Enhanced photocatalytic activity of quantum-dot-sensitized one-dimensionally-ordered ZnO nanorod photocatalyst

An efficient photocatalyst was fabricated by assembling quantum dots （QDs） onto one-dimensionally-ordered ZnO nanorods, and the photocatalytic properties for Methyl Orange degradation were investigated by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, UV-Vis-NIR absorption spectroscopy and photoluminescence. The results indicate that the catalyst with assembled QDs is more favorable for the degradation than the pristine ZnO nanorods. The QDs with core-shell structure lower the photocatalytic ability due to the higher carder transport barrier of the ZnS shell layer. Besides its degradation efficiency, the photocatalyst has several advantages given that the one-dimensionally-ordered ZnO nanorods have been grown directly on indium tin oxide substrates. The article provides a new method to design an effective and easily recyclable photocatalyst.     

Waste oyster shell as a kind of active filler to treat the combined wastewater at an estuary

Estuaries have been described as one of the most difficult environments on Earth. It is difficult to know how to treat the combined wastewater in tidal rivers at the estuary, where the situation is very different from ordinary fresh water rivers. Waste oyster shell was used as the active filler in this study in a bio-contact oxidation tank to treat the combined wastewater at the Fengtang Tidal River. With a middle-experimental scale of 360 ma/day, the average removal efficiency of COD, BOD, NH3-N, TP and TSS was 80.05%, 85.02%, 86.59%, 50.58% and 85.32%, respectively, in this bio-contact oxidation process. The living microbes in the biofilms on the waste oyster shell in this bio-contact oxidation tank, which were mainly composed of zoogloea, protozoa and micro-metazoa species, revealed that waste oyster shell as the filler was suitable material for combined wastewater degradation. This treatment method using waste oyster shell as active filler was then applied in a mangrove demonstration area for water quality improvement near the experiment area, with a treatment volume of 5 × 10^3 m^3/day. Another project was also successfully applied in a constructed wetland, with a wastewater treatment volume of 1 ×10^3 m^3/day. This technology is therefore feasible and can easily be applied on a larger scale,     

铋-镧复合氧化物的制备与光催化活性

以同时含La(Ⅲ)和B(iⅢ)的双金属配合物BiLa(dtpa)(NO3).3.5H2O为前驱体,通过500℃的热分解制得铋-镧复合氧化物Bi0.775La0.225O1.5,并利用XRD、SEM和UV-Vis漫反射等分析手段研究灼烧时间对样品的结构及光吸收特性的影响。以甲基橙模拟废水的光催化降解为模型,研究不同灼烧时间对铋-镧复合氧化物光催化活性的影响。结果表明,热分解所得铋-镧复合氧化物样品呈疏松多孔结构,对光具有较宽的吸收范围,在紫外光区具有较好的光催化活性,灼烧时间影响样品的粒径和形貌以及光催化效果,在20 mg/L甲基橙溶液中添加灼烧1 h和4 h所得的催化剂样品1 g/L,光照4 h后甲基橙褪色率分别达95%和91%。     

磁性多孔陶粒生物膜反应器处理焦化废水的试验研究

以磁性材料为原料,经过特定的工艺处理,对多孔陶瓷进行磁化改性获得磁性多孔载体,并将该载体应用于生物膜反应器中进行焦化废水处理试验。对不同类型的多孔陶粒载体进行对比试验,结果表明:磁性载体生物膜反应器对COD、NH3-N的去除率比普通活性污泥法高出25%³0%,比非载体生物膜反应器高出15%30%,比非载体生物膜反应器高出15%²0%左右。反应器的曝气量为1.5 L/h,曝气时间为10 h/d,温度为2520%左右。反应器的曝气量为1.5 L/h,曝气时间为10 h/d,温度为25³0℃。焦化废水经磁性载体生物膜反应器处理后,上清液中COD,NH3-N的去除率均在90%左右。出水浓度达到国家工业废水排放二级标准(GB18918-2002)。     

LaCl_3对绿萝净化甲醛能力及生理生化变化的研究

对南通市新城区20个居民小区共110家住户,进行入户调查并检测室内空气甲醛浓度;以室内观赏植物绿萝作为受试对象,分析喷施稀土LaCl3对绿萝叶片叶绿素含量和质膜透性的影响,进而确定绿萝喷施LaCl3的适宜剂量;采用熏蒸法考察LaCl3对甲醛胁迫下室内观赏植物绿萝降醛能力的影响,并研究其甲醛抗性的生理生化机制。研究结果表明,南通市新城区居室空气甲醛污染较为严重,污染程度与装修后时间长短有关;绿萝喷施LaCl3的适宜浓度为20 mg/L;在喷施适宜浓度LaCl3之后,室内观赏植物绿萝单位叶面积吸收甲醛能力有所增强,提升幅度为19.75%;甲醛胁迫下,绿萝叶绿素含量降低了39.87%,质膜透性和MDA累积量分别增加了8.17、56.92%,POD活性升高了11.32%;经LaCl3预处理后,较甲醛胁迫组,绿萝叶绿素含量降幅与质膜透性、MDA浓度增幅均变小,而POD活性增幅变大。     

