不同氧化锰矿物与砷的交互作用

利用从土壤铁锰结核中分离筛选得到的1株锰氧化细菌(芽孢杆菌,Bacillus sp.)GY16合成生物氧化锰,与化学合成的水钠锰矿进行比较,研究了不同氧化锰对As的氧化吸附特征.结果表明,生物氧化锰和化学氧化锰对As(Ⅲ)均有强烈的氧化作用,化学氧化锰对As(Ⅲ)的氧化速率要高于生物氧化锰,而单位物质的量的生物氧化锰对As(Ⅲ)的氧化量可达化学氧化锰的5倍,并且对As(Ⅴ)有非常明显的吸附作用,而化学氧化锰对As(Ⅴ)的吸附量则非常少.此外,随着生物氧化锰与As(Ⅲ)/As(Ⅴ)反应的进行,生物氧化锰对As(Ⅲ)/As(Ⅴ)的氧化吸附速率均逐渐降低.随着pH的增加,生物氧化锰对As(Ⅲ)的氧化量及As(Ⅴ)的吸附量均呈现出明显的下降趋势,但是化学氧化锰对As(Ⅴ)的吸附量却有微弱的增加.研究结果可为生物氧化锰应用于环境修复提供可靠的技术支撑.     

间歇式生物反应器中PHACs的吸附降解性及动力学特性

利用间歇反应器考察了非那西丁(PNT)、吉非罗齐(GFZ)、咖啡因(CAF)、双氯芬酸(DCF)和胆固醇(CH)5种医药类污染物分别在厌氧、缺氧及好氧条件下的吸附与降解特性,并通过动力学拟合深入考察目标物的降解速率及所符合的反应级数.研究表明,PNT在4 h内就能得到100%的降解,GFZ与CH能通过吸附与降解得到部分或全部去除.好氧条件下目标物的泥水分配系数kp值与降解速率均高于缺氧与厌氧条件,好氧条件下CAF的去除率达到99%以上.5种目标物除PNT外都有不同程度的吸附,目标物的污泥吸附能力为CHDCFGFZCAF;动力学拟合结果表明,生物降解动力学一级反应速率PNTCAF,二级反应速率CHGFZ;DCF几乎不能被生物降解,但符合二级吸附动力学模型,其平衡吸附量最高可达总投加量的71%.     

Heterogeneous Fenton-like degradation of 4-chlorophenol using iron/ordered mesoporous carbon catalyst

Ordered mesoporous carbon supported iron catalysts(Fe/OMC) were prepared by the incipient wetness impregnation method and investigated in Fenton-like degradation of 4-chlorophenol(4CP) in this work. XRD and TEM characterization showed that the iron oxides were well dispersed on the OMC support and grew bigger with the increasing calcination temperature. The catalyst prepared with a lower calcination temperature showed higher decomposition efficiency towards 4CP and H2O2, but more metals were leached. The effect of different operational parameters such as initial pH, H2O2 dosage, and reaction temperature on the catalytic activity was evaluated. The results showed that 96.1% of 4CP and 47.4% of TOC was removed after 270 min at 30°C, initial pH of 3 and 6.6 mmol/L H2O2. 88% of 4CP removal efficiency was retained after three successive runs, indicating Fe/OMC a stable catalyst for Fenton reaction. 4CP was degraded predominately by the attack of hydroxyl radical formed on the catalyst surface and in the bulk solution due to iron leaching. Based on the degradation intermediates detected by high performance liquid chromatography, possible oxidation pathways were proposed during the 4CP degradation.     

Photocatalytic removal of NO and NO2 using titania nanotubes synthesized by hydrothermal method

In this study, the photocatalysts of titania nanotubes(TNTs) were synthesized at different calcination temperatures using commercial Degussa TiO2(P25) as a precursor. The materials were then characterized by BET, SEM, TEM, and XRD analyses. The photocatalytic reactions with NO and NO2 under UV-A irradiation were both performed. The results showed that the photocatalytic reaction rate of NO was much faster than that of NO2, and the conversion of NO2 to nitrate was the rate-limiting step for photocatalytic removal of NOx if the nitrate produced cannot be removed continuously from the photocatalyst surface. For TNTs calcined at different temperatures, a significant enhancement was observed on the total NOx removal efficiency by TNT calcined at 500°C for both NO and NO2 photocatalytic reaction, which could be attributed to its high anatase crystallinity as well as high surface area. These two factors affect primarily on the NO2conversion step in which the high anatase crystallinity could be responsible for the high efficiency at the beginning, while the high surface area could be accounted for retaining this high efficiency from nitric acid poisoning during the test period.     

