Effect of platinum on the photocatalytic degradation of chlorinated organic compound

TiO2 nanoparticles, doped with di erent Pt contents, were prepared by a modified photodeposition method using Degussa P-25 TiO2, H2PtCl6 6H2O and methanol as the solvents. The physicochemical properties of Pt/TiO2 were investigated by the nitrogen adsorption and desorption isotherm measurement technique, X-ray di raction analysis and photoluminescence spectra, respectively. Reaction rates from photocatalytic removal of dichloromethane over Degussa P-25 TiO2 and Pt/TiO2 were evaluated. The average diameter and BET surface area of the TiO2 catalyst particles were 300 nm and 50 m2/g, respectively. The degradation e ciency was 99.0%, 82.7%, 55.2%, and 57.9% with TiO2 at inlet concentrations of 50, 100, 200, and 300 ppm, respectively. And the degradation e ciency was 99.3%, 79.7%, 76.5%, and 73.4% with a 0.005 wt.% Pt/TiO2 at inlet concentrations of 50, 100, 200, and 300 ppm, respectively. In addition, we found that the photoluminescence emission peak intensities decreased with increases in the doping amount of Pt, which indicates that the irradiative recombination was weakened. Furthermore, the results showed that the UV/0.005 wt.% Pt/TiO2 process was capable of e ciently decomposing gaseous DCM in air.     

Potential particulate pollution derived from UV-induced degradation of odorous dimethyl sulfide

UV-induced degradation of odorous dimethyl sulfide (DMS) was carried out in a static White cell chamber with UV irradiation. The combination of in situ Fourier transform infrared (FT-IR) spectrometer, gas chromatograph-mass spectrometer (GC-MS), wide-range particle spectrometer (WPS) technique, filter sampling and ion chromatographic (IC) analysis was used to monitor the gaseous and potential particulate products. During 240 min of UV irradiation, the degradation e ciency of DMS attained 20.9%, and partially oxidized sulfur-containing gaseous products, such as sulfur dioxide (SO2), carbonyl sulfide (OCS), dimethyl sulfoxide (DMSO), dimethyl sulfone (DMSO2) and dimethyl disulfide (DMDS) were identified by in situ FT-IR and GC-MS analysis, respectively. Accompanying with the oxidation of DMS, suspended particles were directly detected to be formed by WPS techniques. These particles were measured mainly in the size range of accumulation mode, and increased their count median diameter throughout the whole removal process. IC analysis of the filter samples revealed that methanesulfonic acid (MSA), sulfuric acid (H2SO4) and other unidentified chemicals accounted for the major non-refractory compositions of these particles. Based on products analysis and possible intermediates formed, the degradation pathways of DMS were proposed as the combination of the O(1D)- and the OH- initiated oxidation mechanisms. A plausible formation mechanism of the suspended particles was also analyzed. It is concluded that UV-induced degradation of odorous DMS is potentially a source of particulate pollutants in the atmosphere.     

中心组合设计优化S-Cr-TiO2催化剂光降解工艺条件

在确定的温度和光照条件下,采用中心组合设计法研究了固相反应法合成的硫与铬共掺杂二氧化钛(S-Cr-TiO2)光催化剂与水溶苯胺蓝(ANB)可见光降解过程中的三个作用因子:催化剂的浓度、水溶苯胺蓝水溶液的pH值及其初始浓度之间的相互作用关系,得到了影响因子与降解速率之间的回归方程及因素之间相互作用的响应面图.结果表明,S...     

纳米零价铁铜双金属对铬污染土壤中Cr(Ⅵ)的还原动力学

采用液相还原法制备纳米零价铁铜双金属(n ZVI/Cu),通过扫描电子显微镜(SEM)和X射线衍射(XRD)对其进行形貌观测和表征分析,用制备的n ZVI/Cu修复Cr(Ⅵ)污染的土壤,研究了不同反应条件对修复效果的影响,探讨了还原动力学规律.结果表明,n ZVI/Cu对土壤中的Cr(Ⅵ)有很好的降解效果,反应初始p H为7,温度为30℃时,加入2 g·L~(-1)的n ZVI/Cu材料,在10 min内Cr(Ⅵ)含量为88 mg·kg~(-1)的污染土壤中的Cr(Ⅵ)去除率可以达到99%以上.改变n ZVI/Cu加入量、p H值、反应温度以及添加腐殖酸都会对Cr(Ⅵ)的去除效果产生影响.改变p H值和反应温度对去除土壤中Cr(Ⅵ)的影响都比较明显,p H值越小,反应温度越高Cr(Ⅵ)的去除效果越好,添加腐殖酸对去除土壤中的Cr(Ⅵ)有一定的影响.n ZVI/Cu降解Cr(Ⅵ)的过程符合伪一级还原动力学模型,还原速率与反应温度的关系符合阿仑尼乌斯(Arrhenius)定律,反应活化能Ea为104.26 k J·mol~(-1).     

