漓江上游植被覆盖度时空变化对地表热场影响

自20世纪80年代以来,桂林漓江由于上游森林遭受破坏出现水生态环境快速恶化的趋势。地表热场的时空变化直接影响森林蒸散及水文效应。因此,对漓江上游1989~2006年5景TM/ETM+卫星图像,利用归一化植被指数反演植被覆盖度,利用单窗算法反演地表温度,提出归一化温度使不同时相地表热场具有可比性,分析植被覆盖度时空变化对地表热场的影响。结果表明,在空间上,地表温度随植被覆盖度的增加而降低,在植被覆盖度很高或很低时,这种影响相对变弱;在时间上,漓江上游1989~2000年植被中、高度覆盖面积从96.1%逐年下降到65.9%,导致归一化地表温度数值较高的像元比例相应增加;2000~2006年植被中、高度覆盖面积逐渐恢复上升到90.8%,但仍略低于1989年,使得归一化地表温度数值较高的像元比例相应减少。植被覆盖可以有效地降低漓江上游地表温度     

中水回用于火电厂循环水存在问题探讨

水资源短缺已成为制约火电厂建设与发展的瓶颈。近年来,火电厂为提高水的利用率、降低新鲜水取水量而采用了以城市污水处理厂出水（中水）为水源,经深度处理后回用于循环水的节水方法。分析了该方法的优缺点,并针对实施过程中出现的问题提出了解决方案,使中水作为水源用于火电厂循环水更加具有实用性。     

上海火电厂烟气脱硫现状分析与建议

介绍了上海火电厂烟气脱硫的现状,对脱硫工艺选择、脱硫效率进行了分析。阐明了我国烟气脱硫普遍选用的石灰石一石膏湿法脱硫的特点和局限性,探讨了建立SO2排污权交易制度的必要性和可行性,分析了烟气脱硫装置存在的问题及预防措施。     

纳米铁催化分解高氯酸盐废水的反应动力学

通过实验考察了酸性条件下纳米铁催化分解高氯酸盐过程中的影响因素,对其分解的动力学进行了研究,并对纳米铁催化剂结构及微观形貌进行SEM、EDS和XRD表征分析。利用阿仑尼乌斯方程和幂指数方程拟合反应动力学方程,获得了高氯酸盐分解动力学方程Ct=C0exp{-0.03773exp(-201.65/T)[H]0.191t},理论的计算值与实验值吻合较好,误差在15%以内。     

基于MODIS的渍害田和正常农田遥感特性对比研究

渍害田在我国南方地区分布广泛,严重影响农业生产。以四湖流域洪湖地区为实验区,基于渍害田的物理及生态特性来探讨渍害田遥感识别特性。利用2002～2011年MODIS产品,辅以土壤图、土地覆被数据,对比分析了正常农田及渍害田在反照率、增强型植被指数（EVI）、地表夜温、地表温差和表观热惯量的时相差异;并结合相关研究成果加以解释和验证。结果表明：一年中大部分时段,正常农田的反照率、EVI、地表温差都大于渍害田,而地表夜温、表观热惯量都低于渍害田;各指标的多年平均值也具有类似差别;渍害田的EVI在6、7月份比正常农田高, 可能是由于渍害田在雨、热、肥条件同时良好时比正常农田生长的更快。研究结果可为进一步准确识别渍害田空间分布及其动态变化     

The Factor Decomposition on Carbon Emission of China——Based on LMDI Decomposition Technology

Carbon emission is the current hot issue of global concern. How to assess various contributing factors for carbon emission is of great importance to find out the key factors and promote carbon emission reduction. In this paper, the author constructs an identical equation for carbon emission, based on the economic aggregate, the economic structure, the efficiency of energy utilization, the structure of energy consumption, and the coefficient of carbon emission; by applying to LMDI decomposition technology, the author analyzes the carbon emission of China from 1995 to 2007 at industrial level and regional level. The results show that the expansion of economic aggregate is the main reason for China’ s rapidly increasing carbon emission and the increase of energy utilization efficiency is the key factor that can hold back the increase of carbon emission. In addition, the change of industrial structure or regional structure and the change of traditional energy structure have limited influence on the carbon emission, and their potentials have not yet been exploited. At the end of this paper, the author proposes the efforts that China should make to reduce carbon emission.     

火电燃料消费过程对资源环境的影响评估

我国以化石能源为主要燃料的火电生产导致了严重的资源枯竭和环境污染问题,定量评估火电燃料消费对资源环境的影响是区域可持续发展研究的重要内容。在估算火电燃料燃烧及运输、生产过程中排放的主要大气污染物的基础上,利用成分法计算相应的生态足迹,定量评估火电燃料消费过程对资源环境的影响。结果表明：我国1 kW〖DK〗·h火电的燃料消费过程中排放的CO2、CH4、NOx、SO2、烟尘分别为107 kg、993×10-3 kg、646×10-3 kg、260×10-3 kg、202×10-2 kg;全国火电燃料消费占用的生态足迹由2000年的50 67444万hm2,增加到2007年的123 84208万hm2,年均增长1362％;CO2和NOx的生态足迹平均比重高达836％,是影响资源环境的主要因子,SO2、烟尘与CH4三者合计仅164%,对资源环境的冲击相对较小     

The boiling liquid expanding vapour explosion

The boiling liquid expanding vapour explosion (BLEVE) has existed for a long time and for most of this time it has been cloaked in mystery. Several theories have been put forward to explain this very energetic event but none have been proven. This paper describes a series of tests that have recently been conducted to study this phenomenon.

The study involved ASME code automotive propane tanks with nominal capacities of 400 litres. The tanks were exposed to a combination of pool and/or torch fires. These fire conditions led to thermal ruptures, and in some cases these ruptures resulted in BLEVEs. The variables in the tests were the pressure-relief valve setting, the tank wall thickness, and the fire condition.

In total, 30 tests have been conducted, of which 22 resulted in thermal ruptures. Of those tanks that ruptured, 11 resulted in what we call BLEVEs. In this paper, we have defined a BLEVE as the explosive release of expanding vapour and boiling liquid following a catastrophic tank failure. Non-BLEVEs involved tanks that ruptured but which only resulted in a prolonged jet release.

The objective of this study was to investigate why certain tank ruptures lead to a BLEVE rather than a more benign jet-type release. Data are presented to show how wall temperature, wall thickness, liquid temperature and fill level contribute to the BLEVE process.     

VARIABILITY IN THERMAL STRATIFICATION IN A RESERVOIR1

ABSTRACT: The thermal stratification characteristics of a flow-augmentation reservoir, Round Valley Reservoir, New Jersey, and attendant driving conditions were documented and analyzed for portions of three years. Substantial differences in the thermal stratification regime of the reservoir occurred in response to the documented changes in meteorological, operating, and light penetration conditions. The features of stratification that were affected included: the depth of the upper mixed layer, the average temperature of the epilimnion, the temperature gradient in the metalimnion, and the average temperature in the hypolimnion.