Treatment of tunnel wash waters – experiments with organic sorbent materials. Part II: Removal of toxic metals

In the first part of the article, the column and the bag experiments concerning removal of polycyclic aromatic hydrocarbons (PAHs) and nonpolar oil (NPO) from tunnel wash waters using organic sorbent materials have been described. This part presents the results of removal of toxic metals. The metals of concern (Al, As, Cd, Cr, Cu, Fe, Pb, Mo, Ni, and Zn) were selected based on the priority toxicant pollutants defined in surface water quality criteria. Concentrations of these metals in the collected effluent...     

武器装备电磁兼容性预测试技术初探

阐述了电磁兼容性(EMC)和电磁兼容测量的基本概念,通过分析EMC认证测试与EMC预测试的特点,总结了EMC预测试的优点.EMC预测试分为指标性预测试和故障诊断预测试.以一些EMC测试项为例,详细描述了这两种预测试的测试方法,最后简述了对电磁兼容性设计的整改措施.     

Feasibility analysis of renewable hybrid energy supply options for Masirah Island

In this paper, the assessment and modelling of alternative renewable energy systems for Masirah Island is considered. The hybrid system that is simulated comprises various combinations of wind turbines and/or photovoltaic (PV) supplemented with diesel generators and short-term battery storage. It was found from the analysis that the PV–wind–diesel hybrid system, with battery unit, has the lowest cost values as compared to solar-only or wind–diesel hybrid systems. Furthermore, the study illustrates that for a given hybrid system the presence of battery storage will reduce diesel consumption. The decrease in carbon emission, the percentage of fuel savings, the cost of energy production and the effect of wind and PV penetration are also addressed in this paper. The PV–wind–diesel hybrid option is techno-economically viable for the electrification of the Masirah Island.     

Renewable energy potential in India and future agenda of research

ABSTRACT

Demand of electrical energy is exponentially increasing causing environmental problems due to extensive use of fossil fuels. Hence, research has been promoted in renewable energy technologies to mitigate environmental pollution. Indian subcontinent is rich in renewable energy sources (RES). This paper describes potential of RES and region-wise installed capacity in India. Estimated potential of RES is 57 GW which is targeted to be 175 GW by 2022. A logical framework for our future research work has been presented. This includes performance optimisation of solar pumping system and reliability assessments of the designed system using reliability indices.

Abbreviation: RES: Renewable energy resources; SHP: small hydro plants; GOI: Government of India; MNRE: Ministry of New and Renewable Energy; LHP: large hydropower; BCM: billion cubic metres; PEC: per-capita energy consumption; JNNSM: Jawaharlal Nehru National Solar Mission; DNI: direct normal irradiance; SPV: solar photovoltaic; UMPP: ultra mega green solar power project; GIS: geographic information systems; WMS: wind monitoring stations; MPWL: Madhya Pradesh windfarms Ltd.; MIB: mat river basin; SWAT: Soil and Water Assessment Tool; ROR: run of river; SMS: short message service; CDM: clean development mechanism; NIOT: national institute of ocean technology; LOLP: loss of load probability; CSO: Central Statistics Office; CEA: Central Electricity Authority; TERI: The Energy and Resources Institute; WPI: Wind Power India; IEA: International Energy Agency; EAI: Energy Alternatives India; BKP: Biomass Knowledge Portal; IRENA: International Renewable Energy Agency; GAIN: Global Agricultural Information Network; NITI: National Institution for Transforming India; NIWE: National Institute of Wind Energy; UP: Uttar Pradesh; J&K: Jammu and Kashmir; HP: Himachal Pradesh; NR: northern region; MP: Madhya Pradesh; WR: western region; TN: Tamil Nadu; AP: Andhra Pradesh; SR: southern region; ER: eastern region; NER: north eastern region; A&N: Andaman & Nicobar     

Intelligent power supply management of an autonomous hybrid energy generator

ABSTRACT

This work deals with the optimization of an hybrid energy system used to supply an isolated site. The proposed system combines a wind turbine, a photovoltaic panel, a diesel generator and a battery bank to electrify atypical home. An energy cost-effectiveness approach is adopted in accordance with meteorological data, time profile of energy consumption, and the cost of different alternative systems. A variety of performances is obtained through simulations within the Homer Pro environment. The selection of an optimal combination is based on the maximum integration of renewable energy in the suggested system with a minimum of gas emission. According to the obtained results, the overall cost of the selected installation is about 72,900 €, with 0.415€ the unit cost of a kWh electric energy provided with a contribution of renewable energy of around 86%. Simulations show a technical and financial benefits of the different configurations obtained to supply the target site. To control the proposed hybrid energy system, a supervision algorithm is developed and implemented on TMS320F28027 DSP platform. The proposed energy system aims to take advantages of renewable energy sources and shift to conventional sources only when necessary in order to ensure source autonomy and service continuity.     

