UASB+SBR工艺处理皂素生产废水的快速启动研究

皂素生产废水为难处理高浓度酸性含硫有机废水.其中高含量的硫酸盐在厌氧条件下产生大量的H2S,造成了对厌氧微生物的抑制作用,严重影响厌氧生物处理的效果,甚至使厌氧消化完全失败,使该类废水的处理较为困难.为了有效解除硫酸盐对生物处理设施中微生物的抑制,找出皂素生产废水的快速启动运行的方法,本文选用了UASB SBR组合工艺进行了2个月左右的动态连续流实验,对硫酸盐抑制的解除方法进行了研究,提出了相应的解除硫酸抑制厌氧消化的方法,找到了UASB快速启动的有效方法.小试连续运行实验结果表明,在UASB中加入适量铁屑和活性炭颗粒,以生活污水处理厂剩余污泥为种泥可以成功实现UASB SBR处理系统的快速启动,消除DO2-4对生物处理系统的影响,并在较短的时间内(21 d左右)培养出了厌氧颗粒污泥.UASB启动后,在进水COD质量浓度34 000mg/L左右时,COD的去除率一直保持在95%以上,出水COD质量浓度维持在1 300 mg/L左右.厌氧出水经过SBR处理后,出水水质达到了<综合污水排放标准>中的二级排放标准要求.该快速启动方法可供类似酸性高浓度有机废水处理和调试参考.     

半刚性路面基层环境影响评价研究

采用输人输出模型,通过清单分析和归一化处理对我国典型的路面基层材料水泥稳定粒料与石灰稳定粒料以及几种工业固体废弃物路面基层材料的环境影响进行了研究并和水泥混凝土进行了对比.结果表明,工业固体废弃物路面基层对资源能源消耗量少,生产过程中固体废弃物、温室气体、酸雨气体的排放量小.和我国目前广泛使用的水泥稳定粒料相比,其环境影响较小,而且可以被再循环用作水泥生产的混合材,是一类典型的生态建筑材料.     

甲胺磷在水-气界面挥发动力学研究

研究了挥发时间、温度和气流量对农药甲胺磷在水-气界面挥发行为的影响.挥发量采用气相色谱法检测,利用保留值定性,以外标法定量.研究结果表明,温度升高、气流量增大,使甲胺磷挥发量增大较快,二者是影响甲胺磷挥发的主要因素;挥发时间在4 h之内对甲胺磷挥发量影响较大,4 h之后基本无影响.通过试验还研究了甲胺磷在水-气界面的挥发动力学.根据实验结果,建立了甲胺磷在水-气界面挥发的动力学模型,比较实验值与动力学模型计算值,二者基本吻合,相对误差≤5%,这表明该动力学模型可以用于预测甲胺磷在水-气界面的挥发行为.     

曝气生物滤池中总有机碳及氨氮的变化和对硝化作用的影响

采用以页岩陶粒为载体的曝气生物滤池(BAF)为反应器,研究了BAF运行中总有机碳和NH4 -N浓度沿滤层变化的规律,以及对硝化作用的影响.结果显示,在进行污水深度处理时,在BAF前段TOC的去除率占滤池总去除率的72.3%～100%;NH4 -N的去除率占滤池总去除率的91.8%～100%.碳化与硝化作用并存于BAF中,硝化作用随滤层加深而加强.水质和BAF滤料的结构特点是影响碳化与硝化作用的主要因素.     

Cu(NO3)2在亚甲蓝湿式氧化处理中的应用

用CWAO技术处理COD为2 000 mg/L的亚甲蓝水溶液.以Cu(NO3)2为催化剂,考察了催化剂投加量、反应温度、压力及进水pH值对亚甲蓝水样COD去除率、脱色率、出水pH值的影响.实验表明,亚甲蓝的氧化效率随催化剂投加量的增加,反应温度及压力的升高而升高.然而,综合考虑亚甲蓝的氧化效率、试剂费用、设备成本及能量消耗,实验确定Cu(NO3)2的投加量以Cu2 计为150 mg/L,反应温度及压力分别为200℃和2.0 MPa.在酸性进水条件下,COD去除率随进水pH值的降低而升高;而在碱性进水条件下,COD去除率随进水pH值的升高而升高.pH值按COD去除率由高到低的排列顺序是:3.87、11.23、5.50、7.25、9.47,实验确定最佳进水pH值是3.87.在以上最佳的操作条件下,反应150 min,水样COD去除率达97.4%,脱色率达99.97%,出水pH值3.63.     

