Sedimentary record of polycyclic aromatic hydrocarbons in Lake Erhai, Southwest China

The temporal distribution of polycyclic aromatic hydrocarbons (PAHs) was investigated in a sediment core from Lake Erhal in Southwest China using gas-chromatography/mass spectrometry (GC/MS) method.The total organic carbon (TOC) normalized total PAHs concentrations (sum of US Environmental Protection Agency proposed 16 priority PAHs) ranged from 31.9 to 269 μg/g dry weight (dw),and were characterized by a slowly increasing stage in the deeper sediments and a sharp increasing stage in the upper sediments.The PAHs in the sediments were dominated by low molecular weight (LMW) PAHs,suggesting that the primary source of PAHs was low- and moderate temperature combustion processes.However,both the significant increase in high molecular weight (HMW) PAHs in the upper sediments and the vertical profile of diagnostic ratios pointed out a change in the sources of PAHs from low-temperature combustion to high-temperature combustion.The ecotoxicological assessment based on consensus-based sediment quality guidelines implied that potential adverse biological impacts were possible for benzo(ghi)perylenelene and most LMW PAHs.In addition,the total BaP equivalent quotient of seven carcinogenic polycyclic aromatic hydrocarbons (BaA,CHr,BbF,BkF,BaP,DBA and INP) was 106.1 ng/g,according to the toxic equivalency factors.Although there was no great biological impact associated with the HMW PAlls,great attention should be paid to these PAH components based on their rapid increase in the upper sediments.     

Unregulated emissions from diesel engine with particulate filter using Fe-based fuel borne catalyst

The alteration and formation of toxic compounds and potential changes in the toxicity of emissions when using after-treatment technologies have gained wide attention. Volatile organic compound（VOC）, carbonyl compound and particle-phase polycyclic aromatic hydrocarbon（PAH） emissions were tested at European Steady State Cycle（ESC） to study unregulated emissions from a diesel engine with a fuel-borne catalyst and diesel particulate filter（FBC–DPF）. An Fe-based fuel-borne catalyst was used for this study. According to the results, brake specific emissions of total VOCs without and with DPF were 4.7 and4.9 mg/kWh, respectively, showing a 4.3% increase. Benzene and n-undecane emissions increased and toluene emission decreased, while other individual VOC emissions basically had no change. When retrofitted with the FBC–DPF, total carbonyl compound emission decreased 15.7%, from 25.8 to 21.8 mg/kWh. The two highest carbonyls, formaldehyde and acetaldehyde, were reduced from 20.0 and 3.7 to 16.5 and 3.3 mg/kWh respectively. The specific reactivity（SR） with DPF was reduced from 6.68 to 6.64 mg/kWh. Total particle-phase PAH emissions decreased 66.4% with DPF compared to that without DPF. However, the Benzo[a]pyrene equivalent（BaPeq） with DPF had increased from 0.016 to 0.030 mg/kWh.Fluoranthene and Pyrene had the greatest decrease, 91.1% and 88.4% respectively. The increase of two- and three-ring PAHs with DPF indicates that the fuel-borne catalyst caused some gas-phase PAHs to adsorb on particles. The results of this study expand the knowledge of the effects of using a particulate filter and a Fe-based fuel-borne catalyst on diesel engine unregulated emissions.     

Mo-modified Pd/Al2O3 catalysts for benzene catalytic combustion

Mo-modified Pd/Al2O3catalysts were prepared by an impregnation method and tested for the catalytic combustion of benzene. The catalysts were characterized by N2 isothermal adsorption, X-ray diffraction（XRD）, X-ray photoelectron spectroscopy（XPS）, temperatureprogrammed desorption of NH3（NH3-TPD）, H2temperature-programmed reduction（H2-TPR）, and high-angle annular dark-field scanning transmission electron microscopy（HAADF-STEM）. The results showed that the addition of Mo effectively improved the activity and stability of the Pd/Al2O3catalyst by increasing the dispersion of Pd active components, changing the partial oxidation state of palladium and increasing the oxygen species concentration on the surface of catalyst. In the case of the Pd-Mo/Al2O3catalyst,benzene conversion of 90% was obtained at temperatures as low as 190°C, which was 45°C lower than that for similar performance with the Pd/Al2O3catalyst. Moreover, the 1.0% Pd-5% Mo/Al2O3catalyst was more active than the 2.0% Pd/Al2O3catalyst. It was concluded that Pd and Mo have a synergistic effect in benzene catalytic combustion.     

