Dialdehyde starch and zein plastic: Mechanical properties and biodegradability

Dialdehyde starch (DAS) and zein, a hydrophobic corn protein, were investigated to produce biodegradable plastics with improved water resistance and mechanical properties. In the study, dialdehyde starch and zein ratio, plasticizers, and degree of starch oxidation were examined. Increased molding temperature and level of starch oxidation decreased water absorption of the plastic. Tensile strength and Young's modulus increased with starch oxidation. The biodegradation of starting materials and ground plastic specimens was studied in aerobic soil reactors maintained at 25°C for 180 days. Biodegradation of corn starch, zein, and dialdehyde starch for 180 days produced CO₂ equivalent to 64, 63, and 10% of theoretical carbon, respectively. Specimens of molded DAS and zein (3 : 1) plastic showed accelerated CO₂ evolution compared to DAS and other raw materials alone. By 180 days, specimens made with starch of low oxidation (1 and 5% oxidized) demonstrated a 60% biodegradation, and specimens with highly oxidized starch (90% oxidized) achieved 37% biodegradation.Paper presented at the Bio/Environmentally Degradable Polymer Society—Third National Meeting, June 6–8, 1994, Boston, Massachusetts.Journal Paper J-15927 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Project No. 3258.     

Synthesis of a block copolymer of poly(3-hydroxybutyrate) and poly(ethylene glycol) and its application to biodegradable polymer blends

A block copolymer {P[(R,S)-HB-b-EG]} of atactic poly[(R,S)-3-hydroxybutyrate] {P[(R,S)-HB]} and poly(ethylene glycol) (PEG) was prepared by the ring-opening polymerization of -butyrolactone in the presence of a macroinitiator (PEG/ZnEt₂/H₂O) which had been produced by the reaction of ,-dihydroxy PEG ( _n=3000) with ZnEt₂/H₂O (1/0.6) catalyst. The block copolymer ( _n=10,500, _w/ _n=1.2) was an A-B-A triblock copolymer comprising atactic P[(R,S)-HB] (A) and PEG (B) segments. The miscibility, physical properties, and biodegradability of binary blends of microbial poly[(R)-3-hydroxybutyrate] {P[(R)-HB]} with the block copolymer P[(R,S)-HB-b-EG] has been studied. The glass-transition temperature (T _g) data showed that the P[(R)-HB]/P[(R,S)-HB-b-EG] blend was miscible in the amorphous state. The P[(R)-HB] film became flexible and tough by means of blending with P[(R,S)-HB-b-EG] block copolymer. The enzymatic degradation of blend films was carried out at 37°C and pH 7.4 in a 0.1M phosphate solution of an extracellular PHB depolymerase fromAlcaligenes faecalis. The enzymatic degradation took place solely on the surface of the blend films.     

Determining C/N ratios for typical organic wastes using biodegradable fractions

It is well established that an optimal aerobic and anaerobic microbial metabolism is achieved with a C/N ratio between 20 and 30. Most studies are currently based on chemically-measured carbon and nitrogen contents. However, some organic wastes can be composed of recalcitrant carbon fractions that are not bioavailable. To know the biodegradable C/N ratio, two different methods to determine the aerobic and anaerobic biodegradable organic carbon (BOC_AE and BOC_AN) are proposed and used to analyze a wide variety of different organic samples. In general, raw wastes and digested products have more amount of BOC_AE. On the contrast, the samples collected after an aerobic treatment have higher content of BOC_AN. In any case, all the BOC fractions are lower than the total organic carbon (TOC). Therefore, the C/N ratios based on BOC are always lower than the total C/N ratio based on the TOC measure. The knowledge of the real bioavailable C/N ratio is crucial for the biological treatments of organic materials. To reduce the test time necessary for BOC determination, the values of BOC for all the samples obtained at different times were compared and correlated with the final BOC. A method that allows for the determination of BOC_AE in 4 d is proposed. In relation to the anaerobic assay, the biogas potential calculated after 21 and 50 d was positively correlated with the final potential defined after 100 d of assay.     

The Effect of Nanoclays on the Properties of PLLA-modified Polymers Part 1: Mechanical and Thermal Properties

Organically modified montmorillonite clays were incorporated at a 5% loading level into film grade of poly-L-lactic acid (PLLA) using a variety of masterbatches based on either semi-crystalline or amorphous poly-(lactic acid), as well as biodegradable aromatic aliphatic polyester. The PLLA masterbatches and compounded formulations were prepared using a twin screw compounding extruder, while the films were prepared using a single screw cast film extruder. The thermal and mechanical properties of the films were examined in order to determine the effect of the clay and different carriers on the polymer–clay interactions. In the optimal case, when a PLLA-based masterbatch was used, the tensile modulus increased by 30%, elongation increased by 40%, and the cold crystallization temperature decreased by 15 °C, compared to neat PLLA. The properties improvement of PLLA films containing nano clays demonstrated the possibility to extend the range of biodegradable film applications, especially in the field of packaging.     

Aromatic Copolyester-based Nano-biocomposites: Elaboration, Structural Characterization and Properties

Biodegradable polymers are one of the most promising ways to replace non-degradable polymers. But, to be a real alternative to classical synthetic polymers and find applications, biopolymer (biodegradable polymer) properties have to be enhanced. Nano-biocomposites, which are obtained by incorporation of nanofillers into a biomatrix, are an interesting way to achieve these improvements. Modified and unmodified montmorillonites have been introduced into a biodegradable aromatic copolyester, poly(butylene adipate-co-terephthalate) (PBAT). Structural characterization, thermal and mechanical tests have been carried out to understand better the relations between the nanofillers structuring and the final nano-biocomposite properties. Main results show that clay incorporation and the obtained intercalated structures improve PBAT properties (enhanced thermal stability, increased stiffness) and thus may increase the attractiveness of this biopolymer.     

