放射性废物微波真空干燥处理器的漏能防护

介绍了放射性废物微波真空干燥处理器的微波漏能现状及所采取的防护措施。监测结果表明，经过防护，有效地减弱了设备的微波漏能，达到了国家防护标准。     

微波消解/ICP-AES法分析冶炼厂固废中重金属

分析固体废物中金属元素全量分析的微波消解条件,通过实验确定样品的粉碎粒度、消解功率、消解温度、消解时间等因素对样品消解效果的影响,以等离子发射光谱测定冶炼厂固体废物中24种痕量金属元素,通过测定的检出限、精密度、准确度,确立冶炼厂固体废物痕量金属全量分析检测方法准确高效。     

微波消解-火焰原子吸收分光光度法测定固体废物中的钡

采用微波消解法对固体废物浸出液样品进行前处理,采用乙炔-空气火焰原子吸收法测定钡的含量,检出限为2．04mg／L,加标回收率为94．5％,精密度为4．85％-6．81％。     

微波消解—火焰原子吸收分光光度法测定土壤中的钴、钼

土壤样品的传统消解方法是用电热板硝酸-氢氟酸-高氯酸体系,消解时间长,试剂用量大,对操作人员身体危害大,并且测定结果也不准确。本文阐述了微波消解——原子吸收分光光度法测定土壤中的钴、钼。通过硝酸-盐酸-氢氟酸-高氯酸消解体系,选择出微波消解的最佳消解条件,通过对微波消解体系和传统消解体系进行对比试验,微波消解体系具有赶酸时间短,准确度高,对人体危害小,是一种值得推广的土壤消解方法。     

微波辐照热解废印刷电路板产物的分析研究

为了减少电子废弃物对环境的危害,实现其资源化回收利用,研究了微波辐照热解废印刷电路板的效果,并采用红外光谱、气相色谱质谱和X荧光光谱等方法对热解产物的组成及性质进行了分析.结果显示:微波热解得到的气体、液体、固体的产率分别为7%～33%、26%～45%、31%～51%,其中气体主要由CO、CO2、H2及有机烃类组成,可燃性气体占70%(体积分数)左右,可作为燃料气加以利用;液体分为水相及油相,经常压蒸馏后得到的120～250 ℃馏分主要为单酚化合物,苯酚高达50%(质量分数)左右,甲基苯酚和邻甲基苯酚为25%(质量分数)以上,是良好的化工原料;固体中除炭外,还含有许多金属如铅、锡和铜等,可以回收利用.说明微波热解技术处理电子废弃物可实现资源化回收利用.     

微波联合消解流动注射光度法测定水中总氮和总磷

利用微波联合消解水样,采用流动注射分析技术,建立了在线测定水中总氮和总磷的快速分析方法.优化了试验条件,在线性范围内,总氮和总磷的工作曲线线性关系良好,检出限分别为0.03 mg/L和0.01 mg/L,相对标准偏差分别为1.5%和1.2%,加标回收率分别为96.7%～103%和98.8%～102%.     

An efficient technology to treat heavy metal--lead--contaminated soil by microwave radiation

Microwave (MW) technology can be used to vitrify contaminated soil wastes and immobilize heavy metal ions in soils. More than 93% of the Pb(II)-contaminated soil was vitrified to a glass/ceramic formation after 30 min of MW radiation. In a 6-year study, the Pb(II) concentration of the vitrified soil in the leaching test was less than 1.0 mg/l, which is substantially below the USEPA regulatory limit of 5.0 mg/l.     

Dechlorination of PCBs in the simulative transformer oil by microwave-hydrothermal reaction with zero-valent iron involved

The conventional hydrothermal reaction with iron powder, NaOH and H₂O as reactants was reported to occur at temperature above 423 K, and iron oxides (Fe₃O₄ and NaFeO₂) and hydrogen were produced. In this study, microwave heating was adopted to take the place of conventional heating to induce the hydrothermal reaction. Under microwave irradiation, NaOH and H₂O absorbed microwave energy by space charge polarization and dipolar polarization and instantly converted it into thermal energy, which initiated the hydrothermal reaction that involved with zero-valent iron. X-ray diffraction (XRD) analysis found Fe₃O₄/NaFeO₂ and confirmed the occurrence of microwave-induced hydrothermal reaction. The developed microwave-hydrothermal reaction was employed for the dechlorination of PCBs. Hexadecane containing 100 mg L⁻¹ of Aroclor1254 was used as simulative transformer oil, and the dechlorination of PCBs was evaluated by GC/ECD, GC/MS and ion chromatography. For PCBs in 10 mL simulative transformer oil, almost complete dechlorination was achieved by 750 W microwave irradiation for 10 min, with 0.3 g iron powder, 0.3 g NaOH and 0.6 mL H₂O added. The effects of important factors including microwave power and the amounts of reactants added, on the dechlorination degree were investigated, moreover, the dechlorination mechanism was suggested. Microwave irradiation combined with the common and cheap materials, iron powder, NaOH and H₂O, might provide a fast and cost-effective method for the treatment of PCBs-containing wastes.     

Assessment of organochlorine pesticide residues in Atlantic Rain Forest fragments, Rio de Janeiro, Brazil

A superficial water quality survey in a watershed of the Paraíba do Sul River, the main water supply for the most populated cities of southeastern Brazil, was held in order to assess the impact of the expansion of agricultural activity in the near border of the Atlantic Rain Forest. The aim of this study was to investigate the presence of priority organochlorine pollutants in soils and superficial waters of Atlantic rainforest fragments in Teresópolis, Rio de Janeiro State. Soil sample preparations were compared by using ultrasound, microwave assisted extraction and Soxhlet extraction. Recoveries of matrix spiked samples ranged from 70 to 130%. Analysis of a certified soil material showed recoveries ranging from 71 to 234%. Although low concentrations of organochlorine residues were found in water and soil samples, this area is of environmental importance and concern, thus demanding a monitoring program of its compartments.     

微波消解-原子吸收光度法测定土壤中铜锌铅镉镍铬

用微波消解－原子吸收光度法测定土壤中铜，锌，铅，镉，镍和铬。通过硝酸－氢氟酸－过氧化氢体系消解液对土壤样品消解，选择出微波最佳消解条件。对硝酸－盐酸－过氧化氢体系消解液和硝酸－氢氟酸－过氧化氢体系消解液进行消解对比试验，发现前者不能将土壤样品完全消解，后者能将样品消解完全，但需将消解液中剩余的酸赶尽，否则测定结果将明显偏低。微波消解土壤与传统电热消解相比，操作简便快速，可提高工作效率。