stock.