Reaction mechanism and metal ion transformation in photocatalytic ozonation of phenol and oxalic acid with Ag+/TiO2

Photocatalytic ozonation of phenol and oxalic acid （OA） was conducted with a Ag^＋/TiO2 catalyst and different pathways were found for the degradation of different compounds. Ag^＋ greatly promoted the photocatalytic degradation of contaminants due to its role as an electron scavenger. It also accelerated the removal rate of OA in ozonation and the simultaneous process for its complex reaction with oxalate. Phenol could be degraded both in direct ozonation and photolysis, but the TOC removal rates were much higher in the simultaneous processes due to the oxidation of hydroxyl radicals resulting from synergetic effects. The sequence of photo-illumination and ozone exposure in the combined process showed quite different effects in phenol degradation and TOC removal. The synergetic effects in different combined processes were found to be highly related to the properties of the target pollutants. The color change of the solution and TEM result confirmed that Ag＋ was easily reduced and deposited on the surface of Tit2 under photo-illumination, and dissolved again into solution in the presence of ozone. This simple cycle of enrichment and distribution of Ag^＋ can greatly benefit the design of advanced oxidation processes, in which the sequences of ozone and photo-illumination can be varied according to the needs for catalyst recycling and the different properties of pollutants.     

Photocatalytic activity of Fe-doped CaTiO3 under UV-visible light

The photocatalytic degradation of methylene blue（MB） over Fe-doped CaTiO3 under UV-visible light was investigated. The as-prepared samples were characterized using X-ray diffraction（XRD）, scanning electron microscope（SEM） equipped with an energy dispersive spectrometer（EDS） system, Fourier transform infrared spectra（FT-IR）, and UV-visible diffuse reflectance spectroscopy（DRS）. The results show that the doping with Fe significantly promoted the light absorption ability of CaTiO3 in the visible light region. The Fe-doped CaTiO3 exhibited higher photocatalytic activity than CaTiO3 for the degradation of MB.However, the photocatalytic activity of the Fe-doped CaTiO3 was greatly influenced by the calcination temperature during the preparation process. The Fe-doped CaTiO3 prepared at500°C exhibited the best photocatalytic activity, with degradation of almost 100% MB（10 ppm）under UV-visible light for 180 min.     

贫营养条件下17β-雌二醇厌氧生物降解规律研究

17β-雌二醇作为环境甾体雌激素污染的主要污染物之一,广泛分布于自然环境中。采用批次实验,研究了在贫营养条件下17β-雌二醇厌氧生物降解规律。结果表明,在贫营养条件下,厌氧污泥对17β-雌二醇的去除率达到90%(35℃,76 d),且降解作用主要集中在快速降解阶段,降解规律符合一级降解动力学模型(R2=0.95);厌氧污泥对17β-雌二醇的去除主要是通过转化为雌性效力较低的雌酮,再由雌酮转化为其他的转化产物,如17α-雌二醇;Fe(Ⅲ)对17β-雌二醇的去除和转化没有显著的影响。接种污泥的内源代谢作用产生甲烷,Fe(Ⅲ)的存在可以提高甲烷的产率,但对甲烷的总量没有显著影响。     

厌氧共代谢分解难降解有机物的研究进展

文章介绍了厌氧共代谢的提出、作用机制、调控研究及应用现状,从共代谢技术的基质类型、菌群结构和代谢途径三方面综述了国内外有关厌氧共代谢作用机制的研究现状、发展趋势,并着重分析了厌氧共代谢的调控技术和应用情况,展望了厌氧共代谢技术的未来研究方向,为解决难降解有机污染物的治理瓶颈提供借鉴和参考。     

农田土壤酞酸酯的生物降解及真菌生长动态试验研究

室内模拟研究了农田土壤中酞酸酯(PAEs)含量、土壤基础呼吸量和真菌数量在PAEs降解过程中的变化。试验设对照(CK)、接种(JZ)和补种(BZ)3种处理,补接种的PAEs降解真菌(棒束梗霉属F3、芽枝状枝孢F4和爪哇正青霉F9)以每种2%的接种量加入土中,补种量与接种量相同,补种周期为20 d。结果表明,3种处理对土壤PAEs都有一定的降解作用,但接种和补种处理的土壤中4种复合PAEs总降解率分别比对照处理高出46.53%和51.54%。在试验周期内,补种处理的土壤麦角固醇含量维持在2.5~3.0μg/g,表明真菌数量稳定,而对照处理的土壤麦角固醇含量表现为先升高随后逐渐降低的趋势,60 d时下降到1.9μg/g;3种处理的土壤基础呼吸量也均呈下降趋势。因此,接种真菌可提高土壤PAEs的降解效率,而补种措施是保持土壤中真菌数量稳定的有效方法。     

MIL-101(Cr~(3+))可见光催化氧化降解甲基橙的研究

以金属有机多孔材料MIL-101(Cr3+)为非均相催化剂,过硫酸钠(Na2S2O8)为类Fenton体系的氧化剂,在可见光(300 W)下对甲基橙进行催化氧化降解研究。结果表明,MIL-101(Cr3+)在反应时间为120 min时对甲基橙降解率高达91.0%,且回收利用3次后仍表现出优异的降解性能(降解率达到81.0%)。同样条件下,把MIL-101(Cr3+)替换为TiO2或者不添加任何催化剂,甲基橙的降解率分别为25.6%和8.8%。采用紫外-可见漫反射光谱考察了常温下MIL-101(Cr3+)的禁带宽度大小,进一步证明其优异的光催化降解性能;同时还探讨了MIL-101(Cr3+)催化降解甲基橙的可能机理。