大力发展循环经济促进宁阳县可持续发展

宁阳县发展循环经济过程中所取得的初步成果,同时对当前存在的突出问题,提出了相应的对策和改进措施:制定促进循环经济发展的相关政策;构筑循环经济基本模式,推动建立生态工业园;建立循环经济发展的技术支撑体系;制定发展循环经济的长远规划;提高全民发展循环经济意识和公众参与水平.     

Performance evaluation of reverse logistics enterprise – an agent-based simulation approach

Reverse logistics (RL) has been applied in many industries and sectors since its conception. Unlike forward logistics, retracing consumer goods from the point of consumption to the point of inception is not a well-studied process. It involves many uncertainties such as time, quality and quantity of returns. The returned products can be remanufactured, have parts harvested, or be disposed safely. It is important to implement these activities in a cost-effective manner. The aim of this research is to measure the performance of the RL enterprise with the help of an agent-based simulation model. The major entities in the RL network are considered as Agents that can act independently. There are several different agents: collector agent, sorting-cum-reuse agent, remanufacturing agent, recycler agent, supplier agent and distributor agent. The individual performances of the agents are measured and recommendations are given to improve their performance, leading to the enhancement of the total performance of the RL enterprise. The approach is applied to a case study involving cell phone remanufacturing.     

Recycling-oriented characterization of plastic frames and printed circuit boards from mobile phones by electronic and chemical imaging

This study characterizes the composition of plastic frames and printed circuit boards from end-of-life mobile phones. This knowledge may help define an optimal processing strategy for using these items as potential raw materials. Correct handling of such a waste is essential for its further “sustainable” recovery, especially to maximize the extraction of base, rare and precious metals, minimizing the environmental impact of the entire process chain. A combination of electronic and chemical imaging techniques was thus examined, applied and critically evaluated in order to optimize the processing, through the identification and the topological assessment of the materials of interest and their quantitative distribution. To reach this goal, end-of-life mobile phone derived wastes have been systematically characterized adopting both “traditional” (e.g. scanning electronic microscopy combined with microanalysis and Raman spectroscopy) and innovative (e.g. hyperspectral imaging in short wave infrared field) techniques, with reference to frames and printed circuit boards. Results showed as the combination of both the approaches (i.e. traditional and classical) could dramatically improve recycling strategies set up, as well as final products recovery.     

西安市建筑垃圾渣土资源再利用研究

建筑垃圾渣土作为"建筑副产品",已造成严重的城市环境问题。通过对西安市建筑垃圾渣土的现场调查及工程再利用,借鉴发达国家及国内省市建筑垃圾渣土的成功管理经验和资源再利用的成功范例,提出了西安建筑垃圾资源再利用的对策建议,对"十三五"期间减少已有建筑垃圾的存量并遏制增量和建设西安森林城市具有参考意义。     

构建中国快递行业包装废弃物产业链对环境影响重要性研究

互联网和电子商务的快速发展带动了快递行业的飞速发展,使社会对快递包装物的需求增加.庞大的快递废弃物给环境造成了严重的破坏.然而由于相关法律不健全、回收体系不完整、企业不积极以及回收渠道少等原因导致了中国的快递包装废弃物回收率非常低.构建快递包装废弃物回收产业链,并降低快递包装废弃物对环境造成的影响就成了社会经济发展的一个迫切需要.为此推广环保材料和环保产品以及提高消费者环保意识入手,构建快递包装废弃物回收产业链势在必行.     

