浅谈建筑施工噪声的网络化管理

通过《南宁市环境信息综合管理系统》中建筑施工噪声管理子系统的重点研究和建设,对建设施工项目审批、中午夜间施工许可登记及施工噪声投诉实时监控,加强监督,改善了管理环节,提高了管理效能,取得了良好的效果。     

Experimental Study of the Criteria of Flow Laminarization in Two-Dimensional Dense Gas Plumes

Laminarization of flow in a two-dimensional dense gas plume was experimentally investigated in this study. The plume was created by releasing CO₂ through a ground-level line source into a simulated turbulent boundary layer over an aerodynamically rough surface in a meteorological wind tunnel. The bulk Richardson number (Ri_*), based on negative plume buoyancy, plume thickness, and friction velocity, was varied over a wide range so that the effects of stable stratification on plume laminarization could be observed. A variety of ambient wind speeds as well as three different sizes of roughness arrays were used so that possible effects of roughness Reynolds number (Re_*) on plume laminarization could also be identified. Both flow visualization methods and quantitative measurements of velocity and intermittency of turbulence were used to provide quantitative assessments of plume laminarization.Flow visualization provided an overall picture of how the plume was affected by the negative buoyancy. With increasing Ri_*, both the plume depth and the vertical mixing were significantly suppressed, while upstream propagation of the plume from the source was enhanced. The most important feature of the flow revealed by visualization was the laminarization of flow in the lower part of the plume, which appeared to be closely related to both Ri_* and Re_*.Measurements within the simulated dense gas plumes revealed the influence of the stable stratification on mean velocity and turbulence intensity profiles. Both the mean velocity and turbulence intensity were significantly reduced near the surface; and these reductions systematically depended on Ri_*. The roughness Reynolds number also had considerable influence on the mean flow and turbulence structure of the dense gas plumes.An intermittency analysis technique was developed and applied to the digitized instantaneous velocity signals. It not only confirmed the general flow picture within the dense plume indicated by the flow visualization, but also clearly demonstrated the changes of flow regime with variations in Ri_* and Re_*. Most importantly, based on this intermittency analysis, simple criteria for characterizing different flow regimes are formulated; these may be useful in predicting when plume laminarization might occur.     

Three-Dimensional Modelling of Concentration Fluctuations in Complicated Geometry

The strong fluctuating component in the measured concentration time series of a dispersing gaseous pollutant in the atmospheric boundary layer, and the hazard level associated to short-term concentration levels, demonstrate the necessity of calculating the magnitude of turbulent fluctuations of concentration using computational simulation models. Moreover the computation of concentration fluctuations in cases of dispersion in realistic situations, such as built-up areas or street canyons, is of special practical interest for hazard assessment purposes. In this paper, the formulation and evaluation of a model for concentration fluctuations, based on a transport equation, are presented. The model is applicable in cases of complex geometry. It is included in the framework of a computational code, developed for simulating the dispersion of buoyant pollutants over complex geometries. The experimental data used for the model evaluation concerned the dispersion of a passive gas in a street canyon between 4 identical rectangular buildings performed in a wind tunnel. The experimental concentration fluctuations data have been derived from measured high frequency concentrations. The concentration fluctuations model is evaluated by comparing the model's predictions with the observations in the form of scatter plots, quantile-quantile plots, contour plots and statistical indices as the fractional bias, the geometrical mean variance and the factor-of-two percentage. From the above comparisons it is concluded that the overall model performance in the present complex geometry case is satisfactory. The discrepancies between model predictions and observations are attributed to inaccuracies in prescribing the actual wind tunnel boundary conditions to the computational code.     

新世纪如何加强思想道德建设的几点思考

如何加强思想道德建设,文章认为应确立新的道德价值观、继承发扬传统道德精华,准确把握新时期的道德原则、道德建设的基本结构与目标,同时切实抓好思想道德教育,实行综合治理.     

