利用涤纶废料合成不饱和聚酯树脂的研究

以涤纶 (PET)废料为原料进行醇解 ,缩聚合成了不饱和聚酯树脂 ,研究了反应温度、反应时间、物料配比、苯乙烯混合量等对反应及树脂性能的影响 ,确定了适宜的工艺条件。结果表明 :所得树脂性能优于市售同类 191#树脂 ,不仅使废料得到利用 ,同时可降低生产成本 ,具有明显的经济效益和社会效益     

Synthesis of poly(hydroxyalkanoate) from hydrolyzed linseed oil

Pseudomonas putida was grown on a mixture of long-chain fatty acids obtained by hydrolysis of linseed oil. A poly(3-hydroxyalkanoate) containing 51.2% of unsaturated monomers was obtained. A considerable percentage (13.6%) was constituted by C₁₄ and C₁₆ monomers containing three double-bonds in the side chains. The polymer showed a high tendency to crosslink when it was kept in presence of air. In the crosslinked polymer no polyunsaturated monomers could be detected.     

Effects of sludge retention time, carbon and initial biomass concentrations on selection process: From activated sludge to polyhydroxyalkanoate accumulating cultures

Four sequence batch reactors (SBRs) fed by fermented sugar cane wastewater were continuously operated under the aerobic dynamic feeding (ADF) mode with different configurations of sludge retention time (SRT), carbon and initial biomass concentrations to enrich polyhydroxyalkanoate (PHA) accumulating mixed microbial cultures (MMCs) from municipal activated sludge. The stability of SBRs was investigated besides the enrichment performance. The microbial community structures of the enriched MMCs were analyzed using terminal restriction fragment length polymorphism (T-RFLP). The optimum operating conditions for the enrichment process were: SRT of 5 days, carbon concentration of 2.52 g COD/L and initial biomass concentration of 3.65 g/L. The best enrichment performance in terms of both operating stability and PHA storage ability of enriched cultures (with the maximum PHA content and PHA storage yield (Y_PHA/S) of 61.26% and 0.68 mg COD/mg COD, respectively) was achieved under this condition. Effects of the SRT, carbon concentration and initial biomass concentration on the PHA accumulating MMCs selection process were discussed respectively. A new model including the segmentation of the enrichment process and the effects of SRT on each phase was proposed.     

甘油基混合培养物合成PHA及其与OUR的关系

聚β羟基烷酸盐(PHA)以其较好的生物相容性、可生物降解性和再生性成为最有前途的生物高分子材料.本文基于甘油作为基质在饱食-饥饿模式下富集合成PHA的混培物,以乙酸、丙酸、丁酸、乳酸和葡萄糖作为基质考察混培物合成PHA的基质广谱性,结果表明乳酸和乙酸作为基质时PHA的产率系数较高;使用不同比例乙酸/丙酸混合基质时,PHA产量随着乙酸含量的增加而增大,乙酸/丙酸为3∶1时PHA产量最高.通过活性污泥同时贮存与生长模型模拟与线性回归两种方法证实,在单一基质或乙酸/丙酸混合基质情况下,PHA合成速率与OUR存在线性关系,因此,基于在线OUR测量数据可以实时估计PHA合成量.     

非饱和土石坝渗流分析

传统的渗流分析主要考虑饱和区而忽略非饱和区内的渗流,本文基于饱和-非饱和渗流计算原理,采用有限元法考虑了非饱和区渗流的影响,并以各向同性均质坝和心墙土石坝为算例进行计算分析。算例表明,由于基质吸力产生的虹吸作用,使得浸润线上部的非饱和区内也存在着连续的水流,通过分析这种水流的特点,定性地得出其对土石坝渗流稳定性的影响。     

压力板仪法测土-水特征曲线试验研究

非饱和土土-水特征曲线(SWCC)表示了土中含水量与吸力之间的关系。针对非饱和土干-湿循环过程中的吸力变化特征,开展试验研究。采用体积压力板仪实现非饱和土的脱湿和吸湿过程。试验成果显示:(1)土-水特征曲线是不稳定的,它与土体含水率的变化路径有关;(2)在干湿循环过程中,相同的基质吸力具有不同的含水量。     