Comparison of the weight-loss degradability of various biodegradable plastics under laboratory composting conditions

Eight kinds of biodegradable plastics were compared for their degradability in controlled laboratory composting conditions. A thin film of each plastic was mixed into the composting material, and weight-loss degradability was calculated from the weight changes of the film during composting. It was found that weight-loss degradability strongly depended on the specific kind of biodegradable plastic; two were very high, four moderate, and the remaining two very slight. The most easily degradable plastic degraded by as much as 81.4% over 8 days of composting. By comparing the weight-loss degradability with ultimate degradability, which is defined as a molar ratio of carbon loss as CO₂ to the carbon contained in the biodegradable plastic, the order of the ease of degradation of the biodegradable plastics differed. Received: February 7, 2000 / Accepted April 14, 2000     

Biodegradable dissolved organic carbon shapes bacterial community structures and co-occurrence patterns in large eutrophic Lake Taihu

Interactions between dissolved organic matter (DOM) and bacteria are central in the biogeochemical cycles of aquatic ecosystems; however, the relative importance of biodegradable dissolved organic carbon (BDOC) compared with other environmental variables in structuring the bacterial communities needs further investigation. Here, we investigated bacterial communities, chromophoric DOM (CDOM) characteristics and physico-chemical parameters as well as examined BDOC via bioassay incubations in large eutrophic Lake Taihu, China, to explore the importance of BDOC for shaping bacterial community structures and co-occurrence patterns. We found that the proportion of BDOC (%BDOC) correlated significantly and positively with the DOC concentration and the index of the contribution of recent produced autochthonous CDOM (BIX). %BDOC, further correlated positively with the relative abundance of the tryptophan-like component and negatively with CDOM aromaticity, indicating that autochthonous production of protein-like CDOM was an important source of BDOC. The richness of the bacterial communities correlated negatively with %BDOC, indicating an enhanced number of species in the refractory DOC environments. %BDOC was identified as a significant stronger factor than DOC in shaping bacterial community composition and the co-occurrence network, suggesting that substrate biodegradability is more significant than DOC quantity determining the bacterial communities in a eutrophic lake. Environmental factors explained a larger proportion of the variation in the conditionally rare and abundant subcommunity than for the abundant and the rare bacterial subcommunities. Our findings emphasize the importance of considering bacteria with different abundance patterns and DOC biodegradability when studying the interactions between DOM and bacteria in eutrophic lakes.     

Measuring the environmental impact of waste flow management in Brazilian apartment buildings

As biodegradable material represents approximately 70% of household waste in Brazil, any strategy to divert appreciable waste quantities from landfills of necessity has to include valorization and recycling of this material. A societal change of attitude is required to perceive this challenge. Experiments in an urban apartment building are described that produced this change of attitude with a success factor of 80%. Divided waste collection was implemented that separated at the source biodegradable from inert material. Correct collection, handling and display procedures were established. Composting of biodegradable material was carried out under the rooftop of the building as an alternative to using it as animal feed. Half of the inert material entered the reverse logistics chain and was also diverted from the landfill. Waste related material flow through the building is completely quantified, food intake and waste production are related, diversion of both biodegradable and inert waste components from the landfill is measured and the composting process is described. The landfill diversion stands at 61%, mass reduction through the composting process is 80% and matured compost is returned to residents for use in flower cages. The system has been operational for two years and stands out as a precedent in successful decentralized household waste management supported by material flow analysis. Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.     

高浓度有机氰废水的好氧可生化性研究

采用BODs／COD比值法和好氧呼吸曲线法在国内外首次针对高浓度有机氰废水及其污染物进行了全面的好氧可生化性的研究。结果表明，6种废水中，一段、二段急冷废水的可生化性能很差，很难用生化法进行处理I四效蒸发液，四效冷凝液可生化性较好适于生化处理，腈纶工艺废水在低浓度下，可以用生化法处理；高浓度有机氰废水中的9种污染物，丙烯腈、乙腈、丙烯酸、CN^-的好氧可生化性能较差，高浓度下对活性污泥有抑制作用，聚合物的可生化性能最差，根本无法被好氧生物降解。     

Enhancing sensitivity of microbial fuel cell sensors for low concentration biodegradable organic matter detection: Regulation of substrate concentration, anode area and external resistance

The relatively low sensitivity is an important reason for restricting the microbial fuel cell (MFC) sensors’ application in low concentration biodegradable organic matter (BOM) detection. The startup parameters, including substrate concentration, anode area and external resistance, were regulated to enhance the sensitivity of MFC sensors. The results demonstrated that both the substrate concentration and anode area were positively correlated with the sensitivity of MFC sensors, and an external resistance of 210 Ω was found to be optimal in terms of sensitivity of MFC sensors. Optimized MFC sensors had lower detection limit (1 mg/L) and higher sensitivity (Slope value of the linear regression curve was 1.02), which effectively overcome the limitation of low concentration BOM detection. The essential reason is that optimized MFC sensors had higher coulombic efficiency, which was beneficial to improve the sensitivity of MFC sensors. The main impact of the substrate concentration and anode area was to regulate the proportion between electrogens and nonelectrogens, biomass and living cells of the anode biofilm. The external resistance mainly affected the morphology structure and the proportion of living cells of the anode. This study demonstrated an effective way to improve the sensitivity of MFC sensors for low concentration BOM detection.