Metabolism of the Nonylphenol Isomer [Ring-U-14c]-4-(3′,5′-Dimethyl-3′-Heptyl)-Phenol by Cell Suspension Cultures of Agrostemma githago and Soybean

Abstract

The biotransformation of the nonylphenol isomer [ring-U-¹⁴C]-4-(3′,5′-dimethyl-3′-heptyl)-phenol (4-353-NP, consisting of two diastereomers) was studied in soybean and Agrostemma githago cell suspension cultures. With the A. githago cells, a batch two-liquid-phase system (medium/n-hexadecane 200:1, v/v) was used, in order to produce higher concentrations and amounts of 4-353-NP metabolites for their identification; 4-353-NP was applied via the n-hexadecane phase. Initial concentrations of [¹⁴C]-4-353-NP were 1 mg L^?1 (soybean), and 5 and 10 mg L^?1 (A. githago). After 2 (soybean) and 7 days (A. githago) of incubation, the applied 4-353-NP was transformed almost completely by both plant species to four types of products: glycosides of parent 4-353-NP, glycosides of primary 4-353-NP metabolites, nonextractable residues and unknown, possibly polymeric materials detected in the media. The latter two products emerged especially in soybean cultures. Portions of primary metabolites amounted to 19–22% (soybean) and 21–42% of applied ¹⁴C (A. githago). After liberation from their glycosides, the primary 4-353-NP metabolites formed by A. githago were isolated by HPLC and examined by GC-EIMS as trimethylsilyl derivatives. In the chromatograms, eight peaks were detected which due to their mass spectra, could be traced back to 4-353-NP. Seven of the compounds were side-chain monohydroxylated 4-353-NP metabolites, while the remaining was a (side-chain) carboxylic acid derivative. Unequivocal identification of the sites of hydroxylation/oxidation of all transformation products was not possible. The main primary metabolites produced by A. githago were supposed to be four diastereomers of 6′-hydroxy-4-353-NP (about 80% of all products identified). It was concluded that plants contribute to the environmental degradation of the xenoestrogen nonylphenol; the toxicological properties of side-chain hydroxylated nonylphenols remain to be examined.     

Some observations on copper yields and ore grades

The paper examines trends in the average copper content of mined ores over the years. It has tended to decline over the long term, but by no means evenly. US averages are not typical of global averages, at least in the past four decades. Those have been both higher, and less volatile than in the US. One reason for falling averages is a change in the type of deposit mined, with a rise in the share of relatively low grade porphyry deposits. The different nature of their deposits is reflected in marked differences in grades between the different continents. African and Australian average grades are higher than the global average, and changes in the share of Central Africa in global output have affected the global average grade. Yields are have been consistently lower in North America than elsewhere, and Latin American average grades have trended downwards, reflecting both the ageing of mines and the rising share of production from porphyry deposits. Typically the yield of mines declines over time as mining proceeds. The average copper content of ore deposits is usually below the average yield of the ore accessed in the early years of production. The initial grades of new mines have not declined over the past forty years, and there has been no perceptible tendency for the average grade of porphyry deposits brought into production to decline over time. There is no apparent correlation between average grade and deposit size, but mine operators tend to exploit economies of scale to offset low grades. The relationship between the annual percentage yields (the head grade) and the reserve grades of deposits is not static. In recent years head grades have fallen closer to reserve grades. The relationship may be affected by movements in metal prices. Although the evidence about the influence of prices is not clear-cut, it does suggest that prices and cut-off grades may be inversely related. As many ores contain other valuable metals besides copper, copper yields will sometimes be subordinated to the extraction of these other metals. Copper equivalent grades have not moved in the same way as copper grades alone.     

Enclave development and ‘offshore corporate social responsibility’: Implications for oil-rich sub-Saharan Africa

This paper critically reflects on the challenges of engaging, proactively, in Corporate Social Responsibility (CSR) in oil-rich sub-Saharan Africa. Most of the region's oil production takes place in enclave-type environments offshore and in countries ruled by autocratic governments which generally exert minimal pressure on companies to embrace CSR. With companies having little sense of who to target in their local economic development policies and programs, there is always a possibility of ‘offshore CSR’ – recognized here as potentially-effective ideas for improving social welfare that linger within the enclave and never fully materialize – surfacing. The aim is to conceptualize and broaden understanding of the challenge of developing CSR programs in these settings, where there are no clear linkages to communities or local economies more generally.     

