共振光散射技术在环境分析中的应用

共振光散射技术是一项在普通荧光分光光度计上进行测量的光散射技术,文章简要介绍了光散射现象,共振光散射的基本原理并作了定量基础讨论,对共振光散射技术在环境分析中的应用作了初步研究。     

流动注射法测定水中总碳酸盐

将流动注射应用于水中总碳酸盐的分析,并研究了各种实验条件对于结果的影响。实验证明,这种方法基本不存在干扰,在采样量为0.05ml时,检出限(3σ)为80mg/L;峰高的检测范围100~1000mg/L;峰宽的检测范围1000~5000mg/L,能够很好地应用于火力发电厂中生水、锅炉水的总碳酸盐测定。     

A study on the orbit of air temperature movement

In this paper, we describe an air temperature movement by mapping its time series to the polar coordinates: the value of the time series is plotted on the radial coordinate and the time on the angular coordinate. In this way, both the yearly and daily air temperature movements from five different locations of China are used to demonstrate that, in an intuitionistic view, air temperature movement is neither random nor chaotic, but has its own orbit. We then propose an elliptic orbit model for the air temperature movement. Our proposed model provides quite good results when it is applied to the evaluation of yearly air temperature movements in eight locations in various parts of the world, and the evaluation of daily air temperature movements in five locations in Hunan Province of China on December 17, 2005. Results show that our approach provides a concise and helpful model for air temperature analysis.     

南通市冬季PM2.5中水溶性离子污染特征

根据南通市2016和2017年冬季大气多参数站自动监测PM2.5数据和在线离子色谱分析仪Marga监测的PM2.5中水溶性离子数据,分析了南通市冬季PM2.5中水溶性离子污染特征。结果表明,南通市2016和2017年冬季,ρ(PM2.5)分别为58和54μg/m 3,均高出其年均值(14μg/m^3);ρ(水溶性离子)总占ρ(PM2.5)百分比分别为74.5%和74.3%;二次离子ρ(NO3^-、SO4^2-和NH4^+)占ρ(PM2.5)百分比分别为66.8%和66.6%;各水溶性离子占比大小依次为:NO3^-、SO4^2-、NH4^+、Cl^-、K^+、Na^+、Ca^2+、Mg^2+。对ρ(NO3^-)/ρ(SO 4^2-)分析表明,移动源已经成为南通市冬季的主要污染源,且呈逐年增强趋势。对氯氧化率和硫氧化率的分析表明,南通市冬季存在较明显的二次污染,SO2的转化程度大于NO2。除Na^+和Mg^2+外,其他离子与PM2.5均呈显著相关性,NO3^-、SO4^2-与NH4^+之间的相关系数最高,Cl^-与除Na^+外的所有阳离子均呈显著相关性。     

铁路运输业污水治理系统分析

研究了乌鲁木剂铁路局系统污水治理污染控制方法及途径，提出了主要污染物为石油类，其最佳治理对策是：确定重点污染单位、污染源、用最低的治理投入，选择斜板隔油气浮工艺治理重点污染和次重点污染部门，得到较好的治理效果，否定盲目追求“零排放”的高投入方案。     

Estimation of the Thermal Sensitivity of a Dwelling to Variations in Architectural and Behavioural Parameters

The provision of energy for households is a major contributor to greenhouse gas emissions in the domestic sector. There is significant scope for energy savings and thus emission reduction in this sector. This paper constructs a bridge between thermal analysis and environmental assessment in the occupancy stage of the dwelling life cycle, approaching both methods as being on a common system Environment–Dwelling–Inhabitant. The importance of the local level in the thermal analysis and assessment of either a dwelling or an inhabitant's behaviour is demonstrated. It is shown that the researcher can choose between natural experiment, computer experiment and mathematical modelling to analyze the system. Such a choice is discussed for two particular methods of thermal analysis. Thermal Nomograms are the result of mathematical modelling, and the Energy Score Sheet is the result of a computer experiment in energy rating. Despite being developed for the purpose of thermal analysis, these methods can also be utilized for environmental assessment at the local level. The discussion centres on Australian conditions where the majority of the population resides in a relatively benign climate wherein behavioural alterations have significant potential for energy savings and environmental impact. The purpose of the paper is to emphasise benefits apart from energy minimisation to promote the use of energy efficient housing strategies.     

灰色系统GM（1,1）模型在城市地下水总硬度预测中的应用

应用灰色系统GM(1,1)模型,对地下水中总硬度的变化作了预测.检验结果表明,该模型精度较高,是一种较好的预测方法.     

基于网格空间数据的晋陕蒙接壤区生态环境综合评价

晋陕蒙接壤区是典型的生态过渡带、生态脆弱带。文章在调查研究的基础上 ,选取了 1 3个评价指标 ,应用层次分析法确定其权重 ,并将各个因子分级标准化和定量赋值 ,再用加权求和法得到每个评价单元的环境质量综合评价指数。根据环境综合评价指数将环境质量分为较好 (≥ 8)、一般 (≥ 6～ <8)、较差 (≥ 4～ <6)、恶劣 (<4) 4级。结果表明 :晋陕蒙接壤区的环境质量大多处于较差等级 ,较好、一般、较差、恶劣等级的面积比例分别为 2 .2 % ,2 8% ,5 7.4%和1 2 .4%     

"一控双达标"验收监测中存在的局限性及需采取的措施

文章就此次"一控双达标"验收监测中所反映的一些问题,提出一些观点和建议,为今后达标验收监测及环境管理提供对策.     

基于实时嵌入式操作的移动环境监测系统

利用面向对象技术、多线程技术和动态链接技术在嵌入式操作Windows CE上开发了移动环境监测系统。介绍了基于实时嵌入式操作的移动环境监测系统的设计原理、系统框架及关键技术。指出在嵌入式计算机上实现移动环境监测，既可以进行在线环境监测，也可以减少开发的费用和硬件投资。该系统的特点是集成度高，体积小，反应速度快，智能化高，稳定性好和可靠性强。