非饱和土壤渗透系数空间不确定性对溶质运移的影响

包气带渗透系数的不确定性是影响非饱和带溶质运移的主要因素。应用贝叶斯方法对非饱和土壤渗透系数进行前处理,使用Monte-Carlo方法模拟其空间不确定性,并通过HYDRUS-1D模型对溶质运移进行数值模拟,研究包气带渗透系数的空间不确定性对溶质运移的影响。结果表明,由于包气带渗透性的不确定性使得溶质浓度分布呈现明显的不确定性,包气带内不同点的浓度值相差很大。与忽略包气带土性参数空间不确定性的模拟结果相对比,考虑包气带渗透系数不确定性的模拟结果与实际情况更加接近,更具合理性和科学性。同时,根据模拟结果,对实际工作中进行地下水数值模拟时溶质初始浓度输入值的确定提出相应建议。     

限氮和限磷对活性污泥合成聚羟基烷酸的影响

聚羟基烷酸(PHA)是微生物在不平衡营养条件下贮存的一种胞内聚合物,限磷和限氮两种方式均有助于活性污泥中的混合菌群合成PHA,研究考察了两种不同方式下活性污泥合成PHA的情况。实验结果表明,当C∶N为125时,活性污泥中PHA的合成量达到细胞干重的59%;当C∶P为750时,活性污泥积累的最大PHA含量占细胞干重的37%,说明限氮和限磷两种方式对活性污泥合成PHA均有很大影响,且限氮方式更有效。     

Formation of polyester blends by a recombinant strain ofPseudomonas oleovorans: Different poly(3-hydroxyalkanoates) are stored in separate granules

WhenPseudomonas oleovorans (GPo1) is grown on sodium octanoate under ammonium limiting conditions, it is able to accumulate a copolyester consisting of medium chain length 3-hydroxyalkanoic acids (PHA_m). 3-Hydroxybutyrate is only incorporated in trace amounts. WhenP. oleovorans is equipped with the PHB biosynthetic genes ofAlcaligenes eutrophus (GPo1[pVK101::PP1]), it forms a polyester containing major amounts of 3-hydroxybutyrate. The resulting polymer however is a blend of PHA_m and PHB, rather than a copolymer of 3-hydroxybutyrate and medium chain length 3-hydroxyalkanoic acids [11]. To establish whether PHA_m and PHB molecules are stored in the same or separate granules by this recombinantP. oleovorans strain, we studied polymer forming cells by freeze-fracture electron microscopy. This approach is possible because previous freeze-fracture electron microscopy studies on PHA_m and PHB accumulating strains have shown that PHA_m and PHB granules can be distinguished from each other: PHA_m granules from mushroom-like structures, whereas PHB granules from needle structures during freeze-fracturing. In this paper we show that stationary phase cells of GPo1[pVK101::PP1] contained both mushroom and needle-like structures, indicating that PHA_m and PHB chains were stored in separate granules. To be able to determine whether the separation of PHA_m and PHB is complete, the respective granules were separated on sucrose gradients. A total cell extract of GPo1[pVK101::PP1] which was subjected to sucrose gradient centrifugation revealed two white bands of different densities: the upper band with a density of 1.05 g/mL consisted exclusively of PHA_m granules, while the lower band with a density of 1.19 g/mL consisted of PHB granules only. Thus, when bacteria synthesize both PHA_m and PHB, the resulting polymer chains are segregated completely and stored in separate granules.     

Modeling Flow Through a One-Dimensional Multi-Layered Soil Profile Using the Method of Lines

The vertical flow of water through horizontal layers of soil is considered using the Method of Lines. Continuity of mass principles are used to develop the interface boundary conditions, by introducing fictitious points at the interface, and the boundary conditions are handled using explicit and iterative approximations. Both the pressure based, and the water content based forms of Richards' equation are solved using the Method of Lines. The solutions obtained are compared with some particular analytic solutions obtained from the literature, and the results show that good accuracy can be achieved. It is also shown that the water content model can handle a large discontinuity at the interface when compared against the analytical solution. This result is also confirmed against a numerical example from the literature, and was effective for relatively dry initial conditions.