Book reviews and notices

The aim of sustainable development is to balance social, economic, and environmental needs. In order to justify the decisions they make, stakeholders must quantify the different impacts found in the operations and developments of companies and/or projects throughout their life cycle. However, as some areas are subjective in nature, the quantification process of the different impacts and the assessment of sustainable development performance become arduous tasks of development, validation, and application of scientific and empirical methods with the intrinsic objective of finding an agreement among the involved parties (i.e., stakeholders). Several environmental and sustainability assessment tools, instruments, processes, and methodologies have been developed; rating systems stand out and have gained attention and credibility, as demonstrated by the vast number of certified projects around the world and the widely-known usefulness and advantages of their application. The Wa-Pa-Su project sustainability rating system presents an integrated approach to sustainability assessment by integrating three distinctive areas of knowledge: (1) sustainable development theory and fundamentals supports the ultimate goal of the rating system, which is to contribute to sustainability, with the aim of finding a path to balance social, economic, and environmental needs; (2) continual performance improvement becomes essential due to the duration of the projects, as it is critical to allow organizations or projects to improve performance over time; and (3) multi-criteria decision analysis assists with the assessment process through stakeholder engagement and participation, and the design and implementation of a criteria weighting system.     

Assessing the relative impacts of the factors affecting MIS adoption process

Micro-irrigation systems (MIS) have been at the forefront of policy-making and social research in exploring determinants that could potentially impact the adoption of MIS technologies in the field to fulfil the basic aim of enhanced agricultural productivity and enriched nutritional quality of the produce with optimal adoption of natural resources. Therefore, this study was undertaken to determine why MIS technologies have not been adopted to the extent anticipated, so that suitable policy schemes, promotional schemes and socio-technical frameworks could be formulated for their enhanced adoption to enhance the socio-economic status of the farming community in the Dahod district of Gujarat State, India. A study of 350 non-MIS (NMIS) and 350 MIS farmers was conducted to identify factors affecting the MIS adoption process. The logit model was fitted using XLSTAT software (XLSTAT 2014.1.04) to the explanatory variables (determinants) of the MIS adoption process. Type III analysis and ANOVA were conducted to test the relative significance of the explanatory variables adopted. It was found that total income had the highest weight (or beta coefficient, i.e. 0.625) followed by total land area (0.546), motor horsepower (0.499), dependency ratio (0.397), and education (0.295) and age of household head (0.207). Furthermore, to assess the efficacy of the logit model, the ROC curve was also developed and the AUC was found to be 0.881, and therefore the model was considered to discriminate well in identifying the factors affecting the MIS adoption process. The study found that higher total income and education level increase the likelihood of MIS adoption and agricultural water management, and therefore special training programmes on installation, as well as repair and maintenance, of MIS systems and agricultural water management can be planned at the institutional/organisation level. The total cultivable area is also one of the important determinants in MIS adoption, and therefore the adoption of MIS schemes should not be restricted to large farmers only, but rather should be extended to both small and marginal farmers.     

The growing role of web‐based geospatial technology in disaster response and support

This paper examines changes in disaster response and relief efforts and recent web‐based geospatial technological developments through an evaluation of the experiences of the Center for Geographic Analysis, Harvard University, of the Sichuan (2008) and Haiti (2010) earthquake responses. This paper outlines how conventional GIS (geographic information systems) disaster responses by governmental agencies and relief response organisations and the means for geospatial data‐sharing have been transformed into a more dynamic, more transparent, and decentralised form with a wide participation. It begins by reviewing briefly at historical changes in the employment of geospatial technologies in major devastating disasters, including the Sichuan and Haiti earthquakes (case studies for our geospatial portal project). It goes on to assess changes in the available dataset type and in geospatial disaster responders, as well as the impact of geospatial technological changes on disaster relief effort. Finally, the paper discusses lessons learned from recent responses and offers some thoughts for future development.     

Exploring system interactions for building resilience within coastal environments and communities

This paper focuses on identifying examples of first-order system interactions, which make important contributions to building coastal resilience for coastal zone management. This discussion is based on an application of the Institutional Analysis and Development Framework to a case-study analysis of coastal management in South Australia. The study suggests that cross-scale interactions and informal relationships within and between users and managers are key interactions defining resilience outcomes within the current system. A significant constraint on improving resilience was the lack of evaluative criteria for identifying sustainable forms of system behaviour. The paper argues that resilience is a function of a normative statement on the characteristics desirable in the functioning system. Analyses of coastal resilience, which facilitate greater understanding of the range of complexities in coastal behaviour, are therefore central to gaining the most useful insights into the options and pathways for building more sustainable coastal futures.     

A/O法处理水产品加工废水

采用A/O工艺处理水产品加工废水,处理量为500 t/d,运行两年来,效果稳定,处理结果表明:对COD、BOD5和氨氮的去除率分别为94.7%、98.1%和86.4%,出水达到GB 8978—1996《污水综合排放标准》中的一级排放标准,且该工艺具有运行费用低、处理效果好、操作管理方便等一系列优点。