含信号控制人行横道的街道峡谷污染物扩散三维数值模拟

耦合微观交通仿真和机动车尾气排放模型,分别对含信号控制人行横道和不含信号控制人行横道的街道峡谷污染物排放进行计算,并以此为排放源,采用k-ε两方程模型与组分输运方程对风向与街道垂直时的污染扩散情况进行了三维数值模拟.结果表明,k-ε两方程模型与组分输运方程可以较好地模拟风向与街道垂直时三维街道峡谷内的污染物扩散情况.峡...     

Scale-up modeling of the twin roll casting process for AZ31 magnesium alloy

In the present study, a 2-D finite-element method (FEM) thermal-fluid-stress model has been developed and validated for the twin roll casting (TRC) of AZ31 magnesium alloy. The model was then used to quantify how the thermo-mechanical history experienced by the strip during TRC would change as the equipment was scaled up from a laboratory size (roll diameter = 355 mm) to a pilot scale (roll diameter = 600 mm) and to an industrial scale (roll diameter = 1150 mm) machine. The model predictions showed that the thermal history and solidification cooling rate experienced by the strip are not affected significantly by caster scale-up. However, the mechanical history experienced by the strip did change remarkably depending on the roll diameters. Casting with bigger rolls led to the development of higher stress levels at the strip surface. The roll separating force/mm width of strip was also predicted to increase significantly when the TRC was scaled to larger sizes. Using the model predicted results, the effect of both casting speed and roll diameter was integrated into an empirical equation to predict the exit temperature and the roll separating force for AZ31. Using this approach, a TRC process map was generated for AZ31 which included roll diameter and casting speed.     

基于CALPUFF模型的漳州市大气环境容量研究

研究表明：CALPUFF模式是运用于广域的大气扩散模型,在区域范围较大的复杂地形条件下的应用具有突出的优势.利用CALPUFF大气扩散模型模拟漳州市2009年气象场和污染物浓度场,采用监测值对模拟结果进行验证表明模型的适用性;基于现状污染源,建立大气污染物传递系数矩阵,结合线性优化法测算了不同环境空气质量标准下漳州市大气环境容量.     

基于等级全息建模的输油泵机组风险根源辨识*

为“挖掘”输油泵机组风险根源,降低设备预知性维护难度,结合输油泵多准则风险评价,提出1种基于等级全息建模的输油泵机组风险根源辨识方法,运用等级全息建模方法将输油泵系统分解为泵体结构、管理因素、环境因素、操作因素、技术因素、运行因素、设备安装7个子系统进行定性和定量分析。结果表明:相比危险与可操作性分析（HAZOP）、事故树分析（FTA）等传统风险辨识方法,等级全息建模（HHM）对轴承等关键部件以及压力等运行参数的监测更为深入,能够有效辨识输油泵机组高风险情景,提升输油泵的风险辨识效率。     

隧道救援站通风网络优化设计及人员疏散研究*

为确定铁路隧道救援站最佳通风结构,对烟道布置提出合理建议,采用计算流体力学（CFD）的方法,对铁路隧道救援站通风网络进行优化设计。同时,采用模拟计算的方法对救援站人员疏散进行模拟分析,确定救援横通道布置及防护门开度设置的合理性。研究结果表明:在同等通风参数工况设置下,采用多节点排烟竖井结构后各救援横通道流量分配更均匀,救援站压力平衡性更好,通风效率可提升15%;通过疏散模拟证实,在长560 m的紧急救援站范围内设置10条疏散横通道,横通道设1.7 m宽的逃生门能够满足疏散要求。     

Spatiotemporal Variability of Modeled Watershed Scale Surface‐Depression Storage and Runoff for the Conterminous United States

This study explores the viability of using simulated monthly runoff as a proxy for landscape‐scale surface‐depression storage processes simulated by the United States Geological Survey’s National Hydrologic Model (NHM) infrastructure across the conterminous United States (CONUS). Two different temporal resolution model codes (daily and monthly) were run in the NHM with the same spatial discretization. Simulated values of daily surface‐depression storage (treated as a decimal fraction of maximum volume) as computed by the daily Precipitation‐Runoff Modeling System (NHM‐PRMS) and normalized runoff (0 to 1) as computed by the Monthly Water Balance Model (NHM‐MWBM) were aggregated to monthly and annual values for each hydrologic response unit (HRU) in the CONUS geospatial fabric (HRU; n = 109,951) and analyzed using Spearman’s rank correlation test. Correlations between simulated runoff and surface‐depression storage aggregated to monthly and annual values were compared to identify where which time scale had relatively higher correlation values across the CONUS. Results show Spearman’s rank values >0.75 (highly correlated) for the monthly time scale in 28,279 HRUs (53.35%) compared to the annual time scale in 41,655 HRUs (78.58%). The geographic distribution of HRUs with highly correlated monthly values show areas where surface‐depression storage features are known to be common (e.g., Prairie Pothole Region, Florida).     

