NUMERICAL MODEL OF A TRACER TEST ON THE SANTA CLARA RWER,VENTURA COUNTY,CALIFORNIA1

ABSTRACT: To better understand the flow processes, solute-trans. port processes, and ground-water/surface-water interactions on the Santa Clara River in Ventura County, California, a 24-hour fluorescent-dye tracer study was performed under steady-state flow conditions on a 45-km reach of the river. The study reach includes perennial (uppermost and lowermost) subreaches and ephemeral subreaches of the lower Piru Creek and the middle Santa Clara River. The tracer-test data were used to calibrate a one-dimensional flow model (DAFLOW) and a solute-transport model (BLTM). The dye-arrival times at each sample location were simulated by calibrating the velocity parameters in DAFLOW. The simulations of dye transport indicated that (1) ground-water recharge explains the loss of mass in the ephemeral middle subreaches, and (2) ground-water recharge does not explain the loss of mass in the perennial uppermost and lowermost subreaches. The observed tracer curves in the perennial subreaches were indicative of sorptive dye losses, transient storage, and (or) photodecay - these phenomena were simulated using a linear decay term. However, analysis of the linear decay terms indicated that photodecay was not a dominant source of dye loss.     

Planning rural water services in Nicaragua: A systems-based analysis of impact factors using graphical modeling

The success or failure of rural water services in the developing world is a result of numerous factors that interact in a complex set of connections that are difficult to separate and identify. This research effort presented a novel means to empirically reveal the systemic interactions of factors that influence rural water service sustainability in the municipalities of Darío and Terrabona, Nicaragua. To accomplish this, the study employed graphical modeling to build and analyze factor networks. Influential factors were first identified by qualitatively and quantitatively analyzing transcribed interviews from community water committee members. Factor influences were then inferred by graphical modeling to create factor network diagrams that revealed the direct and indirect interaction of factors. Finally, network analysis measures were used to identify “impact factors” based on their relative influence within each factor network. Findings from this study elucidated the systematic nature of such factor interactions in both Darío and Terrabona, and highlighted key areas for programmatic impact on water service sustainability for both municipalities. Specifically, in Darío, the impact areas related to the current importance of water service management by community water committees, while in Terrabona, the impact areas related to the current importance of finances, viable water sources, and community capacity building by external support. Overall, this study presents a rigorous and useful means to identify impact factors as a way to facilitate the thoughtful planning and evaluation of sustainable rural water services in Nicaragua and beyond.     

Impacts of agri-environmental policy on land use and nitrogen leaching in Finland

Agri-environmental policies are challenging to be evaluated since they are often implemented in combination with other policies and regulations affecting agriculture. Also input and output markets affect agriculture. We provide impact assessment of agri-environmental scheme implemented in Finland 2007–2013 based on integrated economic and hydrological modelling and counterfactual scenarios. Development of crop specific fertilisation and land use changes, simulated using a multi-regional economic sector model, is included in a nutrient leaching model implemented in a typical agricultural region. Our results on agricultural production, land use, and nitrogen leaching show that the agri-environmental policy successfully mitigates nutrient leaching in intensive production regions but some mitigation potential is lost in less intensive regions.     

基于随机模拟的地下水污染物最优水力截获量

水力截获技术是净化或抑制地下水污染最为广泛使用的一种方法，而该技术实施过程中，如何确定最优水力截获量是其需要重点解决的关键问题.本文针对传统确定性方法计算最优水力截获量不合理的问题，从水文地质参数的随机性出发，应用基于随机理论的蒙特卡罗方法，通过实例来研究渗透系数的空间变异性对地下水污染物水力截获系统的影响，并寻求估算最优水力截获量的新方法.通过研究表明：基于确定性方法计算出最优水力截获量为110m³/d时恰好能完全截获污染区的污染物；应用随机模拟研究含水层渗透系数的空间变异性对水力截获系统的影响，发现当以传统确定性方法所计算的最优水力截获量（110m³/d）抽水时，并不能总是完全截获地下水污染物，其面临的稳定平均风险率高达24%；充分考虑了含水层渗透系数空间变异的Monte Carlo方法较以往传统确定性方法更为可靠，为此本文提出利用随机方法从截获系统可接受风险角度确定最优截获量的新思路.     

Foodgrain disposals as early warning famine signals: A case from Burkina Faso*

Recent research suggests that monitoring key events in social, economic, cultural and political systems may provide more timely, frequent, and reliable warnings of impending famine than monitoring physical processes alone. But empirical data on early warning distress signals in these arenas are slim. Based on anthropological investigations in a southern Volta Noire community of Burkina Faso (formerly Upper Volta) during the drought of 1983–1984, this paper outlines a variety of possible early warning signals in disposal systems for staple foodgrains - the nutritional “bottom line” for farmers and herders in the West African savannah. Pre-famine distress signals in five broad categories are discussed: changes in marketing patterns, non-market exchanges, dietary practices, utilization of agricultural and pastoral labour, and ideological and sociopolitical behaviours. Data consist of both quantitative and qualitative comparisons of cereal disposals in these categories between 1983 and preceding years.     

