高性能纤维在软质防弹服材料中的应用

高性能纤维具有优异的理化性能,在个体防护领域有着广泛的应用。本文介绍了高性能纤维在软质防弹服领域的应用与发展,分析了其优点与缺点,并讨论了软质防弹服发展方向。     

Physical and motor development in male and female rat offspring prenatally exposed to gamma radiation

Abstract

The effects of radiation on physical and motor development of male and female rats exposed to ionizing radiation in utero were studied. Rats were exposed to three different doses of radiation (150 rad, 15 rad and 6.8 rad, considered as high, moderate and low doses of radiation respectively) on the 20th day of prenatal life. Exposure to 150 rad contributed to significantly lower body weights of both male and female rat offspring. Upper jaw tooth eruption was delayed in 150 rad treated male offspring, as well as in 15 rad and 150 rad treated female offspring. Cliff‐avoidance response was delayed in 6.8 rad, 15 rad, and 150 rad treated male offspring; and 150 rad treated female offspring. Lower jaw tooth eruption, eye opening, and crawling were not affected by radiation in male or female animals. Results indicate that radiation affected the developmental parameters of both male and female rat offspring, and sex of the offspring played no role in the magnitude of radiation induced damages.     

地质灾害能量质环理论结构模式梗概

以地质灾害能量形成致灾根源为研究导向,论表观灾害形成机理的基础上,从灾害能量质环理论到地质灾害致灾根源作进一步升华探索.运用能量质环理论有针对性地加强对于地震、洪水、泥石流等各种地质灾害能量在介质中传播规律的研究；构建灾害能量传输、聚集成无数能量质点、质点相吸形成环链、环链相交形成能量断面,各个能量断面叠加形成能量破坏体,能量破坏体不断地传输与演化直至最终诱发下一次灾害等全过程循环系统；分析灾害能量在介质中传输及演变规律；提出灾害隔断原理,对防灾减灾工程提出实质性的建议.该项目研究打破了传统的非根源防灾理念,从致灾根源探索灾害的形成及灾害隔断预警.     

长期低强度曝气技术处理黑臭水体的可行性研究

为在保持曝气复氧技术优点的同时,通过控制曝气强度以节约曝气能耗,较大幅度地降低运行成本,拓展其应用范围,提出了1种长期低强度曝气处理黑臭水体的河道复氧技术。取用上海市徐汇区新港河水为实验用水,通过长期低强度曝气与连续曝气,间歇曝气的比较实验,结果表明,低强度曝气技术消除河道黑臭是完全可行的,同时还能有效去除水体污染负荷。实验中,氨氮去除率90%以上时,低强度曝气所消耗能源仅为连续曝气的10.52%和间歇曝气的25%,可节约大量的能源。     

Identification of Ergonomic-Related Hazards in an Industrial Sample Using the National Occupational Exposure Survey

The National Occupational Exposure Survey (NOES) was used to determine probabilities for 4 potential physical-agent and 10 potential ergonomic-related exposure hazards among a representative sample of U.S. industries. Potential physical-agent hazard exposures, principally whole-body and segmental vibration, were highest among railroad and heavy construction industries. Several construction industries had high probabilities of potential ergonomic-related exposure hazards, especially to the back and upper extremities.

Establishments with 100 to 249 employees had the highest probability of potential exposures to the 2 types of hazards. Measures of safety and health climate did not differ consistently between high-hazard and low-hazard establishments. The approach taken in this paper may be used to help identify highrisk industries, evaluate interventions, and develop inspection strategies.     

Environmental whole farm management plans: their character, diversity, and use as agri-environmental indicators in New Zealand

This paper reports on a nationwide survey of environmental farm plan programmes and plan characteristics, towards determining New Zealand's (NZ's) capability and eligibility for reporting on the Organisation for Economic Cooperation and Development's (OECD) environmental whole farm management plan agri-environmental indicator. Considerations regarding the validity of the indicator are discussed. Environmental farm planning in NZ is widespread, fragmented, and diverse. Nine of NZ's 16 regional authorities have environmental farm plan programmes involving 20 different types of environmental farm plans. Potentially half of NZ's total area of farmland is included, but this is reduced by limited and selective use of environmental farm plans as policy instruments. Three authorities are capable of readily reporting the number and coverage of their environmental farm plans; six would need to manually compile the information. Compliance monitoring is mostly informal, but necessary for checking the implementation of plan works and actions. Eligibility of NZ environmental farm plans cannot be determined until the OECD define acceptance standards. A contemporary definition of environmental farm plans is proposed, along with additional criteria necessary to ensure such plans are credible indicators of issue ownership, adoption of best management practice, and landscape changes intended to improve environmental quality.     