中国城市建设用地集聚对利用效率的影响:机理、空间效应与分群差异

为探究城市建设用地集聚对城市建设用地利用效率的作用机理,文章基于2003—2017年中国278个地级及以上城市面板数据,通过构建多产出随机前沿生产函数模型测度城市建设用地利用效率,采用时间-空间双固定的空间杜宾模型探讨了不同程度的城市建设用地集聚对利用效率的影响机理与差异。结果表明:(1)从时空特征上来看,样本考察期内中国城市建设用地利用效率总体上呈稳步提升趋势,东部城市建设用地效率最高,西部次之,中部最低。(2)从全国维度的空间计量模型回归结果来看,城市建设用地集聚所带来的规模效应和外溢效应对城市建设用地利用效率具有改进作用,有利于利用效率进一步提升。(3)从不同城市建设用地集聚度分群回归结果来看,高集聚城市(东部发达地区)的直接效应显示随着城市建设用地集聚度的提高,利用效率也不断提高;间接效应中,建设用地集聚度的提高对周边城市的利用效率产生先带动后抑制的"倒U"形作用。低集聚城市(中西部欠发达地区)的直接效应和间接效应均显示,随着城市建设用地集聚的提高,其利用效率存在"先降后升"的"U"形曲线特征。可见,在城市发展的不同阶段,城市建设用地集聚对城市土地利用效率存在差异化影响。因此,中国城市发展应立足当前发展阶段特征,制定差别化的供地政策,促进城市建设用地集聚,针对性地提升区域要素利用效率,支撑经济社会进一步发展。     

我国环境监测方法标准体系现状分析及建设思路

对中国环境监测方法标准技术体系发展进程、现状进行了研究,分析了中国现有的环境监测方法标准体系中存在的问题和不足。结合当前新环保法实施对环保标准工作的形势要求,针对中国环境监测方法标准体系的特点,提出了"十三五"期间建设完善环境监测方法标准体系的探讨性建议。     

建设项目竣工验收现场平行样控制指标研究

依据建设项目竣工环境保护验收中污水监测的要求,通过积累大量验收监测质量检查的实验数据,运用数理统计的方法,以化学需氧量和氨氮两个项目为例,建立了质控数据的评价方法,并确定了现场平行样偏差指标的限値。     

构建覆盖国家环境监测网的质量控制体系

"十二五"期间,中国将全面完成国家环境监测网的布局与建设,环境管理将开始由以环境污染控制为目标导向,向以环境质量改善为目标导向转变,以全面考核空气、水环境和土壤等环境质量的新环境管理时代即将来临。从现有环境监测质控体系所发挥的作用、存在的问题以及环境管理的需求出发,提出构建覆盖国家环境监测网的质量控制体系,论述各级环境监测站的质控职责,尤其是省级监测站作为地区质量控制中心,应该和国家站一起加大自身质控能力建设,为提高环境监测数据的可信度做好质控工作。     

污染源监督性监测数据元的构建研究

系统梳理了污染源监督性监测数据元的研究现状,提出了污染源监督性监测数据元的构建过程和体系指标,为制定污染源监督性监测数据元技术标准提供技术支持。通过污染源监督性监测数据元的构建,建立监测数据共享和应用的长效机制,实现污染源监督性监测信息的规范管理、交换与共享,为各级环保部门加强对污染源的监管和政府决策提供强有力的技术支持。     

石化行业给排水系统设计图纸环境监理审查要点

石化行业废水种类多样、毒性较大,给排水系统的设计会直接影响石化项目建成后周边地表及地下水环境质量。设计文件的环保审查是环境监理的重要依据之一,其中,相关的设计图纸对下一步建设工作具有指导作用,是所有施工单位的施工依据。以某石化行业为例,对给排水系统设计文件的收集进行了分析,并根据设计图纸环保审查中存在的问题,对环境监理如何提高在设计会审中的作用,设计阶段如何对设计图纸进行审查以及审查的重点内容等进行了阐述。