有机废物厌氧消化工艺应用现状及前景展望

与其他常规处理方法相比,利用厌氧消化技术处理有机废物更具有优嚏,因为它不仅可以有效减少污省染,还可以产生很好的经济效益和巨大的环境效益。简要介绍了厌氧消化技术的机理、影响因素、类型,以及在有机废物处理领域的应用现状,并重点介绍了国外近年来发展形成的典型厌氧消化工艺,同时分析了厌氧消化技术在有机废物资源化处理领域的广阔应用前景。     

杂质对废塑料裂解产物及污染物排放的影响

从垃圾中分选出的废塑料混有大量杂质,杂质对现有废塑料裂解工艺有直接的影响.针对这一问题,对混有厨余、纸、织物和渣土等杂质的废塑料裂解产物和污染物排放进行了研究.同时检测和分析了厨余、纸、织物和沙土等常见杂质所含N、Cl、S元素向裂解油、裂解气中的迁移规律.研究表明,厨余的混入将对裂解油的产物产生严重不利影响,如热值降低至27 MJ/kg,油品的含水率高达25%以及多环芳烃含量大大提高,因而应在分选过程中除去.厨余、织物和纸张等杂质的混入导致裂解气体中污染物浓度的显著上升.渣土的混入对气体产物有有利影响,对油品无明显不利影响.     

A discussion to promote global sustainability techniques for motivating plastic waste to minimize carbon footprints

This paper emphasizes the significant challenges facing the sustainable environment, including managing and handling plastic waste and reducing carbon footprints. To tackle these challenges, it is essential to identify people's awareness levels of waste handling techniques and their pro-environmental behaviors. The study focuses on Guwahati, one of the most important cities in Northeast India, which generates increasing plastic waste daily. The paper aims to identify the factors contributing to the reduction of carbon footprints resulting from plastic waste management activities. The data collected from 1326 respondents was analyzed using factor analysis, and the reliability of the dataset was confirmed using Cronbach's alpha (0.84 for the awareness level of waste management techniques and 0.780 for the prevalent mode of plastic waste management techniques). KMO (0.796), Bartlett's test of sphericity (p < 0.001), and determinant score (0.019) were used to assess the data adequacy and factorability of the dataset, and the results were found to be satisfactory. Principal component analysis, exploratory factor analysis, and varimax orthogonal rotation method were used to identify high-loaded factors by reducing the number of variables. The results showed that two highly loaded components, namely awareness level of waste management techniques (AWMT) and prevalent mode of plastic waste management techniques (PWMT), explained 27.53% and 24.34% of the total variance, respectively, with eigenvalues of 3.35 and 2.88. The regression model confirmed the statistical significance of these factors (p < 0.001) and their relationship with the dependent variable, greenhouse reduction (GHGR). The study proposes that minimizing carbon footprints in the environment can be achieved by focusing on a limited number of controllable factors such as AWMT and PWMT. This study provides valuable insights to the authorities in controlling waste generation and achieving a pollution-free environment.     

中药工业废水处理研究进展

概述了目前中药工业废水处理应用的各种物化、生物处理技术;对主要处理工艺的应用特点进行了论述;指出了中药工业废水处理技术今后的研究开发方向和思路。     

Facilitating substance phase‐out through material information systems and improving environmental impacts in the recycling stage of a product

The amount of electrical and electronic products is increasing rapidly, and this inevitably leads to the generation of large quantities of waste from these goods. Some of the generated e‐waste ends up in regions with sub‐standard recycling systems and may be processed under poor conditions. During uncontrolled incineration, halogenated dioxins and furans can be generated from brominated and chlorinated compounds in the products. In order to reduce the health and environmental risks involved in the recycling stage of the life cycle of electronics, an effective design‐for‐environment process must be established during the product development phase. Knowledge of the chemical substances in the product is crucial to being able to make informed decisions. Through full knowledge of the material content of procured components, phase‐outs of unwanted substances, such as halogenated substances, can be performed in an effective manner. Therefore, information is the key to success in phasing‐out substances; facilitating compliance of legal provisions for manufacturers of electrical and electronic devices; and improving the environmental footprint of products as they reach the end of the life cycle. After an introduction to the challenges of electronics waste management, this paper describes supply chain information systems and how they are used to facilitate substance phase‐outs in the electronics industry. Sony Ericsson has been working with phase‐outs of unwanted substances since it was founded in 2001. Through the introduction of a material declaration system that keeps track of all substances in the components used in the company's products, Sony Ericsson has been able to replace unwanted substances to improve environmental impacts at the recycling stage of a product.     