Combination of heterogeneous Fenton-like reaction and photocatalysis using Co-TiO2 nanocatalyst for activation of KHSO5 with visible light irradiation at ambient conditions

A novel coupled system using Co–Ti O2 was successfully designed which combined two different heterogeneous advanced oxidation processes, sulfate radical based Fenton-like reaction（SR-Fenton） and visible light photocatalysis（Vis-Photo）, for degradation of organic contaminants. The synergistic effect of SR-Fenton and Vis-Photo was observed through comparative tests of 50 mg/L Rhodamine B（Rh B） degradation and TOC removal. The Rhodamine B degradation rate and TOC removal were 100% and 68.1% using the SR-Fenton/Vis-Photo combined process under ambient conditions, respectively. Moreover, based on XRD, XPS and UV-DRS characterization, it can be deduced that tricobalt tetroxide located on the surface of the catalyst is the SR-Fenton active site, and cobalt ion implanted in the Ti O2 lattice is the reason for the visible light photocatalytic activity of Co–Ti O2. Finally, the effects of the calcination temperature and cobalt concentration on the synergistic performance were also investigated and a possible mechanism for the synergistic system was proposed. This coupled system exhibited excellent catalytic stability and reusability,and almost no dissolution of Co2＋was found.     

Multiple biomarkers response in maize (Zea mays L.) during exposure to copper

Biomarkers in higher plants played an important role to estimate exposure effects of pollutants in soil ecosystem and have received increasing attention in recent years. The qualitative and quantitative modifications arising in amplified fragment length polymorphism （AFLP） profiles as a measure of DNA effects were compared with a number of parameters, namely, the root length, total soluble protein content in root tips, chlorophylls content and shoot size to select the most sensitive biomarker responding to copper stress in the range of 0--600 mg/kg. The changes occurring in AFLP profiles of root tips following Cu treatment included loss of normal bands and appearance of new bands and variation in band intensity in comparison to that of the normal seedlings, A reduction in root length was observed at the 200 mg/kg of copper, which was accompanied with a decrease in total soluble protein content. According to their sensitivity to the copper toxicity, the above indicator rank in the following order： AFLP profiles 〉 total soluble protein content 〉 root length 〉 chlorophylls content 〉 shoot. We concluded that the AFLP offered a useful alternative hiomarker assay for the detection of genotoxic effects of environmental pollutants.     

Preparation and characterization of Fe2O3-CeO2-TiO2/γ-Al2O3 catalyst for degradation dye wastewater

In order to develop a catalyst with high activity for catalytic wet oxidation （CWO） process at room temperature and atmospheric pressure, Fe2O3-CeO2-TiO2/γ-Al2O3 catalyst was prepared by consecutive impregnation method and the prepared parameters were optimized. The structure of the catalyst was characterized by BET, XRF, SEM and XPS technologies, and the actual wastewater was used to investigate the catalytic activity of Fe2O3-CeO2-TiO2/γ-Al2O3 in CWO process. The experimental results showed that the prepared catalyst exhibited good catalytic activity when the doping amount of Ti was 1.0 wt% （the weight ratio of Ti to carriers）, and the middle product, Fe2O3-CeO2-TiO2/γ-Al2O3, was calcined in 450℃ for 2 h. The CWO experiment for treating actual dye wastewater indicated that the COD, color and TOC of actual wastewater were decreased by 62.23%, 50.12% and 41.26% in 3 h, respectively, and the ratio of BOD5/COD was increased from 0.19 to 0.30.     

沼渣生物炭基Fenton催化剂的制备及其高效降解吡虫啉农药废水的研究

以废弃物沼渣和含铁剩余污泥为原料,采用一步热解法制备沼渣生物炭基Fenton催化剂(以下简称催化剂),构建了非均相Fenton反应体系处理含吡虫啉模拟废水,考察了H2 O2和催化剂用量对吡虫啉去除率的影响.结果表明,非均相Fenton反应体系中,H2 O2最佳投加量为0.50 g/L,催化剂最佳投加量为1.00 g/L...     

微纳米气液分散体系吸收NO

以模拟烟气为气源,去离子水为水源,通过微纳米气泡发生器形成微纳米气液分散体系,吸收模拟烟气中的NO,考察了多种因素对脱硝率(η)和气相体积总传质系数(KGa)的影响,分析了微纳米气液分散体系吸收NO的反应机理。结果表明:η和KGa随着进气NO体积分数和十二烷基苯磺酸钠(SDBS)质量浓度的提高而下降;随着吸收液初始pH的提高先降低后升高;随着进气O_2体积分数的增大而提高;随着吸收液温度的升高先提高后降低;控制进气NO体积分数为0.06%时,在吸收液初始pH为2.0、吸收剂为去离子水、吸收液温度为25℃、进气O_2体积分数为10%的最佳条件下,脱硝率可达81.0%。微纳米气液分散体系是通过产生羟基自由基从而对NO进行氧化吸收的。     

雅-大凝析气田信息化建设及应用

介绍了雅-大凝析气田实施信息化建设的主要内容及功能,通过引用新技术,探索新方法,在人力资源配置效率、劳动组织模式优化、油气井安全管理等方面取得了显著成效.