Investigating the effect of compression on solute transport through degrading municipal solid waste

The effect of applied compression on the nature of liquid flow and hence the movement of contaminants within municipal solid waste was examined by means of thirteen tracer tests conducted on five separate waste samples. The conservative nature of bromide, lithium and deuterium tracers was evaluated and linked to the presence of degradation in the sample. Lithium and deuterium tracers were non-conservative in the presence of degradation, whereas the bromide remained effectively conservative under all conditions. Solute diffusion times into and out of less mobile blocks of waste were compared for each test under the assumption of dominantly dual-porosity flow. Despite the fact that hydraulic conductivity changed strongly with applied stress, the block diffusion times were found to be much less sensitive to compression. A simple conceptual model, whereby flow is dominated by sub-parallel low permeability obstructions which define predominantly horizontally aligned less mobile zones, is able to explain this result. Compression tends to narrow the gap between the obstructions, but not significantly alter the horizontal length scale. Irrespective of knowledge of the true flow pattern, these results show that simple models of solute flushing from landfill which do not include depth dependent changes in solute transport parameters are justified.     

Alternative management structures for municipal waste collection services: The influence of economic and political factors

Identifying and characterising the factors that determine why a local authority opts for a particular way of managing its waste collection service is an important issue, warranting research interest in the field of municipal solid waste (MSW) management. This paper presents empirical evidence spanning a broad time horizon (2002–2010) showing that economic and political factors impact in different ways on the provision of waste management services. We examine five alternatives in this area, including public and private service delivery formulas and, within each field, individual and joint options. Our findings highlight the importance of the service cost and that of the various indicators of fiscal stress as determinant factors of management decisions regarding the provision of MSW management services.     

外源钙盐对盐胁迫下沙拐枣渗透调节和膜脂过氧化的影响

为了解外源钙对缓解沙拐枣（Calligonum mongolicum）盐胁迫的主要生理机制,采用盆栽法探究在0、100、200 mmol/L的NaCl胁迫下,分别添加5、10、15和20 mmol/L的Ca（NO₃）₂对沙拐枣同化枝中w（脯氨酸）、丙二醛含量、w（可溶性蛋白）、w（可溶性糖）的影响.结果表明,单独添加Ca（NO₃）₂使沙拐枣同化枝内w（脯氨酸）、丙二醛含量、w（可溶性蛋白）以及w（可溶性糖）增加,即Ca（NO₃）₂对沙拐枣的生长造成了胁迫.对w（脯氨酸）、丙二醛含量、w（可溶性蛋白）、w（可溶性糖）来说,NaCl和Ca（NO₃）₂之间均存在极显著的交互作用,与对照相比,在c（NaCl）分别为100、200 mmol/L,添加c[Ca（NO₃）₂]为10、20 mmol/L时,w（脯氨酸）显著增加,分别达到最大值（736.7、1 086.3 μg/g）;丙二醛含量分别降低了37.8%和40.5%,w（可溶性蛋白）以及w（可溶性糖）均增加.总之,适宜浓度的钙盐通过增加渗透物质w（脯氨酸）、w（可溶性蛋白）及w（可溶性糖）,降低丙二醛的含量来有效缓解盐胁迫对沙拐枣幼苗产生的伤害,当c（NaCl）/c[Ca（NO₃）₂]为10:1时,缓解作用最佳,并且钙盐对沙拐枣盐胁迫的缓解属于抗性诱导的调节作用.      

短波长X射线衍射技术及在环境工程中的应用展望

介绍了短波长特征X射线衍射无损检测分析原理和方法,无损地测定了预拉伸铝板、高强钢孔挤压件、铝合金搅拌摩擦焊接件等材料部件的内部残余应力、内部物相、内部织构及其分布,并分析讨论了测试结果。该仪器具有体积小,投资少、使用维护方便等优势,展望了该无损检测分析技术在装备环境工程中的应用前景。     

丁腈橡胶密封圈高温老化行为——自由状态和承压状态

目的研究丁腈橡胶密封圈自由状态和承压状态下的高温老化行为。方法以拉伸强度和拉断伸长率为参数,对各温度下的老化行为进行表征和分析。结果 70℃条件下机械应力大大加快了橡胶密封件拉伸强度的下降速率,以致试验64 d时拉伸强度甚至比110℃时还低,拉断伸长率的下降速率也明显加快了;90℃加速条件下机械应力对拉伸强度的下降有一定的促进作用,但对拉断伸长率的变化基本无影响;110℃加速条件下机械应力对拉伸强度和拉断伸长率均没有明显的影响。结论机械应力在较低温度下可以显著促进丁腈橡胶密封圈热氧老化,高温条件下促进作用不明显。     

