Gender differences in driver's license theory test scores in the Netherlands

INTRODUCTION: Gender differences were investigated in a sample of persons (N=34,755) who completed the driver's license theory test in the Netherlands. RESULTS: Contrary to recent findings from Sweden, no gender differences were found. IMPACT OF INDUSTRY: The present study signifies the importance of standardization in driver testing.     

某铅锌矿爆破有害效应分析及安全评估

以某铅锌矿爆破施工为背景,在现场试验的基础上,对测得的振动速度进行回归分析,得到场地爆破振动衰减规律,并结合爆破主频率,确定了周围民房的容许振动速度为2cm/s。同时,对爆破冲击波和噪声进行研究,结果表明:爆破振动、冲击波和噪声均与爆心距、炸药量有关。当爆心距相同时,噪声对建筑物和人员的影响最大,空气冲击波次之,爆破振动较小。主要从控制最大段药量和爆源距安全原则考虑,提出了防爆破振动、噪声和冲击波及飞石的安全距离。另外,还提出了硐口悬挂3层麻袋、堵塞炮泥和控制起爆网络中段间微差等安全措施,并对有害效应进行评估,其结果对后续爆破设计和施工具有实用价值和指导意义。     

基于双剪屈服条件的输油管道腐蚀剩余强度可靠性研究

提出基于双剪屈服塑性极限条件的管道可靠性爆破压力可靠度模型,在基于剩余强度可靠性理论基础上,着重分析随机参数,即腐蚀深度、腐蚀长度和运行压力的分布情况,通过经典可靠性计算方法、JC法将非正态分布转化成标准正态分布,从而建立起基于双剪屈服条件的管道腐蚀可靠性计算模型。通过提取现场实验数据进行验算,其结果表明:双剪屈服强度理论算得的爆破压力更接近实验结果,该方法降低API579的保守性,大大提高了可靠性的计算精度。     

Utilization of washed MSWI fly ash as partial cement substitute with the addition of dithiocarbamic chelate

The management of the big amount of fly ash as hazardous waste from the municipal solid waste incinerator (MSWI) has encountered many problems in China. In this study, a feasibility research on MSWI fly ash utilization as partial cement substitute in cement mortars was therefore carried out. MSWI fly ash was subjected to washing process to reduce its chlorine content (from 10.16% to 1.28%). Consequently, it was used in cement mortars. Ten percent and 20% replacement of cement by washed ash showed acceptable strength properties. In TCLP and 180-day monolithic tests, the mortars with washed ash presented a little stronger heavy metal leachability, but this fell to the blank level (mortar without washed ash) with the addition of 0.25% chelate. Therefore, this method is proposed as an environment-friendly technology to achieve a satisfactory solution for MSWI fly ash management.     

Corrosion and polarization behavior of carbon steel in MEA-based CO2 capture process

This work reveals levels of corrosion rate and polarization behavior of carbon steel immersed in aqueous solutions of monoethanolamine (MEA) used in the absorption-based carbon dioxide (CO₂) capture process for greenhouse gas reduction from industrial flue gas streams. Such information was obtained from electrochemical-based corrosion experiments under a wide range of the CO₂ capture process conditions. The corrosion of carbon steel was evaluated in respect to process parameters including partial pressure of oxygen (O₂), CO₂ loading in solution, solution velocity, solution temperature, MEA concentration and metal surface condition. Results show that the aqueous MEA solution containing CO₂ provides a favorable condition for the corrosion of carbon steel to proceed. Corrosion rate is increased by all tested process parameters. These parametric effects were explained by the electrochemical kinetic data obtained from polarization curves and by the thermodynamic data obtained from Pourbaix diagram.     

