Developing Canada's National Forest Carbon Monitoring, Accounting and Reporting System to Meet the Reporting Requirements of the Kyoto Protocol

The rate of carbon accumulation in the atmosphere can be reduced by decreasing emissions from the burning of fossil fuels and by increasing the net uptake (or reducing the net loss) of carbon in terrestrial (and aquatic) ecosystems. The Kyoto Protocol addresses both the release and uptake of carbon. Canada is developing a National Forest Carbon Monitoring, Accounting and Reporting System in support of its international obligations to report greenhouse gas sources and sinks. This system employs forest-inventory data, growth and yield information, and statistics on natural disturbances, management actions and land-use change to estimate forest carbon stocks, changes in carbon stocks, and emissions of non-CO₂ greenhouse gases. A key component of the system is the Carbon Budget Model of the Canadian Forest Sector (CBM-CFS). The model is undergoing extensive revisions to enable analyses at four spatial scales (national, provincial, forest management unit and stand) and in annual time steps. The model and the supporting databases can be used to assess carbon-stock changes between 1990 and the present, and to predict future carbon-stock changes based on scenarios of future disturbance rates and management actions.     

Carbon Dioxide Balance of Wood Substitution: Comparing Concrete- and Wood-Framed Buildings

In this study a method is suggested to compare the net carbon dioxide (CO₂) emission from the construction of concrete- and wood-framed buildings. The method is then applied to two buildings in Sweden and Finland constructed with wood frames, compared with functionally equivalent buildings constructed with concrete frames. Carbon accounting includes: emissions due to fossil fuel use in the production of building materials; the replacement of fossil fuels by biomass residues from logging, wood processing, construction and demolition; carbon stock changes in forests and buildings; and cement process reactions. The results show that wood-framed construction requires less energy, and emits less CO₂ to the atmosphere, than concrete-framed construction. The lifecycle emission difference between the wood- and concrete-framed buildings ranges from 30 to 130 kg C per m² of floor area. Hence, a net reduction of CO₂ emission can be obtained by increasing the proportion of wood-based building materials, relative to concrete materials. The benefits would be greatest if the biomass residues resulting from the production of the wood building materials were fully used in energy supply systems. The carbon mitigation efficiency, expressed in terms of biomass used per unit of reduced carbon emission, is considerably better if the wood is used to replace concrete building material than if the wood is used directly as biofuel.     

碱性物质中和法在处理煤矿废水中的应用

凡是有地下煤矿开采的地区,都伴之有地下水排放.在面临全球性淡水缺乏的形势下,煤矿排放废水却作为污染源,日夜注入河床,致使环境保护部门为之大伤脑筋,而且各煤矿也为煤矿排放废水的治理,付出了很大的经济代价.因此如何解决煤矿排放废水达标排放的问题,使其能作为矿产资源和水资源得到再利用,解决即将到来的水荒危机就成为了本文讨论的重点.     

谈双鸭山市气象特征及地形特征对空气质量的影响

双鸭山市采暖期污染较重是因为采暖期燃煤量大、低矮分散的面源多的缘故,同时气象因素及地形特征对空气质量的影响也起着相当大的作用,采用2005年空气质量监测数据,进行双鸭山市气象特征及地形特征对空气质量影响分析,得出空气较稳定的取暖期和具有山风、谷风、局地环流的地形特征是形成双鸭山市空气污染的主要原因之一,并针对地形特征及气象特征对双鸭山市空气质量的影响提出空气污染治理措施.     

阳极溶出伏安法连续测定底泥中的总镉和总铅

底泥样品经盐酸-硝酸-氢氟酸-高氯酸消解后,用1 1盐政溶解残渣,以高氯酸做支持电解质,采用阳极溶出伏安法的标准加入法,连续测定样品中的总镉和总铅.该方法测定土壤标准样品中镉和铅的相对标准偏差分别为5.6%和4.6%,相对误差分别为2.4%和～1.7%;测定自采底泥样品中镉和铅的相对偏差分别为7.7%和8.1%,方法的重复性好;测定土壤标准样品中镉加标回收率为94.0%～106.8%,铅加标回收率为95%～103.8%;自采样品中镉加标回收率为93.0%～105.6%,铅加标回收率为90.0%～105.0%,方法的准确度较高.实验中,镉和铅的半波电位稳定,峰形对称.     

氨法烟气脱硫脱硝的技术特征

氨法烟气脱硫脱硝具有显著的技术优势:脱硫效率高,脱硫脱硝一举两得,不耗费热量不产生废渣,脱硫剂利用充分用量小,不损害设备有节能功效。脱硫剂利用率可达90%以上,脱硫效率可达90%以上、脱硝效率可达80%以上;脱硫剂用量是钙法工艺的十到二十分之一;副产物为可以直接利用的化学肥料,而非难于处置的废渣。     

应用被动扩散管监测分析葫芦岛市环境空气NO2时空分布特征

被动扩散技术以其低成本、操作简单、空间覆盖率较高等优点已在西方国家广泛应用于环境空气质量监测与调查,辽宁省环保局通过欧盟项目引进,本技术在葫芦岛市环境空气质量监测应用有4年时间.依据4年环境空气被动扩散管监测基础数据,分析了解葫芦岛市城区大气中NO2时空分布特征:高浓度值出现在交通区,季节上呈现春季明显低于其它季节.     

复合催化氧化技术对油气田压裂返排液的处理研究

酸化压裂作业废水是石油天然气生产过程中的主要污染源,它的污染成份复杂,有害物质浓度高,特别是含有胍胶和表面活性剂等高分子物质,具有高COD、高稳定度、高粘度的特点.本文通过对压裂液的来源、水质特征、治理现状等常用方法的分析,确定了物理化学脱稳,过滤、O3/H2O2复合催化氧化、深度氧化的达标治理工艺路线.经过处理后的压裂液澄清透明,达到国家二级排放标准(GB8978-96).     

铜铁矿井下采掘工程的环境影响及生态保护

对铜铁矿井下采掘工程产生的环境影响进行了分析，外排井下涌水下的铜可对鱼类养殖业水体的地表水质带来不利影响，采用帷幕注浆堵水工艺可防止大面积地表塌陷的发生，对难以避免的局部，小规模塌陷提出了生态安全的预警措施。     

垃圾转运站污水回用处理工艺设计

垃圾转运站污水回用处理采用了膜 -生物反应器处理工艺 ,它具有高效、稳定、工艺流程简单、设备占地面积小和投资少等优点 ,且处理后出水可用于自身站内所需 ,即冲车、喷洒道路、冲厕、绿化、冲刷车间地面等多种用途 ,实现了污水处理后再利用的目的。