CO2-free paper?

Black liquor gasification–combined cycle (BLGCC) is a new technology that has the potential to increase electricity production of a chemical pulping mill. Increased electricity generation in combination with the potential to use biomass (e.g. bark, hog fuel) more efficiently can result in increased power output compared to the conventional Tomlinson-boiler. Because the BLGCC enables an integrated pulp and paper mill to produce excess power, it can offset electricity produced by power plants. This may lead to reduction of the net-CO₂ emissions. The impact of BLGCC to offset CO₂ emissions from the pulp and paper industry is studied. We focus on two different plant designs and compare the situation in Sweden and the US. The CO₂ emissions are studied as function of the share of recycled fibre used to make the paper. The study shows that under specific conditions the production of “CO₂-free paper” is possible. First, energy efficiency in pulp and paper mills needs to be improved to allow the export of sufficient power to offset emissions from fossil fuels used in boilers and other equipment. Secondly, the net-CO₂ emission per ton of paper depends strongly on the emission reduction credits for electricity export, and hence on the country or grid to which the paper mill is connected. Thirdly, supplemental use of biomass to replace fossil fuel inputs is important to reduce the overall emissions of the pulp and paper industry.     

Comparative assessment of municipal sewage sludge incineration,gasification and pyrolysis for a sustainable sludge-to-energy management in Greece

For a sustainable municipal sewage sludge management, not only the available technology, but also other parameters, such as policy regulations and socio-economic issues should be taken in account. In this study, the current status of both European and Greek Legislation on waste management, with a special insight in municipal sewage sludge, is presented. A SWOT analysis was further developed for comparison of pyrolysis with incineration and gasification and results are presented. Pyrolysis seems to be the optimal thermochemical treatment option compared to incineration and gasification. Sewage sludge pyrolysis is favorable for energy savings, material recovery and high added materials production, providing a ‘zero waste’ solution. Finally, identification of challenges and barriers for sewage sludge pyrolysis deployment in Greece was investigated.     

单芯铜线过电流故障电弧熔痕的微观特征研究*

为准确认定电气火灾中过电流故障,模拟4~7倍额定电流（Ie）条件下单芯铜导线过电流故障,利用光学显微镜和扫描电子显微镜（SEM）分析过电流故障电弧熔痕的组织特征,并结合Image-Pro Plus软件测定晶粒直径、周长和面积,探究金相组织的量化判据和变化规律。结果表明:当I＝4Ie时,过电流故障电弧熔痕的金相组织主要为方向性较强的树枝晶;当I＝5Ie,6Ie时,金相组织内树枝晶占比减小,胞状晶占比升高;当I＝7Ie时,方向性较弱的胞状晶占主导。随着电流增加,晶粒的平均直径、周长和面积均呈增长趋势。通过火灾案例分析可知,实验结果与现场的电弧熔痕组织特征基本相符,验证火灾事故原因为过电流故障。     

Multi-step approach for comparing the local air pollution contributions of conventional and innovative MSW thermo-chemical treatments

In the sector of municipal solid waste management the debate on the performances of conventional and novel thermo-chemical technologies is still relevant. When a plant must be constructed, decision makers often select a technology prior to analyzing the local environmental impact of the available options, as this type of study is generally developed when the design of the plant has been carried out. Additionally, in the literature there is a lack of comparative analyses of the contributions to local air pollution from different technologies. The present study offers a multi-step approach, based on pollutant emission factors and atmospheric dilution coefficients, for a local comparative analysis. With this approach it is possible to check if some assumptions related to the advantages of the novel thermochemical technologies, in terms of local direct impact on air quality, can be applied to municipal solid waste treatment. The selected processes concern combustion, gasification and pyrolysis, alone or in combination. The pollutants considered are both carcinogenic and non-carcinogenic. A case study is presented concerning the location of a plant in an alpine region and its contribution to the local air pollution. Results show that differences among technologies are less than expected. Performances of each technology are discussed in details.     