Laboratory longitudinal diffusion tests: 1. Dimensionless formulations and validity of simplified solutions

To obtain reliable diffusion parameters for diffusion testing, multiple experiments should not only be cross-checked but the internal consistency of each experiment should also be verified. In the through- and in-diffusion tests with solution reservoirs, test interpretation of different phases often makes use of simplified analytical solutions. This study explores the feasibility of steady, quasi-steady, equilibrium and transient-state analyses using simplified analytical solutions with respect to (i) valid conditions for each analytical solution, (ii) potential error, and (iii) experimental time. For increased generality, a series of numerical analyses are performed using unified dimensionless parameters and the results are all related to dimensionless reservoir volume (DRV) which includes only the sorptive parameter as an unknown. This means the above factors can be investigated on the basis of the sorption properties of the testing material and/or tracer. The main findings are that steady, quasi-steady and equilibrium-state analyses are applicable when the tracer is not highly sorptive. However, quasi-steady and equilibrium-state analyses become inefficient or impractical compared to steady state analysis when the tracer is non-sorbing and material porosity is significantly low. Systematic and comprehensive reformulation of analytical models enables the comparison of experimental times between different test methods. The applicability and potential error of each test interpretation can also be studied. These can be applied in designing, performing, and interpreting diffusion experiments by deducing DRV from the available information for the target material and tracer, combined with the results of this study.     

The early warning of aquatic organophosphorus pesticide contamination by on-line monitoring behavioral changes of Daphnia magna

In this paper, the movement behavior of Daphnia magna was studied as a bio-indicator of organophosphorous pesticide (OP) contamination, using an on-line bio-monitoring method, the Multispecies Freshwater Biomonitor. A static test of acute toxicity test revealed the 24-h and 48-h LC(50) values (95% confidence limit) for Daphnia magna to be respectively 0.45 microg/l and 0.21 microg/l for dipterex 3.80 microg/l and 0.90 microg/l for malathion, and 1.25 microg/l and 0.38 microg/l for parathion. The behavior strength of Daphnia magna was a sensitive indicator of sublethal OP stress and resulted in significant concentration-response relationships for the three OPs. Increasing OP concentration will result in more intensive behavioral responses of Daphnia magna and shorter response time, which could be described by the Stepwise Stress Model (SSM). Therefore movement behavior can be effectively applied in early warning of environment quality by on-line bio-monitoring. The intensive changes in behavior strength of Daphnia magna over a short time follow the SSM concept and can be used as an indicator of early stress response to OP accidental contamination.     

A multi-directional tracer test in the fractured Chalk aquifer of E. Yorkshire, UK

A multi-borehole radial tracer test has been conducted in the confined Chalk aquifer of E. Yorkshire, UK. Three different tracer dyes were injected into three injection boreholes and a central borehole, 25 m from the injection boreholes, was pumped at 330 m(3)/d for 8 days. The breakthrough curves show that initial breakthrough and peak times were fairly similar for all dyes but that recoveries varied markedly from 9 to 57%. The breakthrough curves show a steep rise to a peak and long tail, typical of dual porosity aquifers. The breakthrough curves were simulated using a 1D dual porosity model. Model input parameters were constrained to acceptable ranges determined from estimations of matrix porosity and diffusion coefficient, fracture spacing, initial breakthrough times and bulk transmissivity of the aquifer. The model gave equivalent hydraulic apertures for fractures in the range 363-384 microm, dispersivities of 1 to 5 m and matrix block sizes of 6 to 9 cm. Modelling suggests that matrix block size is the primary controlling parameter for solute transport in the aquifer, particularly for recovery. The observed breakthrough curves suggest results from single injection-borehole tracer tests in the Chalk may give initial breakthrough and peak times reasonably representative of the aquifer but that recovery is highly variable and sensitive to injection and abstraction borehole location. Consideration of aquifer heterogeneity suggests that high recoveries may be indicative of a high flow pathway adjacent, but not necessarily connected, to the injection and abstraction boreholes whereas low recoveries may indicate more distributed flow through many fractures of similar aperture.     

混凝试验搅拌器的研制

影响混凝效果的因素众多,混凝沉淀烧杯试验是进行水的混合、絮凝、沉淀工艺研究、设计和生产指导的最有效方法之一,阐述了智能型混凝试验搅拌器的设计原理和技术性能.     

工作场所有害物质氮氧化物测定的质量保证

工作场所空气中产生的有毒物质氮氧化物的测定是用吸收液采集空气样品后送达实验室检测，是采样与显色同时进行，方法的关键是采样前吸收液的配制与采样后样品的运输、保存及其测定。要得到准确、可靠的监测数据，一定要从样品的采集、保存，实验室分析等各个环节加以控制。