乔治王岛菲尔德斯半岛火山岩岩石学特征及岩浆成因与演化

菲尔德斯半岛出露一套第三纪岛孤火山岩,包括高铝玄武岩、玄武安山岩、及少量安山岩与英安岩,从早到晚可划分为碧玉山段、玛瑙滩段、化石山段和岩块山段四个岩性段.它们属于同一钙碱性岩浆演化系列,其中高铝玄武岩是其它火山岩的母岩.高铝玄武岩的形成过程可分两个阶段:首先是上地幔楔经过20～25％的部分熔融生成原生橄榄拉斑玄武质岩浆,然后原生岩浆再经40％的矿物分离结晶作用(其中橄榄石占30％,单斜辉石占70％)而分异形成高铝玄武岩浆.     

石英表面配合物与溶解动力学模型

阐述了石英表面配合物和溶解动力学机理之间的关系，指出了石英的反应性主要受负电性表面物种的控制，从而导致电解质、离子强度、pH等因素对石英溶解的催化效应．溶解达率的提高与反应活化能的降低成活化熵的增大有关。最后，介绍了在过渡态理论和表面反应模型基础上建立的石英溶解速率方程。     

再论次生石英岩型非金属矿床

次生石英岩型非金属矿床明显受不同级别的火山构造控制,是中—酸性火山岩区一套很有特色的矿床组合;热源、水源、地层产状有机组合生成的环流热液是成矿的前提之一;成矿流体以重碳酸盐型、硫酸盐型为主,属中—低盐度热液;温度、pH值、fo_2等物理化学条件是矿床及矿种类刑的重要控制因素。本文在《次生石英岩容矿型非金属矿床系列的矿种、组合及其成矿作用特征》(1986)一文基础上,进一步总结这类矿床的成矿机理和地质地球化学模式。     

Dynamic fate modeling of γ-hexachlorocyclohexane in the lower reaches of the Liao River

A QWASI model dependent on temperature is parameterized to describe the long-term fate of persistent organic pollutants (POPs) in the Liao River. The model parameters, namely fugacity capacity, degradation rate, and transfer coefficient, are profoundly affected by temperature. This model is used to simulate the fate of γ-hexachlorocyclohexane (γ-HCH) in the lower reaches of the Liao River from 1998 to 2008. Modeling results show that γ-HCH fugacity capacities in air, water, and sediment increase as temperature decreases, and the transfer and transformation rate coefficients increase as temperature increases. The variations of transfer and transformation parameter D values depend on fugacity capacities, and transfer and transformation coefficients simultaneously. The performance of the model is evaluated by comparing the predicted and observed concentrations in the water and sediment of the Liao River. The predicted values agree well with the observed value in the order of magnitude, in most cases within the factor of 3. It is believed that the model is appropriate for simulating the long term fate of POPs in the Liao River. Translated from Environmental Science, 2006, 27(1): 121–125 [译自: 环境科学]     

变速器壳体低周疲劳优化设计

目的 分析变速器壳体驻车耐久试验的失效根本原因,对变速器壳体进行低周疲劳优化设计.方法 首先排查壳体的化学成分、铸造质量,排除材料和工艺引起失效问题的可能性,然后通过有限元方法分析驻车轴孔的最大拉应变、驻车工况壳体变形、轴孔接触区域.根据局部应变分布特征,提出驻车轴修形的优化方案,并且根据壳体材料的低周疲劳参数,确定Coffin-Manson模型,并根据该模型预测壳体驻车轴孔优化前后的疲劳寿命.结果 驻车轴孔的最大拉应变高达0.95％,确定应变过大是导致壳体失效的根本原因.驻车轴度修形的优化方案将最大拉应变降低到0.40％,塑性应变占比由42％降低到5％,疲劳寿命的预测值由原来的175次提高到7980次,满足试验循环次数1000次的要求,最终优化物理样机通过了驻车耐久试验验证.结论 使用的Coffin-Manson模型参数能准确地预测变速器壳体的低周疲劳寿命,驻车轴小角度修形优化方案能够有效解决局部应变过大的失效问题,具有一定的工程参考意义.     