论轴承产业信息化交易开放平台创新发展

信息化水平的高低已经成为一个地区社会发展水平的重要标准。为了又快又好的创新发展洛阳的轴承产业信息化,以洛阳为中轴,结合地域产业优势,带动全国中小轴承企业发展,加快轴承产业资源整合,促进中国轴承企业大联盟,一个创新型项目悄然运作,并日渐展现出自己的光彩。它就是中国轴承交易开放平台CBTOP。其作为中国目前唯一能够实现全程交易、并由金融机构作为第三方担保的新一代B2B电子商务服务平台,它的出现标志着中国的轴承产业即将开始新一轮的洗牌。     

凹凸棒石基复合材料处理印染废水的研究

以凹凸棒石为载体,钛酸四丁酯为原料,通过溶胶-凝胶法,制成TiO2/凹凸棒石基复合材料(TiO2/ATT),并对所制得的复合材料进行了XRD和BET表征。在波长为254 nm的16 W紫外灯光照下,以活性黑KN-B印染废水为脱色对象,分别探讨了TiO2/凹凸棒石复合材料的煅烧温度、投加量、活性黑KN-B染料的初始浓度、溶液的pH值和反应温度等因素对印染废水脱色率的影响。实验结果表明:用煅烧温度500℃的TiO2/凹凸棒石基复合材料处理活性黑KN-B印染废水,催化剂的投加量为15 g/L、活性黑KN-B的初始浓度为10 mg/L、pH小于7、反应温度为20℃时,光催化反应4 h内即能达到较高的去除率,对活性黑KN-B的脱色率可达95%以上。     

磁性纳米Fe_3O_4对毒死蜱的增效和催化降解研究

应用溶剂热法制备了磁性纳米Fe3O4(NMFO),并用聚乙二醇-6000对其进行改性,使纳米Fe3O4表面由亲水性转变为亲脂性,从而实现与亲脂性毒死蜱的复合。纳米Fe3O4的加入使毒死蜱的生物活性明显提高。室内毒力试验结果表明:含0.2%纳米Fe3O4的Fe3O4/毒死蜱制剂的毒力在室内和紫外光照下分别是同浓度纯毒死蜱的3.84倍和4.17倍;其降解率也显著提高,纳米Fe3O4/毒死蜱制剂在太阳光照下放置10 d,其降解率可达93.2%,相同条件下纯毒死蜱的降解率是10.14%,而将添加或未添加纳米Fe3O4的毒死蜱于暗处放置相同的时间,其降解率分别为1.21%和0.23%。     

硝酸改性活性炭特征及其催化臭氧氧化性能

采用硝酸氧化对颗粒活性炭进行改性处理,研究了硝酸改性后活性炭结构和表面化学性质,及其对酸性大红3R的吸附能力和催化臭氧氧化去除效果的影响。结果表明,硝酸改性后,活性炭比表面积减小,微孔孔容减小,中孔孔容增大。活性炭表面以羧基为主的酸性含氧官能团随着硝酸改性浓度提高而显著增加,并对其吸附能力和催化臭氧氧化能力产生显著影响。硝酸改性活性炭吸附能力在碱性条件下由于表面酸性官能团和酸性大红3R之间的静电作用而有所降低;在酸性条件下由于二者的色散作用而增强。表面酸性官能团在碱性条件下参与臭氧分解,产生·OH,增强了硝酸改性活性炭对酸性大红3R的催化臭氧氧化去除效果。     

福州市霾天气大气结构分析及其预报研究

福州为福建省霾天气高发区之一。文章利用2006-2010年历史探空数据以及福州站地面观测资料中常规数据,结合天气形势,开展基于V-3θ方法的福州霾低能见度天气预报研究,研究结果表明:当福州处于暖区辐合内部时霾发生率最高,其次是变性冷高压和高空槽,而低涡切变及台风和热带辐合带则不易出现霾;V-3θ结构图上判断霾天气发生的主要要素为厚度超过25 hPa的逆温层及其上下的滚流特征、中低层非均匀结构以及暖层云;预判霾天气消散的大气结构特征主要为风场的变化,分别为整层顺滚流结构和整层逆滚流结构;根据上述要素的特征及变化趋势对2011年针对福州市霾天气进行预报检验,取得一定的预报效果,霾日的预报准确率达77%。