阳离子乳液型清水剂的制备及其在油田污水处理中的应用

以二甲基二烯丙基氯化铵(DMDAAC)为阳离子单体,苯乙烯、丙烯酸丁酯为疏水单体,十六烷基三甲基溴化铵和聚氧乙烯辛基苯酚醚-10(OP-10)为乳化剂,过硫酸铵为引发剂,采用乳液聚合法制备乳液型清水剂。优化了制备清水剂的工艺条件,考察了清水剂对油田污水的处理效果。实验结果表明:在x(DMDAAC)小于20%、n(苯乙烯)∶n(丙烯酸丁酯)为2∶1、乳化剂占单体质量分数为5%、引发剂占单体质量分数为0.5%的优化条件下可制备形成稳定的阳离子乳液清水剂;分子量越大、x(DMDAAC)越大,清水剂的除油效果越好;在x(DMDAAC)为20%、其他最优条件不变的情况下制备的Q20清水剂使用浓度为30 mg/L时可使油田污水含油量从295 mg/L降至13 mg/L。自制清水剂的除油效果好于市售清水剂。     

活性炭纤维电极法处理印染废水的应用研究

采用新型催化电极处理了１８种水溶性及水不溶性染料液，并应用于数种实际扎染残液的处理，脱色率可达到９５％￣１００％，ＣＤＣｃｒ去除率达到４０％￣７０％。初步探讨了该电化学处理系统的反应机理，推论整个处理为吸附，自由基聚合和絮凝反应相结合的过程。     

Synthesis and identification of graft copolymers of wood pulp and styrene

Based on the graft copolymerization reactions of lignin and vinyl monomers, a series of graft copolymers of wood pulp and styrene (1-phenylethene) has been synthesized. The wood pulps used in this research are unbleached products produced by chemical, thermal, and mechanical pulping. All of them contain a high content of lignin (25–29 wt%). The grafting reaction is a free radical polymerization coinitiated by calcium chloride, hydrogen peroxide, and wood pulp in dimethylsulfoxide at 30°C. The effect of reaction temperature, reaction time, and the amount of the reactants on the conversion of monomer, yield of product, weight increase of pulp, and grafting efficiency of monomer has been studied. The grafted wood pulp was separated from homopolystyrene formed during the reaction by extraction of the reaction product with benzene in a Soxhlet apparatus for at least 48 h. The results show that after the reaction, the weight of all wood pulps was significantly increased and the weight increase of very high yield sodium bisulfite pulp (VHYS) was 333%. This proves that a part of the polymerized styrene was chemically bound to the wood pulp. The Fourier transform infrared (FTIR) spectra of the extracted products show absorbance peaks characteristic of both wood and polystyrene and, thus, provide strong proof of grafting. Grafting has completely changed the surface properties of the starting wood pulp from hydrophilic to hydrophobic, and under ordinary thermal compression conditions, thermoplastic composite objects of good uniformity can be made directly from reaction products which contain up to 52 wt% wood pulp.     

Enzyme-Based Vinyl Polymerization

In vitro enzyme-mediated polymerization of vinyl monomers is reviewed. Oxidoreductase enzymes have been used for the polymerization of styrene, derivatives of styrene, acrylates, and acrylamide in water and water-miscible co-solvents. Kinetic and mechanistic studies revealed that a ternary system (horseradish peroxidase, H₂O₂, initiator, or -diketone) is required for efficient polymerization and the initiator controls the polymer characteristics.     

Degradation of Cellulosic Materials Under the Alkaline Conditions of a Cementitious Repository for Low- and Intermediate-Level Radioactive Waste. II. Degradation Kinetics

The degradation of cellulosic materials, differing mainly in the degree of polymerization and the number of reducing end groups, was studied under the alkaline conditions similar to those existing in a cementitious repository for low- and intermediate-level radioactive waste (pH 13.3, T = 25°C). The kinetics of alkaline degradation (peeling-off reaction) were studied and the data analyzed by the model of Haas et al. [13]. The observed kinetic parameters for the propagation reaction and overall stopping reaction were compared with literature data. Although measured under different experimental conditions, literature data and data from this study show a consistent picture. Differences in the extent of degradation observed for the different cellulosic materials could be satisfactorily explained by differences in reducing end group content and, consequently, by differences in the degrees of polymerization. Besides the number of reducing end groups, the degree of amorphousness also plays an important role. The main degradation products formed under the experimental conditions used are - and -(gluco)isosaccharinic acid. This is in agreement with many other studies on alkaline degradation of cellulose. The two isomers are formed in roughly equal amounts.     

基于电聚合作用的脂质体免疫传感器检测水体中毒莠定的实验研究

利用脂质体包埋亚铁氰化钾,通过戊二醛交联毒莠定兔抗制成免疫脂质体,开发快速检测水中毒莠定的夹心型免疫传感器.在修饰电极的成分等方面优化传感器的工作参数,确定了Nation、多壁碳纳米管(multiwalled carbon nanotubes, MWCNTs)和毒莠定兔抗浓度的最优值分别为0.5%、10mg·mL-1、50μg·mL-1.免疫传感器的制作及测定过程如下:采用循环伏安法促使3,4-乙烯二氧噻吩(3,4-ethylendioxythiophene, EDOT)发生电聚合作用,将毒莠定兔抗直接固定到被修饰的玻碳电极上,电极再依次与待测水样和毒莠定兔抗修饰的免疫脂质体培育一定时间,最后利用TfitonX-100溶解与抗原结合的免疫脂质体,采用方波伏安法检测还原电流以反映毒莠定浓度,整个检测过程可以在70rain内完成.在0.1 mol·-1,的H3PO4中浸泡5 rain,可实现该传感器的良好再生.结果表明,毒莠定的检测下限达到了10-10mol·L-1,线性区间为10-10～10-4mol·L-1,适合饮用水中毒莠定浓度的检测要求.     