新疆乡镇企业经济与生态环境保护协调发展战略的探讨（二）

文中论述了新疆地区乡镇企业发展与生态环境有关的产业结构特点和分布,分地区、分行业计算了乡镇工业1985—1988年的“三废”污染和生态破坏状况,并对1995年和2000年“三废”污染控制数量及生态—经济规划指标作了综合评述。提出了新疆乡镇企业经济与生态环境保护协调发展战略的主要对策和建议。     

基于剩余污泥的超声法提取微生物絮凝剂

通过超声系列实验,对超声法从剩余污泥中提取微生物絮凝剂(MBF)进行了系统研究。从剩余污泥中提取的MBF在碱性条件下表现出较好的絮凝活性。提高污泥浓度有利于提取出较高絮凝活性的MBF。由于超声波的破解作用,超声频率或功率过高均不利于MBF的提取。在20 kHz的超声频率下,连续超声比脉冲为1、4或8 s超声时的提取效果均要好。经过工艺优化,采用20 kHz、120 W的超声波对剩余污泥(19.4 g/L)连续超声30 s,所提取的MBF对高岭土悬浊液的絮凝率接近70%。结果表明,超声法可用于从剩余污泥中直接提取MBF,在降低MBF生产成本的同时实现污泥的资源化利用。     

城市生活垃圾和污水处理厂剩余污泥混合发酵的原料配比优化研究

以城市生活垃圾和污水处理厂的剩余污泥为混合原料,研究了混合原料的不同配比对厌氧发酵过程及产气的影响。结果表明:城市生活垃圾与剩余污泥以挥发性固体(VS)质量比为2∶1混合后,厌氧发酵效果最好,累计产气量最高,达到8 721mL,发酵后的总固体(TS)、VS、COD去除率分别达43.65%、35.98%、47.88%;各实验组在发酵过程中的pH、氨氮浓度和碱度均在合理范围内,未对厌氧发酵反应造成影响;以适当配比的城市生活垃圾和剩余污泥为混合原料,进行中温联合厌氧发酵是可行的,联合厌氧发酵可以弥补单一原料的缺陷,在一定程度上改善厌氧发酵效果。     

废弃硅钼棒循环再利用制备MoSi2 基抗氧化涂层

目的在实现钼资源循环再利用的同时,提高钼合金高温抗氧化性能。方法将废弃硅钼棒破碎、球磨制成粉末,并结合玻璃粉和硅粉作为原料,采用浆料法在钼基体上制备MoSi_2基抗氧化涂层。通过扫描电子显微镜、X射线衍射和1400℃静态等温氧化实验等分析涂层的微观组织、结构及抗氧化性能。结果制备的MoSi_2基抗氧化涂层厚度约500μm,涂层整体上呈现出相对致密的结构。在1400℃氧化20h后,涂层质量增量为5.88 mg/cm2,呈现出较好的防氧化效果。结论利用浆料法,以废弃硅钼棒为原料,在实现钼资源回收再利用的同时,为钼合金表面制备具有较好抗氧化性能的MoSi_2基抗氧化涂层。氧化过程中,涂层在表面形成了一层致密的SiO2玻璃,具有较强的阻氧能力,减少氧气向基体的渗入,可以在高温氧化环境有效提升钼基体的抗氧化能力。     

Removal of high concentrated ammonia nitrogen from landfill leachate by landfilled waste layer

The landfill of municipal solid waste(MSW) could be regarded as denitrification reactor and involved in ammonia nitrogen biological removal process. In this research, the process was applied to municipal solid waste collected in Shanghai, China, which was characterized by high food waste content. The NH4^ removal efficiency in the system of SBR nitrifying reactor followed by fresh and matured landfilled waste layer in series was studied. In the nitrifying reactor, above 90% of NH4^ in leachate was oxidized to NO2^- and NO3^- . Then high concentrated NO2^- and NO3^- were removed in the way of denitrification process in fresh landfilled waste layer. At the same time, degradation of fresh landfilled waste was accelerated. Up to the day 120, 136.5 gC/(kg dry waste) and 17.9 gN/(kg dry waste) were converted from waste layer. It accounted for 50.15 % and 86.89 % of the total carbon and nitrogen content of preliminary fresh waste, which was 4.42 times and 5.17 times higher than that of reference column respectively. After filtering through matured landfilled waste, BOD5 concentration in leachate dropped to below 100 mg/L, which would not affect following nitrification adversely. Because the matured landfilled waste acted as a well methanogenic reactor, 23% of carbon produced accumulatively from fresh landfilled waste degradation was converted into CH4.