铜胁迫对不同基因型谷子幼苗基因组DNA多态性的影响

采用室内盆栽土培法,以4种基因型谷子(D2-8、安06、黄米、朝谷)为供试材料,研究了不同浓度Cu2+胁迫对谷子幼苗体内可溶性糖、脯氨酸、丙二醛(MDA)含量和基因组DNA多态性的影响.结果表明,经50~400 mg·kg-1Cu2+处理30 d后,4种谷子幼苗体内可溶性糖含量与对照相比呈现先上升后下降的趋势,在50 mg·kg-1时达到最大值.当浓度为200mg·kg-1以上时,4种谷子的可溶性糖含量的平均降幅为对照的32.44%~56.5%.脯氨酸则表现为低含量(≤50 mg·kg-1)的促进和高含量(≥100 mg·kg-1)的抑制效应,MDA含量均有增加且与对照差异显著(P<0.05).Cu2+胁迫下不同基因型谷子幼苗基因组DNA的RAPD图谱发生明显变化,表现为单条或多条RAPD谱带的增加和缺失或者荧光强度的改变,细胞中基因组模板DNA的稳定性下降,DNA多态性变化与Cu2+浓度之间存在剂量-效应关系.不同基因型谷子对Cu2+胁迫的生理和遗传损伤响应存在差异.利用RAPD技术获得的DNA多态性变化可作为检测Cu2+遗传毒性效应的生物标记物.     

太湖春季和秋季蓝藻光合作用活性研究

采用Phyto-PAM浮游植物分析仪测定太湖蓝藻光合作用活性的时空间分布.结果表明,太湖蓝藻光合活性具有显著的时空差异:春季蓝藻的最大光量子产量F_v/F_m (可变荧光和最大荧光之比)和实际光量子产量F_v'/F_m'分别在0.35~0.49和0.16~0.29之间,秋季蓝藻分别在 0.33~0.53和0.21~0.43之间,太湖秋季蓝藻的最大光合作用能力和实际光合作用能力大于春季蓝藻.春季和秋季蓝藻的非光化学淬灭NPQ(non-photochemical quenching)分别在0.012~0.17和0.035~0.26之间,秋季蓝藻的NPQ高于春季蓝藻,说明秋季蓝藻的自我保护能力高于春季蓝藻.快速光响应曲线(Rapid light curve, RLC)的特征参数表明春季蓝藻的光能利用效率、最大电子传递速率和光饱和强度点高于秋季蓝藻;从空间分布来看,蓝藻的最大光合作用能力、实际光合作用能力和光合作用效率在营养水平低和有水草分布的湖区相对较低,富营养化水平高的湖区则相对较高.因此,降低太湖营养盐浓度,恢复水生植物,能够抑制蓝藻的光合作用活性和生长,从而降低蓝藻水华强度.     

Quantitative analysis of microbial biomass yield in aerobic bioreactor

We have studied the integrated model of reaction rate equations with thermal energy balance in aerobic bioreactor for food waste decomposition and showed that the integrated model has the capability both of monitoring microbial activity in real time and of analyzing biodegradation kinetics and thermal-hydrodynamic properties. On the other hand, concerning microbial metabolism, it was known that balancing catabolic reactions with anabolic reactions in terms of energy and electron flow provides stoichiometric metabolic reactions and enables the estimation of microbial biomass yield (stoichiometric reaction model). We have studied a method for estimating real-time microbial biomass yield in the bioreactor during food waste decomposition by combining the integrated model with the stoichiometric reaction model. As a result, it was found that the time course of microbial biomass yield in the bioreactor during decomposition can be evaluated using the operational data of the bioreactor (weight of input food waste and bed temperature) by the combined model. The combined model can be applied to manage a food waste decomposition not only for controlling system operation to keep microbial activity stable, but also for producing value–added products such as compost on optimum condition.     

基于生态足迹改进模型的生态安全及其预测研究

由William Rees提出的生态足迹模型已经成为近年来生态可持续发展的重要的度量工具,但是该模型仅考虑了土地的基本生产功能,忽视了土地生态系统的服务功能。文章借鉴生态系统服务功能理论改进了传统的生态足迹模型,将生态系统服务功能价值当量因子引入生态足迹模型均衡因子和产量因子的计算中,改进后的模型体现了生态系统功能的完整性;同时,文章以江苏省2010年的统计数据为基础,应用改进模型计算了其2010年生态压力指数,结果表明,江苏省生态压力指数达到1.495,其安全状况已经超过了极不安全边界,处于极不安全状态;最后利用灰色理论GM(1,1)模型对其2011-2015年的生态安全状况进行了预测,发现江苏省未来5年生态压力指数快速增大,年平均增长速度为6.89%,表明江苏省未来5年生态安全状况将继续恶化,这将严重影响其生态可持续发展和经济可持续发展。     

ESS试验温度循环次数确定方法研究

介绍了环境应力筛选温度循环试验数学模型,通过雷达单元实际筛选数据统计建模计算,在相同的温度范围、温变速率条件下,进行筛选度和循环次数的理论与实际数据对比分析,得出了确定雷达组成电子单元温度循环试验循环次数的方法和修正系数。