Comparison and Evaluation of Gridded Precipitation Datasets in a Kansas Agricultural Watershed Using SWAT

Gridded precipitation datasets are becoming a convenient substitute for gauge measurements in hydrological modeling; however, these data have not been fully evaluated across a range of conditions. We compared four gridded datasets (Daily Surface Weather and Climatological Summaries [DAYMET], North American Land Data Assimilation System [NLDAS], Global Land Data Assimilation System [GLDAS], and Parameter‐elevation Regressions on Independent Slopes Model [PRISM]) as precipitation data sources and evaluated how they affected hydrologic model performance when compared with a gauged dataset, Global Historical Climatology Network‐Daily (GHCN‐D). Analyses were performed for the Delaware Watershed at Perry Lake in eastern Kansas. Precipitation indices for DAYMET and PRISM precipitation closely matched GHCN‐D, whereas NLDAS and GLDAS showed weaker correlations. We also used these precipitation data as input to the Soil and Water Assessment Tool (SWAT) model that confirmed similar trends in streamflow simulation. For stations with complete data, GHCN‐D based SWAT‐simulated streamflow variability better than gridded precipitation data. During low flow periods we found PRISM performed better, whereas both DAYMET and NLDAS performed better in high flow years. Our results demonstrate that combining gridded precipitation sources with gauge‐based measurements can improve hydrologic model performance, especially for extreme events.     

Estimating Potential Climate Change Effects on the Upper Neuse Watershed Water Balance Using the SWAT Model

Climate change poses water resource challenges for many already water stressed watersheds throughout the world. One such watershed is the Upper Neuse Watershed in North Carolina, which serves as a water source for the large and growing Research Triangle Park region. The aim of this study was to quantify possible changes in the watershed’s water balance due to climate change. To do this, we used the Soil and Water Assessment Tool (SWAT) model forced with different climate scenarios for baseline, mid‐century, and end‐century time periods using five different downscaled General Circulation Models. Before running these scenarios, the SWAT model was calibrated and validated using daily streamflow records within the watershed. The study results suggest that, even under a mitigation scenario, precipitation will increase by 7.7% from the baseline to mid‐century time period and by 9.8% between the baseline and end‐century time period. Over the same periods, evapotranspiration (ET) would decrease by 5.5 and 7.6%, water yield would increase by 25.1% and 33.2%, and soil water would increase by 1.4% and 1.9%. Perhaps most importantly, the model results show, under a high emission scenario, large seasonal differences with ET estimated to decrease by up to 42% and water yield to increase by up to 157% in late summer and fall. Planning for the wetter predicted future and corresponding seasonal changes will be critical for mitigating the impacts of climate change on water resources.     

An application of a modified theory of planned behavior model to investigate adolescents’ job safety knowledge,norms, attitude and intention to enact workplace safety and health skills

Introduction: For many reasons, including a lack of adequate safety training and education, U.S. adolescents experience a higher rate of job-related injury compared to adult workers. Widely used social-psychological theories in public health research and practice, such as the theory of planned behavior, may provide guidance for developing and evaluating school-based interventions to prepare adolescents for workplace hazards and risks. Method: Using a structural equation modeling approach, the current study explores whether a modified theory of planned behavior model provides insight on 1,748 eighth graders’ occupational safety and health (OSH) attitude, subjective norm, self-efficacy and behavioral intention, before and after receiving instruction on a free, national young worker safety and health curriculum. Reliability estimates for the measures were produced and direct and indirect associations between knowledge and other model constructs assessed. Results: Overall, the findings align with the theory of planned behavior. The structural equation model adequately fit the data; most path coefficients are statistically significant and knowledge has indirect effects on behavioral intention. Confirmatory factor analyses suggest that the knowledge, attitude, self-efficacy, and behavioral intention measures each reflect a unique dimension (reliability estimates ≥0.86), while the subjective norm measure did not perform adequately. Conclusion: The findings presented provide support for using behavioral theory (specifically a modified theory of planned behavior) to investigate adolescents’ knowledge, perceptions, and behavioral intention to engage in safe and healthful activities at work, an understanding of which may contribute to reducing the downstream burden of injury on this vulnerable population—the future workforce. Practical application: Health behavior theories, commonly used in the social and behavioral sciences, have utility and provide guidance for developing and evaluating OSH interventions, including those aimed at preventing injuries and promoting the health and safety of adolescent workers in the U.S., who are injured at higher rates than are adults.     

System safety assessment using safety entropy

Safety assessment has a primary role in hazardous operations. Most studies on safety assessment focus on risk and accident modeling, in which safety is absent. These top-down methods are highly dependent on the occurred accidents to establish accidental scenarios, which may make the assessment approach lagging behind the evolving modern systems. Moreover, this “special to general” logic is scientifically suspect in safety assessment. There is a call for the development of safety assessment methods in the presence of system safety to complement risk-focused safety analysis. These methods should provide a framework based on a bottom-up approach to examine system safety from the operational perspective. This paper has attempted to provide a potential solution. In particular, a novel concept of safety entropy is proposed to integrate with The Functional Resonance Analysis Method (FRAM), which is used to form the qualitative understanding of a system. A formula consisted of safety entropy, functional conformability, and system complexity has been established to determine the spontaneity of the safety state-changing process. The proposed method is applied to the safety assessment of a propane feed-control system. The results show the applicability of the method. Nevertheless, the model still needs to be further improved to fulfill better support for safety-related decision problems.