刚果红分子印迹聚合物纳米微球的合成及吸附性能

本研究以刚果红为模板分子,α-甲基丙烯酸(MAA)为功能单体,二甲基丙烯酸乙二醇酯(EGDMA)为交联剂,乙腈为致孔剂,2,2-偶氮二异丁腈(AIBN)为引发剂,采用沉淀聚合法制备了刚果红分子印迹聚合物纳米微球(MIP).通过扫描、透射电镜对聚合物的结构和形貌进行了表征,结果显示制备的MIP微球的粒径在90 nm左右,粒径较为均匀.利用氮气吸附脱附实验测定了聚合物颗粒的比表面积和孔容.并对诸多吸附影响因素以及分子印迹聚合物的吸附能力、选择性和重复利用率进行了分析.结果表明,MIP对刚果红表现出较好的选择性识别能力,可多次循环使用,能用于染料废水中刚果红的选择性吸附.     

水体中3种磺胺类药物对斑马鱼的生态毒性效应

采用斑马鱼作为模式动物,针对斑马鱼的代谢能力,进行3种磺胺类药物(磺胺甲恶唑,磺胺嘧啶,磺胺二甲嘧啶)的暴露实验。实验选取谷胱甘肽s-转移酶(GST)和丙二醛(MDA)含量作为评判斑马鱼代谢能力的指标。在实验过程中,随着暴露时间的改变,GST活性和MDA含量都呈现出不同的变化。在实验前3 d,GST酶活性在不同浓度下都呈现出显著增长。但是MDA的含量在第1天达到顶峰,随后都呈现出下降趋势。由结果可得,MDA含量指标对磺胺类药物的毒性更加敏感,其指示作用更优于GST活性指标。同时,实验结果中可以看出,在磺胺嘧啶作用下的GST酶活性和MDA含量都呈现更加明显的变化,因此实验推断磺胺嘧啶会对水环境具有更潜在的危害。     

PVDF ultrafiltration membranes of controlled performance via blending PVDF-g-PEGMA copolymer synthesized under different reaction times

PVDF blended different graft ratio of PVDF-g-PEGMA were systematically studied. Tuning the amphiphilic copolymer synthesis time to control membrane performance. The PVDF membrane with PVDF-g-PEGMA at 19 h possesses most surface oxygen content. The synthesis time of PVDF-g-PEGMA at 9 h is good for high flux UF membrane. Polyvinylidene fluoride grafted with poly(ethylene glycol) methyl ether methacrylate (PVDF-g-PEGMA) was synthesized using atomic transfer radical polymerization (ATRP) at different reaction times (9 h, 19 h, and 29 h). The corresponding conversion rates were 10%, 20% and 30%, respectively. PVDF was blended with the copolymer mixture containing PVDF-g-PEGMA, solvent and residual PEGMA under different reaction times. In this study, we explored the effect of the copolymer mixture additives with different synthesis times on cast membrane performance. Increasing the reaction time of PVDF-g-PEGMA causes more PVDF-g-PEGMA and less residual PEGMA to be found in the casting solution. Incremental PVDF-g-PEGMA can dramatically increase the viscosity of the casting solution. An overly high viscosity led to a delayed phase inversion, thus hindering PEGMA segments in PVDF-g-PEGMA from migrating to the membrane surface. However, more residual PEGMA contributed to helping more PEGMA segments migrate to the membrane surface. The pure water fluxes of the blended membrane with reaction times of 9 h, 19 h, and 29 h are 5445 L·m⁻²·h⁻¹, 1068 L·m⁻²·h⁻¹and 1179 L·m⁻²·h⁻¹, respectively, at 0.07 MPa. Delayed phase inversion can form smaller surface pore size distributions, thus decreasing the water flux for the membranes with PVDF-g-PEGMA at 19 h and 29 h. Therefore, we can control the membrane pore size distribution by decreasing the reaction time of PVDF-g-PEGMA to obtain a better flux performance. The membrane with PVDF-g-PEGMA at 19 h exhibits the best foulant rejection and cleaning recovery due to its narrow pore size distribution and high surface oxygen content.     

Anti-fouling ultrafiltration membrane prepared from polysulfone-graft-methyl acrylate copolymers by UV-induced grafting method

Membrane fouling is one of the most important challenges faced in membrane ultrafiltration operations. The copolymers of polysulfone-graft-methyl acrylate were synthesized by homogeneous photo-initiated graft copolymerization. The variables affecting the degree of grafting, such as the time of UV(Ultraviolet-visible)irradiation and the concentrations of the methyl acrylate and photoinitiator, were investigated. The graft copolymer membranes were prepared by the phase inversion method. The chemical and morphological changes were characterized by attenuated total reflection-Fourier transform infrared spectroscopy(ATR/FT-IR), scanning electron microscopy, and water contact angles measurements. Results revealed that methyl acrylate groups were present on the membranes and the graft degree of methyl acrylate had remarkable effect on the performance of membranes. Pure water contact allgle on the membrane surface decreases with the increase of methyl acrylate graftdegree. which indicated that the hydrophilicity of graft copolymer membranes Was improved. The permeation fluxes of pure water and bovine serum albumin solution were measured to evaluate the antifouling property of graft copolymer membranes, the results of which have shown an enhancement of antifouling property for graft copoly mermembranes.