A Method for Measuring Degradation of Individual Components in Multicomponent Biodegradable Plastics by Fourier Transform Infrared Spectrometry

A new chemometric method based on Beer's law was derived that uses peak ratios from Fourier transform infrared spectra of neat polymers and their composite plastics to quantify degradation of the individual polymers after biodegradation. The method affords direct measurement of polymer concentrations and weight losses without prior calibration against known composites. Unlike traditional chemometric methods, this method does not require sampling of as many or more different composites as the number of polymers in the composite being analyzed. When the neat polymer spectra are known, only two measurements, one before and one after biodegradation, are needed. A potentially major advance is that the method allows automation of analytical infrared wavelength selection by computer from all possible wavelength combinations. In this paper, the theoretical basis and derivation of the mathematical model for multicomponent systems is presented. The validity of the model was proved initially by applying the method to simulated two-polymer and three-polymer composites and finally by comparing test results with known samples of biodegradable composites prepared in the laboratory. Potential future development of the method for more challenging multicomponent plastics is discussed.     

Mechanical Performance and Design Criteria of Biodegradable Low-tunnel Films

The overall mechanical behaviour of a series of experimental Mater-Bi made thin low-tunnel films is analysed with respect to the effect of two major factors: the film processing optimisation during manufacturing and the design of the low-tunnels structural system. The analysis of the mechanical behaviour of the biodegradable low-tunnel films, based on the results of extensive full-scale and small-scale experiments, combined with laboratory testing of the mechanical properties of the film, proves that a rather good mechanical behaviour is possible for these films, comparable to the behaviour of conventional agricultural films in terms of strength, provided that two criteria are met: (a) the low tunnel structural design is based on the initial stress at yield value of the film, which represents the asymptotic value of the tensile strength of the film, following its evolution with the time of exposure to real field conditions; (b) the processing of the film is optimised for the particular biodegradable material and film thickness under consideration. It is also confirmed that the stabilisation schemes used with conventional polyethylene films are not suitable for the biodegradable films.

废旧聚乙烯复合材料的制备与性能研究

介绍了废旧聚乙烯复合材料的制备与性能。以废旧聚乙烯为原材料,通过与超细白炭黑进行纳米复合,制备高性能纳米复合材料;利用木粉、竹粉、稻糠等植物纤维与其进行木塑复合,制备环保型木塑复合材料;重点研究了多单体接枝共聚物在复合材料中的界面改性作用。     

Evaluation of Poly(lactic acid) and Sugar Beet Pulp Green Composites

Poly(lactic acid) (PLA) and sugar beet pulp (SBP) were compounded by twin-screw extrusion and injection molded into composite forms. Specific mechanical energy decreased with the addition of SBP during processing. PLA–SBP composites retained more tensile strength than expected based on the Nicolais–Narkis model especially at high levels of SBP suggesting adhesion between SBP and PLA. The thermal characteristics of PLA were not affected by thermo-mechanical processing or by the incorporation of SBP up to 30% weight basis. PLA and PLA–SBP composites had similar tensile properties to other thermoplastic resins and may be used as a cost-competitive replacement.

Irradiation of sorbents by ions of polymorphic metals for modeling <Superscript>90</Superscript>strontium sedimentation

Background, Aims and Scope Advances in radioecology can support improvements in environmental remediation technologies, especially by illuminating interaction processes between polymorphic metal radionuclides and various materials and their ions in aqueous solutions. This study modeled interaction processes of ⁹⁰Sr with transitive metals to delineate the behavior of polymorphic metal radionuclides. Experimental and modeling results confirmed Sr sedimentation was sensitive to the physical impact of radionuclides on various sorbents and possible chemical reactions occurring between the radionuclides and sorbents. Methods Models were developed to simulate ⁹⁰Sr sedimentation process, and the potential physical and chemical reactions accompanying the process. Models were verified, inorganic salts were used as sorbents to absorb metal cations, activity levels were recorded before and after mixing the inorganic salts while the efficiency of sedimentation using the heavy metals composites was quantified. Results and Discussion This research demonstrates that the process of the sedimentation is complex and occurs in several stages. Micro-structural analysis shows that zones of interaction between the sorbent and source metal are formed during the irradiation of the target’s metal surface. Electrical-microscopic analysis indicates that the composition of the formed zones of interaction of Ti (Sr) with target metals has various structures. Roentgenophase analysis indicates that the interaction of the ions of a precipitable source and a target occurs according to constitution diagrams of equilibrium systems. The results indicate that application of inorganic salts composites based on modeling increases the efficiency of the deactivation of aqueous solutions when compared to standard aluminum sulfate composite. Conclusions Experimental and modeling results confirm ⁹⁰Sr sedimentation is sensitive to the physical impact of radionuclides on various sorbents and possible chemical reactions occurring between the radionuclides and sorbents. The models support estimation of the physical impact of polymorphic metal radionuclides on various components of sorbents and possible chemical reactions occurring between the radionuclides and sorbents during the interaction. Inorganic salt composites deactivate and clear ⁹⁰Sr and Sr⁺² from water. This paper is openly accessible!     