再生水灌溉土壤人工合成麝香累积模型模拟

人工合成麝香(HHCB/AHTN)是近几年来受关注较多的药品与个人护理品(PPCPs)类新型污染物之一,再生水灌溉是HHCB/AHTN输入土壤的主要途径.本研究结合再生水灌溉土壤的实地检测结果,采用HYDRUS-1D模型,模拟了长期灌溉再生水条件下土壤中HHCB和AHTN的迁移转化和累积趋势.结果表明,尽管土壤中这两种麝香的含量极低,但是再生水灌溉土壤中的含量是自来水灌溉土壤的5倍;再生水灌溉下HHCB/AHTN累积趋势从lgKoc较低为3.44时的指数型增加,到lgKoc较高为4.12和4.86时的线性增加;半衰期的变化对再生水灌溉途径输入土壤的HHCB/AHTN的表层累积影响并不明显;再生水灌溉下土壤中HHCB/AHTN的垂直迁移能力较小,灌溉40 a以后最大迁移距离只有53 cm,且受Koc变化的影响较大;通过灌溉水途径进入土壤的HHCB和AHTN通过生物降解与植物吸收途径消解的比例较低,最高只占输入总量的7.69%,但是随着lgKoc的减小和灌溉时间增加,通过生物降解和根系吸收的消解率增加.本研究结果能够为准确评估再生水灌溉途径引起的土壤中人工合成麝香HHCB/AHTN的生态风险提供依据.     

日本交通部门碳排放与低碳交通相关因素研究

本文就日本向低碳社会体系转型的过程中,交通部门碳排放现状、都市交通体系构成、实施对策等方面进行了分析,探讨其交通运输领域低碳交通的相关因素及发展模式,为中国低碳交通体系的构建提供参考。     

平板显示器回收的新挑战

显示屏（监视器和电视机）经历了从阴极射线管到平板显示器技术的快速变化。截至目前为止,只有少量的平板显示器已记录在废物收集点。平板显示器的数量越来越多,在未来需要足够的用于回收的基础设施。本文旨在通过液晶显示屏幕的回收对经济影响的案例研究来提供数量、成分、回收利用技术和经验的基本数据。对于组件和材料也适用于其他类型的电子产品,如黑色金属和有色金属,印刷电路板或电缆,回收途径和技术是众所周知的和可用的。目前,液晶显示器（LCD）在欧洲不回收。处置时,例如,通过焚烧,有价值的材料,其成分是不再可用。例如：铟具有重要战略意义的应用,如,太阳能光伏作为一种稀缺资源。液晶显示器在欧洲具有回收基础设施,因此是有用的。     

废弃产品回收处理企业环境绩效评价初探

近年来,废弃产品回收处理行业日益受到政府和社会各界的关注,而回收处理企业是实施回收处理活动的主体,相关法律、法规的出台对回收处理企业提出了更高的要求。本文在概括梳理相关法律、法规的基础上,初步建立了废弃产品回收处理企业环境绩效评价指标体系,为回收处理企业采用先进的技术工艺、降低环境负荷、加强职业健康监护和企业环境管理提供参考,以适应国家政策要求和行业发展的需要。     

Reducing sulfates concentration in the tannery effluent by applying pollution prevention techniques and nanofiltration

The use of large quantities of sulfuric acid and other sulfur-containing chemicals causes high sulfate concentrations in the wastewater of a tannery. The aim of this work was reducing the sulfate concentration in the final wastewater from a tannery. For that, firstly a study about the main sulfate sources in a tannery was carried out and the total sulfates load in the tannery wastewater was evaluated. Two measures for sulfates reduction were studied: the recycling of unhairing wastewater to the soaking drums and the reuse of the chromium sulfate from the tanning washing wastewater after its separation by nanofiltration (NF). The first measure proposed was studied experimentally in laboratory drums of 5 L of volume. Two series of experiments with different volumes of unhairing wastewater in the soaking bath were carried out. The quality of the final leather was evaluated by means of mechanical tests. NF experiments were carried out in a laboratory pilot plant with a spiral wounded membrane element. Concerning the results, the combination of 50% unhairing wastewater and 50% of fresh water was appropriate in order to obtain leather with an acceptable quality. Besides, it drove to a diminution of approximately 10% in the addition of sulfide in the unhairing. Related to the NF experiments, 97% of the sulfates were rejected by the membrane. The separated ions could be recycled to the tanning drums. The application of the two measures (firstly the recycling of the unhairing wastewater and secondly the NF of the tanning washing wastewater) drove to a reduction of 14.82 kg SO₄⁻² t⁻¹ of raw hide.