中频熔炼炉测温仪电磁兼容设计与研究

中频熔炼炉测温仪工作在较强电磁场的环境中,对其电磁兼容设计是十分必要的。首先介绍了测温仪的抗干扰总体设计原理,给出了产生电磁干扰因素,提出了测温仪的各种抗电磁干扰措施,如屏蔽技术、接地与滤波技术等。实践表明,以上的各种措施提高了中频熔炼炉测温仪的电磁兼容性能。     

HMX与低熔点含能材料混合物的热安定性研究

目的 研究环四亚甲基四硝胺(HMX)与2,4,6-三硝基甲苯(TNT)、2,4-二硝基苯甲醚(DNAN)、3,4-二硝基呋咱基氧化呋咱(DNTF)3种低熔点、高挥发性含能材料混合后的热安定性及相关性质.方法 将HMX与3种低熔点含能材料按照质量比1:1进行混合,采用动态测压热分析法(DPTA)、差示扫描量热法(DSC)...     

辅助燃料对垃圾熔融炉炉温影响的分析研究

文章计算了在不同焦炭加入量及不同焦炭和煤的配比条件下处理城市生活垃圾时气化熔融炉的炉温。计算结果表明,用焚烧法处理重庆市的生活垃圾时,在常温鼓风条件下,要使垃圾灰渣完全熔融,焦炭配比至少应在42％以上;在一定的条件下,可以用煤部分或全部代替焦炭,同时配以高温鼓风,可使炉温达到并超过垃圾灰渣的熔融温度,从而使得垃圾灰渣熔融。     

垃圾焚烧飞灰熔融过程中重金属分离效果影响因素研究

采用重庆同兴垃圾焚烧发电厂产生的焚烧飞灰,在感应炉上进行熔融处理实验研究,探讨了熔融温度、熔融时间、碱度等因素对熔融过程中重金属分离效果的影响.结果表明,重金属的挥发率按其熔沸点高低区分明显,Pb、Zn和Cd的挥发率较高,分别为80%、60%和95%左右;Cr、Mn的挥发率均低于10%.随着熔融时间、熔融温度和碱度的增加,Pb、Zn、Cd、Mn、Cr的挥发率变化趋势不明显;铁浴熔融方式可进一步促进Zn、Pb、Hg的挥发,有利于Cr、Cu从熔渣中分离出来,与生铁形成合金.对熔渣的浸出毒性测试结果表明,重金属元素的浸出毒性均可达标(GB5085.3-1996).     

合肥化肥厂造气废水的处理

采用渠式磁化器与CFC型斜板沉淀器组合工艺,处理造气废水,该废水含SS285.5mg/L,CN~-8.06mg/L,S~(2-)1.61mg/L,处理后的水可循环回用。     

热力管加热桥面抗冰融冰试验研究

为了研究热力管加热桥面抗冰融冰对于公路交通安全的影响,制作了尺寸为600 mm×600 mm×380 mm的桥梁试件,在人工环境室对热力管融冰进行了模型试验。结果表明:试件上表面温升速率和融冰时间取决于热力管间距、隔热层、风速、环境温度和热力管外表面温度。在相同工况条件下,100 mm间距的热力管融冰能力要大于150 mm间距的热力管,无隔热层时,100 mm间距热力管向上传递的热量占总加热量的13.4%,融冰时间为211 min;150 mm间距热力管向上传递的热量占总加热量的18.3%,融冰时间为271 min。在热力管层下面铺设厚度为2 mm、导热系数为0.062 W/（m· K）的隔热材料后,100 mm间距热力管向上传递的热量占总加热量的46.9%,融冰时间为175 min;150 mm间距热力管向上传递的热量占总加热量的51.9%,融冰时间为161 min。热力管层铺设隔热材料可有效阻止热量向下传递,从而缩短融冰时间。