生物法处理低浓度有机废气的填料选择研究

采用不锈钢环、瓷环、陶粒、塑料环、海藻石、轻质陶块、煤渣等作为填料的试验研究，结果表明七种填料的净化性能顺序为：海藻石＞轻质陶块＞陶粒＞瓷环＞不锈钢环＞煤渣＞塑料环。     

McCaffrey等估计轰燃前火灾温度方法的改进

在估计室内轰燃前火灾温度的多种方法中，McCaffrey等人提出的方法比较典型。该文根据内衬材料的热惯性对室内火灾的重要影响，在大量实验数据的基础上，对McCaffrey等人提出的这一方法进行了初步和理论上的改进；结合室内火灾的控制因素，对有机玻璃火灾的回归结果进行了进一步改进，提出了估计室内轰燃前火灾温度的新方法。     

秦皇岛市生态状况及资源开发利用水平分析综述

秦皇岛市区内生态类型多样,各类生态系统功能突出,自然资源丰富,尤其是海、旅游资源优势突出,为区域经济发展提供了良好的基础条件。该文对秦皇岛市生态系统平衡及资源开发利用水平进行了定量分析。     

Polymeric Complexes from Casein and Starch Phosphate: Characteristics and Enzyme Susceptibility

Novel biodegradable materials were prepared from potato starch enriched in phosphato moieties (DS 0.018 and 0.033) and casein in defatted milk. The components were blended in proportions providing starch: casein ratios of 2:1, 1:1, and 1:2 and were then precipitated with hydrochloric acid. Aqueous solubility, water-binding capacity, infrared spectra, and thermal analysis (thermogravimetry[7] and differential thermogravimetry of the precipitates revealed that they were not simple physical mixtures of the components. The components interacted with one another electrostatically with involvement of the phosphate groups of starch and the peptide bond of casein, as documented by infrared spectra. Because of insolubility in 7 M aqueous urea solution, they might also be considered as complexes in which the components were chemically bound.     

五大连池老黑山火山的两次喷发活动

老黑山是五大连池火山群中最年轻的火山.通过对老黑山火山锥体结构及其形态分析指出,老黑山火山并非单锥,而是由先、后不同时期形成的两个锥体叠加组成的复合锥,表明它有两次喷发活动.通过对新发掘出的史料的分析,进一步指出,老黑山火山的第一次喷发时间为1720(不是1719年)-1721年,第二次可能为1776年.两次喷发活动的确认为研究老黑山火山喷发历史、喷发过程、喷发危险性评价和灾害预测等提供了新依据.     

超高强度钻杆低温断裂性能及裂纹扩展特征研究

超高强度钻杆在冬季低温环境下容易发生脆性断裂事故,为了从断裂力学角度揭示其冷脆现象的本质,采用ZBC2302-D型示波冲击试验机,获得了不同温度下超高强度钢在冲击断裂过程中的力-位移曲线,并对比分析了冲击功、起裂功和裂纹扩展功之间的变化关系。采用国家标准GB 4161—2007中的计算公式,计算了冲击试样的裂纹扩展量Δa和阻抗应力强度因子K_R;同时,引入K_R阻力曲线,得到超高强度钻杆在不同温度下的剩余强度图。结果表明,当冲击试样开始出现裂纹时,随温度降低,钻杆的初始起裂应力有所增加,出现硬化现象。当钻杆出现一定长度的裂纹时,随温度降低,阻抗应力强度因子越来越小,而且降低速度越来越快,剩余强度也表现出相同的变化趋势。随温度降低,材料抵抗裂纹扩展的能力逐渐下降,表明钻杆在低温下更容易断裂。     

Leaching behaviour of different scrap materials at recovery and recycling companies: Full-, pilot- and lab-scale investigation

Scrap material recovery and recycling companies are confronted with waste water that has a highly fluctuating flow rate and composition. Common pollutants, such as COD, nutrients and suspended solids, potentially toxic metals, polyaromatic hydrocarbons and poly chlorinated biphenyls can exceed the discharge limits. An analysis of the leaching behaviour of different scrap materials and scrap yard sweepings was performed at full-scale, pilot-scale and lab-scale in order to find possible preventive solutions for this waste water problem. The results of these leaching tests (with concentrations that frequently exceeded the Flemish discharge limits) showed the importance of regular sweeping campaigns at the company, leak proof or covered storage of specific scrap materials and oil/water separation on particular leachates. The particulate versus dissolved fraction was also studied for the pollutants. For example, up to 98% of the polyaromatic hydrocarbons, poly chlorinated biphenyls and some metals were in the particulate form. This confirms the (potential) applicability of sedimentation and filtration techniques for the treatment of the majority of the leachates, and as such the rainwater run-off as a whole.     

How certain are we about the certainty-equivalent long term social discount rate?

Theoretical arguments for using a term structure of social discount rates (SDR) that declines with the time horizon have influenced government guidelines in the US and Europe. The certainty equivalent discount rate that often underpins this guidance embodies uncertainty in the primitives of the SDR, such as growth. For distant time horizons the probability distributions of these primitives are ambiguous and the certainty equivalent itself is uncertain. Yet, if a limited set of characteristics of the unknown probability distributions can be agreed upon, ‘sharp’ upper and lower bounds can be defined for the certainty-equivalent SDR. Unfortunately, even with considerable agreement on these features, these bounds are widely spread for horizons beyond 75 years. So while estimates of the present value of intergenerational impacts, including the social cost of carbon, can be bounded in the presence of this ambiguity, they typically remain so imprecise as to provide little practical guidance.     

Synthesis of branched,nano channeled,ultrafine and nano carbon tubes from PET wastes using the arc discharge method

Upcycling polymer wastes into useful, and valuable carbon based materials, is a challenging process. We report a novel catalyst-free and solvent-free technique for the formation of nano channeled ultrafine carbon tubes (NCUFCTs) and multiwalled carbon nanotubes (MWCNTs) from polyethylene terephthalate (PET) wastes, using rotating cathode arc discharge technique. The soot obtain from the anode contains ultrafine and nano-sized solid carbon spheres (SCS) with a mean diameter of 221 nm and 100 nm, respectively, formed at the lower temperature region of the anode where the temperature is approximately 1700 °C. The carbon spheres are converted into long “Y” type branched and non-branched NCUFCTs and MWCNTs at higher temperature regions where the temperature is approximately 2600 °C, with mean diameters of 364 nm and 95 nm, respectively. Soot deposited on the cathode is composed of MWCNTs with a mean diameter of 20 nm and other nanoparticles. The tubular structures present in the anode are longer, bent and often coiled with lesser graphitization compared to the nanotubes in the soot on the cathode.     

低碳经济背景下我国产业结构升级对策研究

为了实现我国经济的平稳发展,改变以"高消耗、高增长、高污染"的传统经济增长方式,解决资源的过度消耗和温室气体的过量排放等问题,文章从我国产业及内部结构、产业的碳排放量和产业节能率三个方面进行了分析,提出了在低碳经济背景下实现我国产业结构升级的对策。