一种高柔结构的减震装置

介绍了国内外高柔结构减震装置的研究现状，提出了一种新的高柔结构减震装置，并对该装置进行了原理分析和计算。为了检验该高柔结构减震装置的减震效果，在大型结构振动台上进行了模型试验，实验结果表明，由于减震装置的约束作用，增加了系统的刚度，系统共振频率略有增大，该减震装置具有明显的减震效果。最后，对该减震装置在灾害救生方面上的应用前景进行了展望。     

建筑风载数值模拟的影响因素

通过对建筑物周围风场的计算流体动力学(CFD)模拟计算与原型试验结果的比较,分析了在应用CFD计算时应该考虑的计算区域、进口边界条件、湍流模型和网格划分等各种相关因素对CFD数值模拟结果准确度的影响.结果表明,在各种影响因素中,计算区域影响相对较小,而进口边界条件、网格划分和湍流模型的影响相对较大;而且进口边界条件中速度分布对计算结果的影响大于湍流强度分布对计算结果的影响,是进口边界条件中的关键部分.同时,根据上述比较,建议在网格划分中,对几何外形简单的单个建筑的数值模拟计算,优先采用结构化网格划分方法;对于湍流模型的选择,一般的工程应用中,建议在初步设计阶段选择RNGκ-ε湍流模型,而在最终设计阶段采用雷诺应力模型.     

常规兵器三综合环境试验技术研究

对温度-湿度-振动综合试验过程中的环境应力故障分析、试验标准剪裁、试验量值确定、试验设备及试验过程、试验结果评定等问题进行分析论述，分析结果对温度-湿度-振动综合试验设备选型和温度-湿度-振动综合试验具有参考价值。     

Intrinsic and Stimulated In Situ Biodegradation of Hexachlorocyclohexane (HCH)

The feasibility of the biodegradation of HCH and its intermediates has been investigated. A recent characterisation of two sites in The Netherlands has shown intrinsic biodegradation of HCH. At one site, breakdown products (monochlorobenzene, benzene and chlorophenol) were found in the core of the HCH-plume, whereas the HCH-concentration decreased over time and space. Characterisation of a second, industrial site indicated less intrinsic biodegradation and the need to stimulate biodegradation. In the laboratory, enhanced HCH degradation was tested with soil and groundwater material from both sites, and the required conversion to the intermediates benzene and monochlorobenzene was demonstrated. Furthermore, the biodegradation of these intermediates could be initiated by adding low amounts of oxygen (<5%). Adding nitrate enhanced this degradation. We hypothesise that this occurs through anaerobic nitrate reducing conversion of oxidised intermediates.At the non-industrial other site, intrinsic degradation took place, as shown in the laboratory experiments. Interpretation of the field data with computer codes Modflow and RT3D was performed. As a result of the modelling study, it has been proposed to monitor natural attenuation for several years before designing the final approach.At the industrial site, the results of the batch experiments are applied. Anaerobic HCH degradation to monochlorobenzene and benzene is stimulated via the addition of an electron donor.Infiltration facilities have been installed at the site to create an anaerobic infiltration zone in which HCH will be degraded, and these facilities are combined with the redevelopment of the site.     

沂沭断裂带上跨断层定点水准高值变化分析

2001年8月,沂沐断裂带上的冯家坊子和相公庄定点水准测量在更换了DiNill数字水准仪后同时出现高值变化。本文计算了冯家坊子、相公庄水准2000～2002年1～7月高差中数的偶然中误差,利用t检验、f检验对不同年相同时间段的均值、方差进行了统计检验,并结合地下水位、降雨、温度、环境等因素从定量和定性两个方面分析了水准观测值与它们之间的关系;讨论了引起水准观测值出现显著变化的原因。结果表明:冯家坊子、相公庄水准出现的高值变化与更换了数字水准仪有关,而冯家坊子水准出现的高值变化还与温度、地下水位变化有关,相公庄水准SN向出现的高值变化还与周围环境干扰有关。     

石化设备抗震抗风动力性能分析和安全性鉴定

石油化工设备类型繁多，形体复杂，其中包括现行抗震鉴定规范中有相关规定的常规设备，也包括一些在抗震鉴定规范中尚无规定的特殊设备。文章以独山子炼油厂的石化设备为例，简要介绍了它们的抗震分析方法和鉴定结果，对其中的高耸结构还进行了抗风分析。     

DEVELOPMENT OF A FRACTURED MEDIUM FLOW MODEL FOR A WASTE SITE1

ABSTRACT: A three‐dimensional fractured medium flow model was developed for the Bear Creek Valley (BCV) S‐3 site of the Oak Ridge Reservation (ORR) using SWIFT III. The numerical modeling for this site focused on a conceptual model established through the analysis of heterogeneous geologic units and matrix fracture properties of the subsurface in the BCV area. The SWIFT III modeling analysis was based on the previous modeling studies that used MODFLOW and MODPATH. A rigorous calibration was obtained first by comparing simulated results with the existing data on ground water levels and then by comparing pumping test results with the simulated ground water levels. A satisfactory agreement between observed and simulated results was obtained. The calibrated model was used to determine sustained yield from a ground water interceptor trench. Different withdrawal rates were used to simulate the performance of the trench for the sustained withdrawal of ground water.     

几种电缆隧道防火措施

通过对电缆隧道内加设防火墙、防火门，对电缆孔、洞进行防火封堵，安装火灾报警系统和气体灭火系统，提出对工程关键工艺及技术方面采取多项保护措施。     

隧道渗涌水量的随机模型预测

渗涌水问题是常见的隧道病害 ,是影响隧道正常使用 ,危及行车安全的重要因素。因此 ,科学地预测隧道涌水量大小 ,是制定最优防治水方案 ,确保安全通车的关键。笔者以大瑶山隧道渗涌水量的实测数据为基础 ,应用随机过程的理论和方法 ,建立了隧道渗涌水量的平稳序列预测模型 ,并将预测值与实测结果进行了对比 ,比较吻合。     

汽车环境风洞地面区域流场数值仿真

目的 探究汽车环境风洞地面区域流场规律,获取风洞边界层抽吸装置的最佳抽吸率和底盘测功机对风洞地面区域边界层厚度、风速、总压和静压的影响规律,并比较MRF法和旋转壁面法对底盘测功机转毂转动模拟的精度。方法 运用计算流体动力学方法对汽车环境风洞流场进行数值仿真计算。结果 边界层抽吸装置对应于喷口风速120 km/h时的最佳抽吸率为0.048。底盘测功机区域总压呈现下降趋势。相比于存在底盘测功机,汽车环境风洞无底盘测功机时,底盘测功机区域内相同位置的边界层厚度会增加1.28～12.22 mm。在前转毂的前侧、上侧、后侧和后转毂的上侧和后侧会有一个高风速区域,区域内风速比设定风速高1%～4%,与无底盘测功机相比,区域内静压值低0.32～46.02 Pa。在前后转毂前侧和后侧与地面相连接的凹部会有一个低风速区域,区域内风速比设定风速低1%～5%,与无底盘测功机相比,区域内静压值高0.08～49.34 Pa。底盘测功机转毂的转动会使附近区域的地面边界层厚度变大。在前转毂前侧,采用旋转壁面法进行模拟比MRF法地面边界层厚度增加近8 mm,而在其他位置,2种模拟方法对边界层厚度的模拟差别在1.5 mm...