Detection of transfluthrin and metofluthrin genotoxicity in the ST cross of the Drosophila Wing Spot Test

In this study, different concentrations of transfluthrin and metofluthrin have been assayed for genotoxicity by using the Wing Spot Test on Drosophila melanogaster. Standard cross was used in the experiment. Third-instar larvae that were trans-heterozygous for the two genetic markers mwh and flr³ were treated at different concentrations (0.0103 mg mL⁻¹, 0.103 mg mL⁻¹ for transfluthrin and 6 μg mL⁻¹, 60 μg mL⁻¹ for metofluthrin) of the test compounds. Feeding ended with pupation of the surviving larvae and the genetic changes induced in somatic cells of the wing’s imaginal discs lead to the formation of mutant clones on the wing blade. Results indicated that two experimental concentrations of transfluthrin and 60 μg mL⁻¹ metofluthrin showed mutagenic and recombinogenic effects in both the marker-heterozygous (MH) flies and the balancer-heterozygous (BH) flies.     

Toxicological characterization of the landfill leachate prior/after chemical and electrochemical treatment: A study on human and plant cells

In this research, toxicological safety of two newly developed methods for the treatment of landfill leachate from the Piškornica (Croatia) sanitary landfill was investigated. Chemical treatment procedure combined chemical precipitation with CaO followed by coagulation with ferric chloride and final adsorption by clinoptilolite. Electrochemical treatment approach included pretreatment with ozone followed by electrooxidation/electrocoagulation and final polishing by microwave irradiation. Cell viability of untreated/treated landfill leachate was examined using fluorescence microscopy. Cytotoxic effect of the original leachate was obtained for both exposure periods (4 and 24 h) while treated samples showed no cytotoxic effect even after prolonged exposure time. The potential DNA damage of the untreated/treated landfill leachate was evaluated by the comet assay and cytokinesis-block micronucleus (CBMN) assay using either human or plant cells. The original leachate exhibited significantly higher comet assay parameters compared to negative control after 24 h exposure. On the contrary, there was no significant difference between negative control and chemically/electrochemically treated leachate for any of the parameters tested. There was also no significant increase in either CBMN assay parameter compared to the negative control following the exposure of the lymphocytes to the chemically or electrochemically treated landfill leachate for both exposure periods while the original sample showed significantly higher number of micronuclei, nucleoplasmic bridges and nuclear buds for both exposure times. Results suggest that both methods are suitable for the treatment of such complex waste effluent due to high removal efficiency of all measured parameters and toxicological safety of the treated effluent.     

The removal of lignin and phenol from paper mill effluents by electrocoagulation

This study aims to investigate the treatment of paper mill effluents using electrocoagulation. Removal of lignin, phenol, chemical oxygen demand (COD) and biological oxygen demand (BOD) from paper mill effluents was investigated at various current intensities by using different electrodes (Al and Fe) and at various electrolysis times (1.0, 2.5, 5.0 and 7.5min). It was observed that the experiments carried out at 12V, an electrolysis time of 2min and a current intensity of 77.13mA were sufficient for the removal of these pollutants with each electrode. The removal capacities of the process using an Al electrode were 80% of lignin, 98% of phenol, 70% of BOD, and 75% of COD after 7.5min. Using an Fe electrode the removal capacities were 92%, 93%, 80% and 55%, respectively. In addition, it was found that removal of lignin, phenol, BOD and COD increased with increasing current intensity. In the experiments carried out at different current intensities, higher removal can be explained through a decrease in intra-resistance of solution and consequently an increase at the transfer speed of organic species to electrodes. It was also found that Al electrode performs higher efficiency than Fe electrode except for COD removal. However, the time required for removal of BOD was more than that of COD. The results suggest that electrocoagulation could be considered as an effective alternative to paper mill effluents treatment.     

部分取代苯类在江水中的生物降解与结构相关性研究

测定了２７种取代苯类化合物在松花江江水中的生物降解性．采用量子化学ＭＯＰＡＣ６．０－ＡＭ１法计算了化合物的分子量(ＭＷ)、生成热(Ｈｆ)、分子总表面积(ＴＳＡ)及最高占有轨道能(ＥＨＯＭＯ),结合辛醇/水分配系数ｌｇｐ及酸解离常数ｐＫａ对其中２２种化合物的ＢＯＤ值进行多元线性回归分析,得到如下模型:ＢＯＤ＝１０５．７３－０．４３９ＭＷ－０．０７６Ｈｆ－６．６６０ｌｇＰｎ＝２２,Ｒ２＝０．８２１,ＳＥ＝８．２５０,Ｆ＝２７．５６,Ｐ＝０．０００应用所得模型对其余５个化合物的生物降解性进行了预测．只有一个化合物的相对预测误差大于２０%,为２０．８%．平均预测误差为１２．４%．     

BOD生物传感器快速测定方法应用与探讨

介绍了微生物传感器快速测定生化需氧量(BOD)的方法,通过对标准溶液、工业废水、地表水、污水处理厂废水的检测,分析其精密度和准确度,通过与BOD_5的比对,对方法的存在问题及适用性进行了探讨和研究,为该方法的发展及其在环境监测中的实际应用提供了技术依据。