锈蚀钢筋混凝土圆柱抗震性能的试验研究

对不同锈蚀程度的钢筋混凝土圆柱进行低周反复试验,研究了不同轴压比下的钢筋锈蚀率对钢筋混凝土圆柱滞回曲线、骨架曲线、刚度、延性及耗能能力的影响;给出了试件累积耗能、屈服荷栽、极限荷栽、荷栽最大值和位移延性系数与钢筋锈蚀率和轴压比的关系.研究表明,随着钢筋锈蚀率和轴压比的增大,试件的滞回曲线趋于干瘪,骨架曲线下降段变陡,试...     

拱形抗滑桩墙支护结构体系模型试验相似材料研制

根据模型试验相似比尺和桩土间应力协调要求,用机制砂、河砂、水泥、石粉等配置了40组(每组6个)低强度、低弹性模量的圆柱形微混凝土相似材料试件.测试结果表明:微混凝土具有和原型混凝土大致相同的应力应变阶段和破坏模式,可以模拟原型结构的力学行为和变形、破坏特征.砂率和石粉取代率不同时,微混凝土试件的轴压强度和弹性模量在较大...     

碎石土边坡破坏机理的敏感性分析

在碎石土类边坡中常常发育稳定的地下水管网排泄系统,它们对控制地下水水位上升,保持边坡稳定十分重要。以官家滑坡为例,通过对滑坡稳定性系数有关的各因素敏感性分析,发现地下水是影响边坡变形破坏以及复发破坏的最主要因素。当坡脚开挖或坡体堆载时,会破坏管道状地下水排泄系统,降雨入渗导致地下水水位升高,从而引起坡体内孔隙压力比、水头高度和水力坡度增大,使潜在滑面上的孔隙水压升高,影响碎石土边坡的稳定性;同时,地下水位的升高降低了土体的内摩擦角,而因素敏感性分析发现,内摩擦角对边坡失稳具有极其重要的影响。在官家滑坡的后期治理中,治水作为主要工程措施的理念已经得到很好的贯彻,效果十分明显。     

轨道交通运行引起的场地振动试验研究

轨道交通运行引起的环境振动问题,已成为土木工程界关注的一个新的课题。对南京市栖霞镇某场地进行了列车振动现场试验,得到了不同列车车型与车速下的地面振动速度时程曲线,给出了地面振动速度的频谱特性和衰减规律,分析了列车运行引起的环境振动的传递路径,为进一步研究轨道交通振动控制提供了参考。     

制浆造纸工业的恶臭污染评价及防治

以大量的实测数据为基础,探讨了制浆造纸工业所产生恶臭的源强计算方法,然后借用了澳大利亚臭气扩散模式对空气中的臭气质量浓度进行模拟,最后提出了臭气的污染防治措施.     

饱和层状尾砂动力特性研究

为探究动力作用下尾砂液化破坏特性,基于某矿山尾矿库坝体分层尾砂,开展不同固结应力和层状结构条件下动三轴试验,分析层状尾砂动弹性模量、阻尼比及动剪应力比等动力参数与动孔压的变化规律.结果表明:固结应力对层状尾砂力学特性和动孔压变化趋势有较大影响,固结应力越大,动孔压增长越明显,初始增长斜率随固结应力增大而下降;尾粉土厚度...     

FRP加固钢筋混凝土梁的抗剪计算方法

随着利用FRP加固混凝土结构研究的深入和应用的拓展,FRP加固钢筋混凝土梁抗剪性能的研究已取得了丰硕的成果。以往对抗剪承载力的分析大多是基于有效应变即对极限应变进行有效折减的方法,而最近的研究则引入了裂缝处FRP应变分布不均匀系数。在此基础上,本文综合考虑了FRP发挥的最大应变、沿裂缝应变分布的不均性以及斜裂缝倾角对有效应变的影响,提出了等效有效应变的概念,使计算趋于简单和清晰。本文收集了128根FRP全包裹的、以FRP断裂破坏为主的钢筋混凝土梁的抗剪实验数据,通过对主要影响因素的统计分析,建立了等效有效应变简单可靠的计算公式和基于FRP断裂的抗剪承载力设计方法。128根实验梁的抗剪计算结果表明,本文提出的方法简单可行,意义明确,且精度要比已有的建议公式稍高。     

植被混凝土无侧限抗压强度的室内试验初探

通过对植被混凝土室内试验结果的归纳和分析,研究了水泥掺入比、龄期和浸水条件对植被混凝土无侧限抗压强度的影响。     

Physicochemical substance properties as indicators for unreliable exposure in microplate-based bioassays

In the last years many efforts were made to transform standardized algal test protocols into low-cost microplate assays. While advantages were pointed out frequently, limitations are not systematically addressed, thus hindering a widespread utilisation. In this study a group of organic substances with a wide distribution of volatility (log K_AW from −6.53 to −2.13) and lipophilicity (log K_OW from 1.26 to 4.92) was investigated with respect to the influence of these physicochemical properties on their algal toxicity in different assays. Therefore the EC₅₀ values were determined with a microplate assay based on ISO 8692 protocol and the results were compared with those of an established algal growth inhibition test conducted in air tight glass vessels. Using the ratio of the EC₅₀ values, a clear connection between biological response and volatility as well as lipophilicity of test substances could be detected. Chemicals with a log K_OW higher than 3 or a Henry coefficient log K_AW higher than −4 were identified as less effective in the microplate assay than in the comparative assay. The loss in nominal concentration due to physicochemical properties could be shown to contribute to this using HPLC analysis. Consequently, when using microplate assay’s one should be aware that lipophilic and volatile chemicals might be underestimated in their toxicity, which could be indicated from evaluating related physicochemical properties modelled from structural information prior to an experimental investigation.     

‘A powerful alternative to Williams’ test with application to toxicological dose-response relationships of normally distributed data

The comparison of increasing doses of a treatment to a negative control is frequently part of toxicological studies. For normally distributed data Williams (1971, 1972) introduced a maximum likelihood test under total order restriction. But until now there seems to have been no solution for the arbitrary unbalanced case. According to the idea proposed by Robertson et al. (1988) we will apply in this article the basic concept of Williams on the class of multiple contrast tests for the general unbalanced parametric set-up. Simulation results for size and power and two examples for estimating the minimal toxic dose (MTD) are given.