溧阳市国家级生态示范区建设工作初探

综述了溧阳市创建国家级生态示范区的背景、依据、基础条件、创建的目标和技术路线，介绍了示范区建设的内容和具有特点的生态经济发展模式。     

管式反应器石灰雾液脱硫的数学模拟

建立的一维管式反应器雾液脱硫模型是对蒸发和吸收过程的耦合，以膜理论为基础的吸收机理同时考虑了含硫组分的离解、扩散、反应和固体颗粒的溶解。参数敏感性分析表明，对系统脱硫率影响最显的是出口干湿球温差，石灰颗粒粒度和入口ＳＯ２浓度、传质过程的分析表明，反应开始阶段液膜扩散和固体溶解阻力均存在，而气膜扩散在整个反应过程中都起着重要作用。     

Study of prediction for groundwater contamination in wastewater land treatment system

This paper uses a prediction model of groundwater pollution based on the experiments in the laboratory and in field .The model, which was tested and calibrated by the field observated data ,satisfactorily simulated the field conditions in land treatment system of wastewater . Particularly , the model can provide the reliable pollution prediction of heavy metals , organisms and nitrogen . The model was used to predict the groundwater pollution caused by the land treatment system in the region of North China . The calibration of the model showed that correlation coefficients between the tested and predictive data of Cr6+. As3+, organism and NH4+ could reach 0.990, which proved that the model possessed the realistic instructive significance for design and use of wastewater land treatment systems .     

京津风沙源区防风固沙功能的时空变化及其区域差异

防风固沙功能是京津风沙源治理成效的关键监测指标。以往研究注重局地防风固沙功能的评估,对全区防风固沙功能的时空变化与内部差异揭示不足。基于京津风沙源区多期遥感数据,采用修正风蚀方程与GIS空间统计技术,评估分析了2000-2015年防风固沙功能的整体变化及其区域差异。结果表明:(1)京津风沙源区年均防风固沙量为28.98亿t,防风固沙能力为68.24 t/hm~2,且均随年份变化波动增加,年均增速分别为1.10%和0.71%;(2)京津风沙源区防风固沙能力呈西北高、东南低趋势,有49.06%的区域防风固沙能力高于70 t/hm~2,评估期内有54%的区域防风固沙能力明显提高;(3)浑善达克沙地亚区、典型草原亚区和荒漠草原亚区的防风固沙量累计为全区防风固沙总量的88%,燕山丘陵山地水源保护亚区和晋北山地丘陵亚区的防风固沙能力提升最显著;(4)锡林郭勒盟、赤峰市和乌兰察布市的防风固沙量合计占全区防风固沙量的77%,朔州市与包头市防风固沙能力较高,北京市与天津市防风固沙能力增速较高。因此,未来应重视分区施策治理与西部和北部防风固沙功能提升。     

Developing Canada's National Forest Carbon Monitoring, Accounting and Reporting System to Meet the Reporting Requirements of the Kyoto Protocol

The rate of carbon accumulation in the atmosphere can be reduced by decreasing emissions from the burning of fossil fuels and by increasing the net uptake (or reducing the net loss) of carbon in terrestrial (and aquatic) ecosystems. The Kyoto Protocol addresses both the release and uptake of carbon. Canada is developing a National Forest Carbon Monitoring, Accounting and Reporting System in support of its international obligations to report greenhouse gas sources and sinks. This system employs forest-inventory data, growth and yield information, and statistics on natural disturbances, management actions and land-use change to estimate forest carbon stocks, changes in carbon stocks, and emissions of non-CO₂ greenhouse gases. A key component of the system is the Carbon Budget Model of the Canadian Forest Sector (CBM-CFS). The model is undergoing extensive revisions to enable analyses at four spatial scales (national, provincial, forest management unit and stand) and in annual time steps. The model and the supporting databases can be used to assess carbon-stock changes between 1990 and the present, and to predict future carbon-stock changes based on scenarios of future disturbance rates and management actions.