环境审计制度选择影响因素的实证分析

随着环境问题的日益严重,污染治理工具的选择和实施成为社会各界普遍关注的焦点.本文选择150个国家的国别数据,采取logit模型对环境审计制度选择的影响因素进行分析.研究结果表明,经济发展水平、环境保护投资和社会信息化程度与一国是否开展环境审计成显著正相关;审计体制对环境审计的开展也具有显著性影响;而污染排放现状、邻国的决策对环境审计制度选择的影响并不显著.本文的研究表明,与传统命令——控制型规制工具的普适性不同,作为一种信息化的污染治理工具,环境审计是经济社会发展到一定阶段国家最高审计机关的选择.进一步,利用我国2007年-2011年的相关数据进行基于主成分回归的符合性检验,结果显示环境审计的概率值p皆高于50％,且逐年递增,表明我国现阶段实施环境审计的条件和时机已经基本成熟.本文的研究发现为我国最高审计机关“十二五”期间将环境审计作为一种独立的审计类型,在全国推行环境审计工作提供了理论依据.     

风蚀扬尘抑尘剂效率测试方法与应用

风蚀扬尘抑尘剂是一种控制风蚀扬尘的有效措施,探讨使用便携式风洞(PI-SWERL)测试风蚀扬尘抑尘剂效率的方法,并对比国内外2种抑尘剂对风蚀扬尘PM2. 5的抑制效率,以研究喷洒方式、稀释倍数和风速对抑尘效率的影响.结果表明:①按照推荐的稀释倍数分别配置G和Enviroseal(ES)抑尘剂水溶液并测试,液滴喷洒方式对应的抑尘效率优于雾化喷洒方式,在17. 2 m·s~(-1)(相当于8级风)风速时G抑尘剂效率(99. 5%)优于ES抑尘剂(94. 0%)和水(77. 5%);②对稀释倍数为50、100、150、200和400倍的G抑尘剂进行测试,在17. 2 m·s~(-1)风速时,抑尘效率分别为99. 7%、99. 5%、99. 7%、98. 1%和95. 9%,可根据抑尘效率变化拐点确定抑尘剂最佳成本效益稀释倍数;在13. 1～17. 2 m·s~(-1)风速范围内,抑尘效率随风速增加而增加.③使用便携式风洞测试风蚀扬尘抑尘剂效率的方法,可以量化抑尘剂对风蚀扬尘PM2. 5的抑制效率,建议对风蚀扬尘抑尘剂开展抑尘有效期和环境友好性测试.     

Quantification of uncertainty of experimental measurement in leaching test on cement-based materials

When mineral wastes are reused in construction materials, a current practice is to evaluate their environmental impact using standard leaching test. However, due to the uncertainty of the measurement, it is usually quite difficult to estimate the pollutant potential compared to other materials or threshold limits. The aim of this paper is to give a quantitative evaluation of the uncertainty of leachate concentrations of cement-based materials, as a function of the number of test performed. The relative standard deviations and relative confidence intervals are determined using experimental data in order to give a global evaluation of the uncertainty of leachate concentrations (determination of total relative standard deviation). Various combinations were realized in order to point out the origin of large dispersion of the results (determination of relative standard deviation linked to analytical measured and to leaching procedure), generalisation was suggested and the results were compared to literature. An actual example was given about the introduction of residue (meat and bone meal bottom ash--MBM-BA) in mortar, leaching tests were carried out on various samples with and without residue MBM-BA. In conclusion large dispersion were observed and mainly due to heterogeneity of materials. So heightened attention needed to analyse leaching result on cement-based materials and further more other tests (e.g. ecotoxicology) should be performed to evaluate the environmental effect of these materials.     

可靠性增长摸底试验方法研究分析

介绍了可靠性增长摸底试验方法的适用范围,对其试验对象进行了探讨,并对如何确定最佳试验时间的两种方法进行了研究.分析指出试验应力的选取也是影响可靠性增长摸底试验效果的关键因素,并用具体试验方案举例说明其有效性,证明了开展可靠性增长摸底试验这项工作可达到快速有效、节约经费的作用.     

大空间建筑烟气填充研究方法的对比

为了对大空间建筑烟气填充研究方法进行对比分析。以一个废弃的大空间仓库为研究对象,采用了全尺寸火灾实验、计算机数值模拟和理论分析相互应用验证的研究方法,研究理论及数值模拟两种火灾烟气层高度的描述方法的准确性。结果表明当采用t2火模型时,在与现实的吻合程度方面,数值模拟〉Zukoski理论模型〉Yamana-Tanaka理论模型;随着火灾的不断发展,相对误差逐渐增大。通过对比分析发现,全尺寸实验、理论模型和数值模拟三种方法相互验证可以更好地保证研究的准确性;总结得到了两种与现实较吻合的描述烟气层高度的理论方法,并且提出减小误差应注意的几点事项,包括尽可能提高火源热释放速率、烟气层温度描述的准确性;不考虑火源热量通过建筑边界结构散失等。