焦化废水处理工程调试运行研究

针对焦化废水处理调试运行存在的问题,以实际运行中的焦化废水处理工程为例,介绍了其调试运行过程.指出焦化废水调试及稳定运行的控制要点,并提出调试运行过程中可能出现的问题及解决措施,为同类废水的调试和运行提供参考.     

四川某中小城镇污水处理厂进水水质统计分析

生活污水水质对处理工艺的选择、设计参数的选取以及稳定运行十分重要。运用SPSS软件,对四川某中小城镇污水处理厂为期一年的进水指标(水量、COD、氨氮、总磷、pH、SS)进行方差和相关性分析。方差分析结果显示进水量、氨氮和SS在月份和季节之间存在显著性差异,而总磷和pH仅在月份之间存在显著差异,COD在季度和月份之间无显著性差异;指标相关性分析表明,进水量和氨氮之间呈负相关,氨氮和总磷、COD和总磷之间呈正相关,且相关性显著。在此分析的基础上对污水处理厂设计、工艺选择及运行管理提出了一些建议。     

Fouling distribution in forward osmosis membrane process

Fouling behavior along the length of membrane module was systematically investigated by performing simple modeling and lab-scale experiments of forward osmosis （FO） membrane process. The flux distribution model developed in this study showed a good agreement with experimental results, validating the robustness of the model. This model demonstrated, as expected, that the permeate flux decreased along the membrane channel due to decreasing osmotic pressure differential across the FO membrane. A series of fouling experiments were conducted under the draw and feed solutions at various recoveries simulated by the model. The simulated fouling experiments revealed that higher organic （alginate） fouling and thus more flux decline were observed at the last section of a membrane channel, as foulants in feed solution became more concentrated. Furthermore, the water flux in FO process declined more severely as the recovery increased due to more foulants transported to membrane surface with elevated solute concentrations at higher recovery, which created favorable solution environments for organic adsorption. The fouling reversibility also decreased at the last section of the membrane channel, suggesting that fouling distribution on FO membrane along the module should be carefully examined to improve overall cleaning efficiency. Lastly, it was found that such fouling distribution observed with co-current flow operation became less pronounced in counter- current flow operation of FO membrane process.     

Aerobic granules cultivated and operated in continuous-flow bioreactor under particle-size selective pressure

A novel method based on the selective pressure of particle size （particle-size cultivation method, PSCM） was developed for the cultivation and operation of aerobic granular sludge in a continuous-flow reactor, and compared with the conventional method based on the selective pressure of settling velocity （settling-velocity cultivation method, SVCM）. Results indicated that aerobic granules could be cultivated in continuous operation mode by this developed method within 14 days. Although in the granulation process, under particle-size selective pressure, mixed liquor suspended solids （MLSS） in the reactor fluctuated greatly and filamentous bacteria dominated the sludge system during the initial operation days, no obvious difference in profile was found between the aerobic granules cultivated by PSCM and SVCM. Moreover, aerobic granules cultivated by PSCM presented larger diameter, lower water content and higher specific rates of nitrification, denitrifieation and phosphorus removal, but lower settling velocity. Under long term operation of more than 30 days, aerobic granules in the continuous-flow reactor could remain stable and obtain good chemical oxygen demand （COD）, NH4^＋-N, total nitrogen （TN） and total phosphorus （TP） removal. The results indicate that PSCM was dependent on the cultivation and maintenance of the stability of aerobic granules in continuous-flow bioreactors.     

石化企业苯类物质非密闭操作过程的职业暴露分析

采用职业卫生学调查和职业暴露风险评估方法,对选定的苯类物质非密闭操作过程较集中的芳烃装置进行职业暴露分析和评估,为石化企业苯类物质的健康风险控制提供依据。     

苏州市环境空气质量自动监测信息化平台建设思路研究

随着不断增长的环境空气自动监测数据量与滞后的数据管理方式之间的矛盾日益凸显,现有的环境空气自动监测平台已出现了一定程度的滞后,逐渐不能满足基层监测部门、决策机构和社会各界的要求,亟待更新和完善。对现有环境空气自动监测业务平台建设思路加以更新和完善,有助于建设功能相对完善的新型平台,从而为环境管理和社会公众提供更为高效、便捷的数字化服务,并对政府决策和预报预警提供更为及时的技术支撑和保障。     

固定污染源废气监测工况核查重点

在多年废气固定污染源监测工作经验的基础上,对装置和设施的生产运行状态（即工况）影响固定污染源监测结果质量的因素进行了分析和总结,提出了相关的工况核查重点及方法。     

SBR处理铁路洗涤废水试验研究

铁路洗涤废水中含有的主要污染物直链烷基苯磺酸钠(LAS)是我国环境标准中第2类污染物质.目前,铁路洗涤废水的处理以物理和化学法为主,存在效果不稳定、成本较高和工艺复杂等问题,急需寻求一种适合铁路洗涤废水特点的处理工艺.用SBR小试装置进行铁路洗涤废水处理实验研究,并且投加LAS降解菌于SBR中,进行了工艺参数的确定,处理效果考察和投菌前后对比等方面的初步研究.     

循环序批式活性污泥反应器的调试及运行

介绍了循环序批式活性污泥反应器的工艺流程及设计参数、调试和运行情况,分析探讨了系统运行中出现的一些问题。稳定运行期间的检测结果表明,反应器对COD和NH3-N具有较好的去除效果,平均去除率分别达到86.2%和92.1%,但对TP的去除率有待提高。     

味精废水处理工艺改造工程

双城市某味精厂因企业扩大生产和原味精废水处理工艺设计存在问题,致使出水未能达标。在对其原有废水处理工艺进行一系列改造后,调试运行2个月,期间系统运行稳定可靠。废水中的CODCr、TN、TOC、NH4+-N去除率分别达到99.5%、98.8%、99.9%、99%以上,处理后出水优于国家《污水综合排放标准》(GB8978-1996)一级标准。