界面层对纤维增韧陶瓷基复合材料力学性能影响的研究进展

以短切碳纤维增韧陶瓷基复合材料、连续碳纤维增韧陶瓷基复合材料、碳化硅纤维增韧陶瓷基复合材料为对象,综述了近年来关于界面层对FTCMCs破坏模式影响的实验研究工作。从微观力学模型建立、多尺度损伤分析两方面总结归纳了考虑界面层的FTCMCs力学性能模拟分析方法,提出建立切合实际的物理模型以及开发更先进的多尺度分析方法,是解决复杂服役环境下FTCMCs性能表征难题的有效途径。通过多场耦合多尺度建模分析方法来表征和优化FTCMCs的复杂服役环境下性能,系统揭示界面层等微观结构与宏观复合材料性能的对应关系,进而指导工艺设计,均是未来纤维增韧陶瓷基复合材料界面层的重点研究方向。     

Study on the Physico-mechanical Properties of Photo-cured Chitosan Films with Oligomer and Acrylate Monomer

Chitosan films were prepared from dried prawn shell via chitin and then tensile properties like tensile strength (TS) and elongation at break (Eb) of the films were evaluated. Six formulations were developed using methyl methacylate (MMA) monomer and aliphatic urethane diacrylate oligomer (M-1200) in methanol along with photoinitator (Darocur-1664). Then the films were soaked in the formulations and irradiated under UV radiation at different doses for the improvement of physico-mechanical properties of chitosan films. The cured films were characterized by measuring TS, Eb, polymer loading (PL), water absorption and gel content properties. The formulation containing 43% MMA and 15% oligomer in methanol solution showed the best performance at 20th UV pass for 4 min soaking time.     

Recycling disposable cups into paper plastic composites

The majority of disposable cups are made from paper plastic laminates (PPL) which consist of high quality cellulose fibre with a thin internal polyethylene coating. There are limited recycling options for PPLs and this has contributed to disposable cups becoming a high profile, problematic waste. In this work disposable cups have been shredded to form PPL flakes and these have been used to reinforce polypropylene to form novel paper plastic composites (PPCs). The PPL flakes and polypropylene were mixed, extruded, pelletised and injection moulded at low temperatures to prevent degradation of the cellulose fibres. The level of PPL flake addition and the use of a maleated polyolefin coupling agent to enhance interfacial adhesion have been investigated. Samples have been characterised using tensile testing, dynamic mechanical analysis (DMA) and thermogravimetric analysis. Use of a coupling agent allows composites containing 40 wt.% of PPL flakes to increase tensile strength of PP by 50% to 30 MPa. The Young modulus also increases from 1 to 2.5 GPa and the work to fracture increases by a factor of 5. The work demonstrates that PPL disposable cups have potential to be beneficially reused as reinforcement in novel polypropylene composites.     

Remediation of toxic metal contaminated soil by washing with biodegradable aminopolycarboxylate chelants

Ex situ soil washing with synthetic extractants such as, aminopolycarboxylate chelants (APCs) is a viable treatment alternative for metal-contaminated site remediation. EDTA and its homologs are widely used among the APCs in the ex situ soil washing processes. These APCs are merely biodegradable and highly persistent in the aquatic environments leading to the post-use toxic effects. Therefore, an increasing interest is focused on the development and use of the eco-friendly APCs having better biodegradability and less environmental toxicity. The paper deals with the results from the lab-scale washing treatments of a real sample of metal-contaminated soil for the removal of the ecotoxic metal ions (Cd, Cu, Ni, Pb, and Zn) using five biodegradable APCs, namely [S,S]-ethylenediaminedisuccinic acid, imminodisuccinic acid, methylglycinediacetic acid, DL-2-(2-carboxymethyl) nitrilotriacetic acid (GLDA), and 3-hydroxy-2,2′-iminodisuccinic acid. The performance of those biodegradable APCs was evaluated for their interaction with the soil mineral constituents in terms of the solution pH and metal-chelant stability constants, and compared with that of EDTA. Speciation calculations were performed to identify the optimal conditions for the washing process in terms of the metal-chelant interactions as well as to understand the selectivity in the separation ability of the biodegradable chelants towards the metal ions. A linear relationship between the metal extraction capacity of the individual chelants towards each of the metal ions from the soil matrix and metal-chelant conditional stability constants for a solution pH greater than 6 was observed. Additional considerations were derived from the behavior of the major potentially interfering cations (Al, Ca, Fe, Mg, and Mn), and it was hypothesized that use of an excess of chelant may minimize the possible competition effects during the single-step washing treatments. Sequential extraction procedure was used to determine the metal distribution in the soil before and after the extractive decontamination using biodegradable APCs, and the capability of the APCs in removing the metal ions even from the theoretically immobilized fraction of the contaminated soil was observed. GLDA appeared to possess the greatest potential to decontaminate the soil through ex situ washing treatment compared to the other biodegradable chelants used in the study.     

海军航空器用树脂基复合材料海洋环境老化行为的研究

为了全面地了解国内外关于海军航空器用树脂基复合材料的海洋环境老化行为研究现状,以期能为我国的国防事业作出一定的贡献,在充分分析海洋环境的基础上,根据海军航空器中树脂基复合材料的具体使用情况,对相关研究文献及报告进行了大量的分析,总结了国内外树脂基复合材料在海洋环境中老化行为及寿命预测的研究进展。现阶段的研究主要集中在人工加速老化方面,对自然环境老化以及两种老化试验之间当量换算关系的研究还有待完善。同时,根据实际发展需要,对如何进一步开展树脂基复合材料在海洋环境中的老化研究提出了一些建议。