石化企业苯类物质非密闭操作过程的职业暴露分析

采用职业卫生学调查和职业暴露风险评估方法,对选定的苯类物质非密闭操作过程较集中的芳烃装置进行职业暴露分析和评估,为石化企业苯类物质的健康风险控制提供依据。     

顶空毛细柱气相色谱法测定水中七种苯系物研究

选用Elite-FFAP色谱柱,利用顶空-毛细柱气相色谱技术对水中的苯、甲苯、乙苯、对二甲苯、间二甲苯、邻二甲苯、苯乙烯七种挥发性苯系物进行同时测定,并对样品的平衡温度、保温时间、程序升温的条件控制、水中含盐量等影响因素进行了探讨,优化了检测条件,使七种挥发性苯系物得到不错的分离。样品平衡温度控制在70℃,样品平衡时间19 min,进样口温度180℃,检测器温度230℃,10 mL水样中加入4 g NaCl的条件下,分离效果最佳。     

环境空气中苯系物污染物的快速定量研究

本文采用便携式GC/MS仪器对大气中痕量苯系物污染物的快速定量分析进行研究。对比实验结果表明,全扫描和选择离子扫描两种扫描方式下苯系物测定结果的相对标准偏差分别在5.1%²8.4%和13%28.4%和13%¹9%之间,回收率范围分别为46%19%之间,回收率范围分别为46%¹86%和60%186%和60%¹10%,方法检出限范围分别为2.504110%,方法检出限范围分别为2.504¹0.63 ug/m3和0.49410.63 ug/m3和0.494².399 ug/m3。总体而言,选择离子扫描方式在测定结果的精密度与准确度上均优于全扫描方式。     

试析气相色谱法测定环境空气中苯系物的要点

随着我国城市化进程的不断加快,我国的环境污染问题越来越严峻。苯系物作为空气污染物中的重要一种,其对人体的健康有着非常大的危害。本文从气相色谱法测定环境空气中苯系物浓度的原理及方法出发,对影响测定结果的因素进行了分析。     

蚯蚓细胞色素P450酶系对土壤中芘或苯并[a]芘的响应

以赤子爱胜蚓(Eisenia fetida)为受试生物,通过人工污染草甸棕壤微宇宙试验方法,研究了暴露于不同环境浓度芘或苯并[a]芘(添加量分别为0.12、0.24、0.48、0.96 mg·kg~(-1))污染的土壤中14 d后,蚯蚓体内细胞色素P450(CYPs)酶系,如CYPs总量、CYP1A1及CYP2C9活性的变化.结果显示,芘或苯并[a]芘暴露导致蚯蚓CYPs总量、CYP1A1及CYP2C9活性的变化不同.其中,CYPs总量与CYP1A1活性对芘的响应趋势相似:试验3 d后,0.96 mg·kg~(-1)芘导致二者都显著高于对照水平;14 d后,都显著低于对照水平;CYP1A1活性对芘的响应更为敏感.CYPs总量与CYP2C9活性对苯并[a]芘的响应趋势相似:暴露初期,苯并[a]芘最高暴露剂量(0.96 mg·kg~(-1))导致二者都显著低于对照水平;试验结束后,苯并[a]芘最低暴露剂量(0.12 mg·kg~(-1))导致二者都显著高于对照水平,最高剂量暴露导致二者都显著低于对照水平,CYP2C9活性对苯并[a]芘的响应更为敏感.因此,推断CYPs亚酶对污染物的响应具有选择性且亚酶的响应敏感度高于CYPs总量.将CYPs总量与CYP1A1活性结合,或与CYP2C9活性结合分别诊断土壤芘污染或并[a]芘污染,较为准确有效.     

苯罐安全储存技术措施

液态苯极易燃烧爆炸,苯类化学事故造成的后果及影响极大,其安全储存涉及多方面技术措施.通过危险预知分析等方法,较详细地介绍了苯罐的安全储存温度和安全储存的技术措施.     

地下水中苯系物污染修复研究进展

苯系物(苯、甲苯、乙苯和二甲苯,BTEX)是重要的环境污染物之一。BTEX高溶解,高挥发,高毒性的特点使其成为地下水污染关注的特点。强调了地下水中苯系物的来源及相关性质,总结了治理苯系物的历史应用技术,介绍了新兴修复技术并展望了未来的发展方向,为地下水中苯系物的处理提供借鉴。