异形电极调控的体声波谐振器力–电多场耦合仿真与优化

目的 抑制压电薄膜体声波谐振器(FBAR)寄生振动模态干扰,提出一种异形电极调控的谐振器新结构,并进行力–电多物理场耦合有限元建模分析与参数优化。方法 基于压电薄膜体声波谐振器的力–电耦合方程,运用有限元方法进行参数影响仿真分析,获得不同电极结构形状与敏感几何参数对应的谐振器阻抗特性及寄生振动模态干扰的影响规律,并对提出的异形电极调控谐振器几何参数进行优化。结果 新型电极结构使得薄膜体声波谐振器的导纳特性曲线更加平滑,相位波纹减少,无明显寄生谐振峰。参数优化所得框状电极宽度为6 μm、厚度为0.1 μm,谐振频率为1.727 GHz。结论 通过异形电极结构形状设计,可以实现对谐振器寄生振动模态的有效抑制,提升谐振器的性能。     

典型仪器支架动力学管控方法研究

航天工程中普遍采用支架进行设备的安装,但是支架对振动环境的严重放大会影响设备的工作可靠性,给飞行器飞行带来极大隐患,需要开展典型支架的动力学管控方法研究。提出面向支架动特性管控的动力学特性指标,可以全面表征仪器支架在随机振动激励下的动力学特性,并可据此构造优化目标,以对支架动力学特性进行有效管控。提出典型仪器支架的动力学管控方法,实现了将支架动特性设计融入支架结构设计流程中。针对一种典型的仪器支架开展了随机振动试验与有限元仿真分析,验证了随机振动响应预示方法的准确性,并以此为基础,对其进行了动力学管控。以某型支架为对象开展的动力学管控,将支架上相对安装基础的振动量级放大倍数从4.2降低到1.67。结果表明,提出的典型仪器支架动力学管控方法可在研制初期改善仪器支架的动力学特性,对提高飞行器可靠性和环境适应性具有重要意义。     

舱门振动对舱室噪声特性影响研究

目的研究舱门结构振动特性对舱室声场特性的影响与控制方法。方法基于声固耦合分析方法,对典型舱门结构的振动声辐射特性进行仿真分析,研究材料、板厚以及阻尼层对舱门结构声辐射特性的影响规律。建立舱室声学分析模型,分析舱门结构振动对舱室声学环境的影响。结果计算了典型舱门结构的固有频率和声辐射特性,舱门结构在固有频率处容易辐射出较大的噪声能量。通过分析舱室典型位置声压频率响应可知,声压峰值频率以舱室模态频率为主,且响应最大值出现在舱门结构频率和舱室模态频率重合处。仿真分析结果显示,采用在舱门表面增加约束阻尼层的降噪方法,可以有效降低舱室噪声。结论舱门结构振动模态频率与舱室声学模态频率的重合产生较大的共鸣噪声。在舱门上增加约束阻尼层是一种简易且有效的舱室噪声控制措施。     

基于平均法的金属橡胶隔振器非线性振动特性研究

目的研究金属橡胶隔振系统的非线性振动特性和机理。方法建立该金属橡胶隔振系统的非线性动力学模型,利用平均法推导出系统的自由振动运动方程和在简谐激励下的受迫振动幅频响应方程,通过数值计算分析影响隔振系统位移传递率的因素。随后设计一种结构紧凑的金属橡胶隔振器,通过静压试验得到加载卸载迟滞回线,利用拟合方法建立金属橡胶的指数型刚度模型。该模型在相同拟合效果下参数较少,将指数型非线性刚度模型代入到振动方程中进行求解,得到理论幅频响应曲线。同时,进行金属橡胶隔振系统的正弦扫频试验,得到不同振动幅值下的实测传递率幅频响应,与理论计算结果进行对比。结果拟合参数与系统的振动特性相关,拟合参数k_(1)越大,系统共振频率越低,拟合参数k_(2)越大,系统共振频率越高。理论计算与试验结果共振频率的误差最大为2.1%,放大倍数最大误差为17.1%。该理论方法可以较为准确地计算出隔振系统的共振频率、共振放大倍数以及非线性振动的跳跃现象。结论该方法可以较为准确地通过金属橡胶隔振器的静压试验数据预估出金属橡胶隔振系统的非线性振动特性,对于金属橡胶隔振设计具有一定的应用价值。