关于沈阳市沈河区环境噪声污染及综合治理研究

阐述了沈阳市沈河区环境噪声污染的现状和存在的问题，并提出了综合治理的对策。     

基于矿井通风三维仿真系统软件的矿用空气幕选型方法

根据矿井风流调节的具体要求,合理选择矿用空气幕的型号是应用矿用空气幕技术的关键。在分析矿用空气幕选型依据及原理的基础上,应用矿井通风三维仿真系统软件模拟矿用空气幕运行的效果,来研究确定矿用空气幕的选型参数及影响因素。结果表明,应用矿井通风三维仿真系统软件所选择的矿用空气幕与理论推导的计算结果一致,此方法能够最大限度地反映矿山实际情况,具有直观、高效等特点。     

Development and Validation of the Total HUman Model for Safety (THUMS) Toward Further Understanding of Occupant Injury Mechanisms in Precrash and During Crash

Objective: Active safety devices such as automatic emergency brake (AEB) and precrash seat belt have the potential to accomplish further reduction in the number of the fatalities due to automotive accidents. However, their effectiveness should be investigated by more accurate estimations of their interaction with human bodies. Computational human body models are suitable for investigation, especially considering muscular tone effects on occupant motions and injury outcomes. However, the conventional modeling approaches such as multibody models and detailed finite element (FE) models have advantages and disadvantages in computational costs and injury predictions considering muscular tone effects. The objective of this study is to develop and validate a human body FE model with whole body muscles, which can be used for the detailed investigation of interaction between human bodies and vehicular structures including some safety devices precrash and during a crash with relatively low computational costs.

Methods: In this study, we developed a human body FE model called THUMS (Total HUman Model for Safety) with a body size of 50th percentile adult male (AM50) and a sitting posture. The model has anatomical structures of bones, ligaments, muscles, brain, and internal organs. The total number of elements is 281,260, which would realize relatively low computational costs. Deformable material models were assigned to all body parts. The muscle–tendon complexes were modeled by truss elements with Hill-type muscle material and seat belt elements with tension-only material. The THUMS was validated against 35 series of cadaver or volunteer test data on frontal, lateral, and rear impacts. Model validations for 15 series of cadaver test data associated with frontal impacts are presented in this article. The THUMS with a vehicle sled model was applied to investigate effects of muscle activations on occupant kinematics and injury outcomes in specific frontal impact situations with AEB.

Results and Conclusions: In the validations using 5 series of cadaver test data, force–time curves predicted by the THUMS were quantitatively evaluated using correlation and analysis (CORA), which showed good or acceptable agreement with cadaver test data in most cases. The investigation of muscular effects showed that muscle activation levels and timing had significant effects on occupant kinematics and injury outcomes. Although further studies on accident injury reconstruction are needed, the THUMS has the potential for predictions of occupant kinematics and injury outcomes considering muscular tone effects with relatively low computational costs.     

The Contribution of Pre-impact Posture on Restrained Occupant Finite Element Model Response in Frontal Impact

Objective: The objective of this study was to discuss the influence of the pre-impact posture to the response of a finite element human body model (HBM) in frontal impacts.

Methods: This study uses previously published cadaveric tests (PMHS), which measured six realistic pre-impact postures. Seven postured models were created from the THUMS occupant model (v4.0): one matching the standard UMTRI driving posture as it was the target posture in the experiments, and six matching the measured pre-impact postures. The same measurements as those obtained during the cadaveric tests were calculated from the simulations, and biofidelity metrics based on signals correlation (CORA) were established to compare the response of the seven models to the experiments.

Results: The HBM responses showed good agreement with the PMHS responses for the reaction forces (CORA = 0.80 ± 0.05) and the kinematics of the lower part of the torso but only fair correlation was found with the head, the upper spine, rib strains (CORA= 0.50 ± 0.05) and chest deflections (CORA = 0.67 ± 0.08). All models sustained rib fractures, sternal fracture and clavicle fracture. The average number of rib fractures for all the models was 5.3 ± 1.0, lower than in the experiments (10.8 ± 9.0).

Variation in pre-impact posture greatly altered the time histories of the reaction forces, deflections and the rib strains, mainly in terms of time delay, but no definite improvement in HBM response or injury prediction was observed. By modifying only the posture of the HBM, the variability in the impact response was found to be equivalent to that observed in the experiments. The postured HBM sustained from 4 to 8 rib fractures, confirming that the pre-impact posture influenced the injury outcome predicted by the simulation.

Conclusions: This study tries to answer an important question: what is the effect of occupant posture on kinematics and kinetics. Significant differences in kinematics observed between HBM and PMHS suggesting more coupling between the pelvis and the spine for the models which makes the model response very sensitive to any variation in the spine posture. Consequently, the findings observed for the HBM cannot be extended to PMHS. Besides, pre-impact posture should be carefully quantified during experiments and the evaluation of HBM should take into account the variation in the predicted impact response due to the variation in the model posture.